Community AlphaAlpha MUADMINS
PLPolski
Zaloguj się
Na MuADMINSConfig ScannerWgraj zip swoich plików: rates, dropy, spoty, limityOtwórzNa MuADMINSSpotkajmy się na DiscordziePoproś o pomoc, pokaż, nad czym pracujesz, i rozmawiaj o MU z innymi właścicielami serwerów.Otwórz

MuADMINS

Rozwiązania

Krótkie poprawki częstych problemów z serwerem, klientem i stroną MU Online, każda ze źródłem i datą. “Potwierdzone” oznacza, że osoba, która pytała, potwierdziła, że poprawka zadziałała.

Rozwiązania: 55 dla “odbc” · Wyczyść

  1. Konfiguracja serweraMuEmu / Louis97d

    Kayito MuEmu 0.97k download has no JoinServer and DataServer folders. Where are they?

    1. First choose your database engine: SQL Server or MySQL. 2. For SQL Server copy JoinServer and DataServer from the MSSQL folder; for MySQL take them from the MySQL folder. 3. Put both n...

    ✓ Potwierdzone w zgłoszeniuGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2025-06-22
  2. Konfiguracja serweraany

    I run one server on my VPS and want a second one with its own database on the same VPS, but it does not connect. What must change?

    1. Give the second server its own database and create a new ODBC data source pointing to it (same driver, Server = (local), Database = new name). 2. Point the second JoinServer and DataSe...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2019-10-09
  3. Konfiguracja serweraany

    After enabling TCP/IP in SQL Server for the web, DataServer, JoinServer and GameServerCS lost the database connection. How was it fixed?

    1. In SQL Server Configuration Manager keep Named Pipes and TCP/IP enabled for the instance. 2. Open the ODBC DSNs used by the server files. 3. Change the Server field from the LAN IP to...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2020-05-23
  4. Konfiguracja serweraMuEmu / LouisS6

    MuEmu S6 (KoshGames/Louis) on SQL Server Express 2012: JoinServer says "Could not connect to database" although MuOnline is restored and the .reg files were run.

    1. SQL Express installs a named instance, usually SQLEXPRESS, so (local) alone does not reach it. 2. Open the ODBC admin for your Windows bits and create the DSNs by hand. 3. In the serve...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2020-08-08
  5. Konfiguracja serweraInne plikiS2

    Season 2 files on SQL Server 2000: after creating the MuOnline database with the query, DataServer shows a database error. What was wrong?

    1. Run the database creation query in Query Analyzer logged in as sa, without selecting another database first. 2. Check the ODBC admin: the files' ODBC.reg had created the entries under...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2017-03-23
  6. Konfiguracja serweraWebZen 97d / 99b97d

    SQL 2000 will not install on Windows 7, so how do I run DarksTeam 97d files on SQL Server 2008 R2 instead?

    1. Install SQL Server 2008 R2 and set a password for sa during setup (do not skip it). 2. Restore the MuOnline database from the files. 3. Open the ODBC admin (32-bit one on 64-bit Window...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2018-08-06
  7. Konfiguracja serweraMuEmu / LouisS6

    MuEmu S6 DataServer and JoinServer show "Could not connect to database" on SQL 2008 R2 even after renaming MuOnlineS6 to MuOnline. What fixed it?

    1. In the DataServer and JoinServer config files make sure the database name is the one you restored (MuOnline, not MuOnlineS6). 2. Delete the old or duplicate MuOnline DSNs and create th...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2018-06-06
  8. Konfiguracja serweraMuEmu / LouisS4

    Louis S4 (TSM FirePremium) local server worked for one day, then shows SQL connection errors.

    1. Create the ODBC data sources by hand in the ODBC administrator (instead of the .reg file). 2. Point them to the right SQL server and database and restart the servers.

    ✓ Potwierdzone przez autora tematuTuServerMU · 2018-06-11
  9. Konfiguracja serweraMuEmu / LouisS6

    MuEmu S6 by Louis: DataServer and JoinServer say 'Could not connect to database' with both included databases, even with correct IPs and open ports.

    1. The included ODBC .reg created a data source named MuOnlineS6 pointing to database MuOnlineS6. 2. Edit the ODBC data source (or the .reg) so the name and database match what the server...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2017-10-10
  10. Konfiguracja serweraIGCNS9

    IGC DataServer stays on its loading window and never finishes starting.

    1. Check the ODBC/SQL settings of the DataServer. 2. The SQL instance name was wrong. When SQL Server is on the same PC use (local) as the instance/host. 3. Start the DataServer again.

    ✓ Potwierdzone przez autora tematuTuServerMU · 2017-04-21
  11. Strona WWWany

    MuCore on XAMPP on the same VPS as SQL Server cannot connect to the database.

    1. Easiest: in the MuCore config.php change the connection type from MSSQL to ODBC. 2. Or open SQL Server Configuration Manager, enable TCP/IP and Named Pipes, and restart SQL Server. 3....

    ✓ Potwierdzone przez autora tematuTuServerMU · 2017-12-27
  12. Strona WWWany

    WebEngine 1.0.9 with a remote SQL Server IP fails with 'Could not connect to database (1)', while MuCore connects to the same server without problems.

    1. In the WebEngine installer select the ODBC driver instead of dblib/sqlsrv. 2. Make sure the matching PHP ODBC extension is enabled and port 1433 is reachable. 3. Finish the install.

    ✓ Potwierdzone przez autora tematuRaGEZONE · 2017-09-09
  13. Klient gryWebZen 97d / 99b0.97

    Serial does not match the client and the main is encrypted, so HxD and main editors fail (0.97 + Retail2 files).

    1. Restore the MuOnline.bak shipped in C:\MuServer\DB. 2. Create the ODBC entry (64 bit). 3. Delete the CheckSum file in C:\MuServer\data\lang\kor. After this the client connected.

    ✓ Potwierdzone przez autora tematuTuServerMU · 2020-03-28
  14. Konfiguracja serweraMuEmu / LouisSeason 8 Episode 3

    JoinServer and DataServer stopped connecting to the database (MuEmu Season 8)

    Restoring the database and the ODBC data sources again did not help: the SQL login the servers use did not have the rights it needs. 1. Open SQL Server Management Studio and go to Securit...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2018-10-06
  15. Konfiguracja serwera

    JoinServer and DataServer cannot connect to the database although the backup is restored

    These files had the database name MuOnlineS6 in the server configs while the database was restored as MuOnline, so the servers looked for a database that does not exist. 1. In SQL Server...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2018-09-27
  16. NarzędziaWebZen 97d / 99b97d

    SkynetMU Full Option Cleaner: how do I find and remove full excellent items from warehouses and inventories of a 97/97D SQL database?

    1. Install Python 3.11 or 3.12 on Windows, then run py -m pip install -r requirements.txt and py SkynetMU_FullOption_Cleaner.py. 2. For ODBC install Microsoft ODBC Driver 17 or 18 for SQL...

    Opracowanie źródła przez MuADMINSNot verifiedGitHub (Azzlaer/Mu_Cleaner_OF) · 2026-08-24
  17. NarzędziaEx702 to S8E2

    MU DB Helper: how do I install the item, inventory and vault database editor for Ex702 and newer servers?

    1. Requirements: Visual Studio 2013, SQL Server 2012 or newer, ODBC Driver 13 and a MU Online Ex702+ database. 2. Clone the repository and make sure a MuOnline database exists (CREATE DAT...

    Opracowanie źródła przez MuADMINSNot verifiedGitHub (kyleruss/mu-db-helper) · 2018-04-30
  18. Narzędzia

    Guild Editor: "An Error was found in your CMTedit.ini !" when it starts

    1. Open CMTedit.ini next to the editor. 2. In [MuOnline] (and [MeMuOnline]) the DSN= value is the name of your ODBC data source, not the SQL Server name; it is generally MuOnline. Create...

    Opracowanie źródła przez MuADMINSNot verifiedRaGEZONE · 2020-05-30
  19. NarzędziaEX803

    IzsMuEditor 2.1.2 (EX803): the editor does not connect to the database

    1. By default IzsMuEditor connects through an ODBC DSN. 2. If it does not connect, open Data\IzsConfig.ini, set Use_ODBC to 0 and fill in your SQL connection data (server, user, password)...

    Opracowanie źródła przez MuADMINSNot verifiedRaGEZONE · 2016-11-19
  20. Konfiguracja serwera

    Event server (Devil Square ranking) error: it looks for the wrong database

    1. Open the event server config svconfig.ini. 2. Change mu2003_dsn = Ranking to mu2003_dsn = MuOnline (the data source that really exists). 3. Restart the event server.

    ✓ Potwierdzone przez autora tematuDarksTeam · 2009-10-08

MuADMINS Community Alpha: za darmo, tworzone przez społeczność, w aktywnym rozwoju.