Community AlphaAlpha MUADMINS
VITiếng Việt
Đăng nhập
Trên MuADMINSConfig ScannerTải lên zip file của bạn: rate, rơi đồ, spot, giới hạnMởTrên MuADMINSGặp chúng tôi trên DiscordNhờ giúp đỡ, chia sẻ những gì bạn đang làm và trò chuyện về MU với các chủ server khác.Mở

MuADMINS

Giải pháp

Các cách sửa ngắn gọn cho những lỗi thường gặp của server, client và website MU Online, mỗi cách đều kèm nguồn và ngày. “Đã xác nhận” nghĩa là người đặt câu hỏi cho biết cách sửa đã hiệu quả.

38 giải pháp cho “loginserver connect fail” · Xóa lọc

  1. Cài đặt serverS3E1 (1.04H)

    GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)

    The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2008-06-03
  2. Cài đặt server

    "login server connect fail" when the server starts the GameServer

    The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2009-11-04
  3. Cài đặt serverIGCNS9

    IGCN S9 E2 repack: DataServer says 'Login failed for user ...' (SQLSTATE 28000) and 'DATA SERVER CANNOT CONNECT TO MSSQL'

    1. The repack DataServer config came with a SQL login that does not exist on your SQL Server (here a random name like D2a78Rtko0), so the login fails. 2. Open the database settings of the...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2019-07-14
  4. Công cụWebZen 97d / 99b97d

    MuEditor 2.1 / MuMaker: 'SQL Connection failed' with a 97d+99i server, even when run as administrator

    1. Running the editor as administrator did not help. 2. The editors connect through the ODBC data sources of the server (MuOnline, MuOnlineJoinDB and so on), so these must be registered c...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2016-05-07
  5. Cài đặt serverIGCN

    IGCN License Manager: what the GameServer license errors mean (Cannot connect to Auth Server, Time Check Failed, IP Address or HWID not found, Activation Time is over)

    1. Cannot connect to Auth Server (first connect) or Failed to connect to any of auth servers (reconnect): check that the subscription is active, that the IPs in the license data on the Li...

    MuADMINS viết lại từ nguồnNot verifiedIGCN · 2022-03-28
  6. Client gameMuEmu / LouisS5.2

    Main 5.2 (Louis) with MuServer Update 15: 'WriteValidation > ProtocolSend Connect [0] Read Header Fail:End of file' when the client connects

    1. The asker fixed it (with help from son1xx2 on RaGEZONE) by building both the GameServer and the main without the new protocol system. 2. In the server source set #define NEW_PROTOCOL_S...

    ✓ Đã xác nhận trong issueGitHub (LouisEmulator/Main5.2) · 2022-11-23
  7. Gameplay

    Players are disconnected inside Blood Castle; the GameServer log shows 'create monster fail - wrong map [173]'

    1. The Blood Castle monsters in the monster spawn XML were edited and some entries point to map code 173, which does not exist, so spawning them fails and players are dropped. 2. Revert e...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2024-02-14
  8. Client gameSeason 6

    "Connect Failed" when you start the client on the PC that runs the server (No-IP address)

    With a No-IP (dynamic DNS) name in the client, players outside can connect, but the PC that runs the server often cannot, because most home routers do not route your public address back i...

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2021-04-15
  9. Công cụ

    MuCore install: "Connection with MuOnline Database Failed" and "Extension php_mssql.dll must be enabled"

    1. MuCore needs a PHP that still has the old php_mssql.dll extension: in php.ini find extension=php_mssql.dll and remove the ; in front of it. 2. If your web server package has no php_mss...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2011-03-05
  10. Công cụ

    MuMaker: "Login failed for user 'sa'. Reason: Not associated with a trusted SQL Server connection."

    1. The error means SQL Server only accepts Windows logins, so the sa login that MuMaker uses is refused. 2. Change the SQL Server authentication to SQL Server and Windows Authentication m...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2008-01-29
  11. Cài đặt server0.97d

    97d GameServer on a VPS says 'Failed to connect to SQL Server' although the SQL login, the MuOnline database and the IPs look correct

    The database and the SQL settings were fine; the IP passed to GameServer.exe in its shortcut was the problem. 1. Right-click the GameServer.exe shortcut you start the server with and open...

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2021-02-08
  12. Cài đặt server

    How to change the ConnectServer port 44405, and login fails after changing it

    1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2010-12-21
  13. Websiteany

    MuCore 2.2.0 installer stops with 'SQL Failed' at the connection step.

    1. Open TCP port 1433 in the Windows firewall. 2. In SQL Server Configuration Manager enable Named Pipes and TCP/IP, set IPAll TCP Port 1433. 3. Restart SQL Server and run the installer a...

    ✓ Được người mở chủ đề xác nhậnTuServerMU · 2019-07-27
  14. Công cụWebZen 97d / 99b1.02-1.03

    main.exe hex edit: how to change the serial and the connect IP of an old main (1.02 / 1.03 era) with a hex editor

    1. Open main.exe in a hex editor, press Ctrl+F, tick Find ASCII and search failed to connect: the 16 character serial is next to it. 2. Replace the serial with your own using exactly 16 c...

    MuADMINS viết lại từ nguồnNot verifiedRaGEZONE · 2007-08-19
  15. Cài đặt serverMuEmu / LouisS6

    MuEmu S6 on a VPS: the client works inside the VPS, but from home it shows the antihack logo, says it could not connect and closes.

    1. When it works on the VPS itself but not from outside, the Windows Firewall of the VPS is the usual cause. 2. On the VPS, create inbound TCP allow rules for the ConnectServer port (4440...

    ✓ Được người mở chủ đề xác nhậnTuServerMU · 2018-11-18
  16. Websiteany

    WebEngine 1.0.9 with a remote SQL Server IP fails with 'Could not connect to database (1)', while MuCore connects to the same server without problems.

    1. In the WebEngine installer select the ODBC driver instead of dblib/sqlsrv. 2. Make sure the matching PHP ODBC extension is enabled and port 1433 is reachable. 3. Finish the install.

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2017-09-09
  17. Công cụS6

    WebEngine CMS installer: "Could not connect to database (1)" at the database step with MSSQL Server 2008 (PDO ODBC, XAMPP)

    1. In this case the game files connected fine but the WebEngine installer kept failing on the database step, with no error in the SQL logs or the Windows event log. 2. The cause was a con...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2023-10-06
  18. Công cụ

    MuMaker: "Login failed for user 'sa'" although the server runs and the password is right (only one MuMaker build works)

    1. Check that the sa login has rights on the MU databases and that the password in the MuMaker Config.ini is right. 2. If it still says login failed, the MuMaker build does not fit your s...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2011-06-30
  19. Cài đặt serverIGCNS9

    IGCN S9 E2 repack: 'No active Game Servers found' and disconnect when the server settings use a DDNS hostname

    1. Put the real (numeric) IP address in the GameServer and server list settings instead of the DDNS hostname. 2. Restart the ConnectServer and GameServer and connect again. 3. If you must...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2018-12-29
  20. Websiteany

    MuCore on a web host cannot connect to the MuOnline database on a Google Cloud VPS (Connection with MuOnline Database Failed), although 1433 is open in Windows.

    1. Enable TCP/IP and Named Pipes for the instance in SQL Server Configuration Manager and restart SQL. 2. Open TCP 1433 in the Windows firewall of the VPS. 3. Also open TCP 1433 in the cl...

    ✓ Được người mở chủ đề xác nhậnTuServerMU · 2019-03-17
Vẫn còn vướng mắc? Hỏi Trợ lý MU Tìm trên MuGPS Tìm trên MUTube

MuADMINS Community Alpha: miễn phí, do cộng đồng xây dựng, đang được phát triển tích cực.