Community AlphaAlpha MUADMINS
ITItaliano
Accedi
Su MuADMINSConfig ScannerCarica lo zip dei tuoi file: rates, drop, spot, limitiApriSu MuADMINSIncontraci su DiscordChiedi aiuto, condividi quello che stai creando e parla di MU con altri proprietari di server.Apri

MuADMINS

Soluzioni

Fix brevi per i problemi comuni di server, client e siti web di MU Online, ognuno con la sua fonte e la sua data. “Confermato” significa che chi ha fatto la domanda ha detto che il fix ha funzionato.

81 soluzioni per “data local” · Azzera

  1. Client di gioco

    Every MU client suddenly shows Portuguese text (reads Data/Local/Por instead of Eng) after trying another client

    1. The other client changed a registry value that every client reads. 2. Run regedit.exe and go to HKEY_CURRENT_USER\Software\Webzen\Mu\Config. 3. Change LangSelection to Eng: the clients...

    ✓ Confermato dall'autore della discussioneRaGEZONE · 2014-08-12
  2. Client di giocoMuEmu / LouisSeason 6 Episode 3

    Client BMD (Louis Update 13, S6E3): error for data/local/spn/MasterSkillTooltip_Spn.bmd when the client starts in Spanish

    1. The Spanish copy Data\Local\Spn\MasterSkillTooltip_spn.bmd is corrupt; the English one in Data\Local\Eng is fine. 2. Copy MasterSkillTooltip_eng.bmd from the Eng folder into the Spn fo...

    ✓ Confermato dall'autore della discussioneTUServerMU · 2020-02-16
  3. StrumentiWebZen 97d / 99bS2, S3

    Season 2 and 3 client: which editor opens which Data\Local file (MuTool 0.82, ExtreMuEdit, MUimgGUI, BmdDecoder, DGE Text Editor)

    1. MuTool 0.82: Dialog.bmd, filter.bmd, gate.bmd, item.bmd, item2.bmd, Movereq.bmd, skill.bmd and slide.bmd. 2. ExtreMuEdit: filtername.bmd, itemsettype.bmd and Monsterskill.bmd. 3. MUimg...

    Riscrittura della fonte da parte di MuADMINSNot verifiedDarksTeam · 2008-05-09
  4. Strumenti

    MFS Database Tool: the backup gives the same error as other backup managers, even with (local), Windows authentication or 127.0.0.1

    1. Connect to your SQL Server as usual (the tool supports SQL Server 2000 and 2008 style connections). 2. Do not pick the database with the drop down button: type the database name (for e...

    ✓ Confermato dall'autore della discussioneRaGEZONE · 2014-02-11
  5. Setup del serverIGCNS12

    IGCN Season 12: DataServer is not responding although TCP/IP is enabled in SQL Server

    1. Open DataServer.ini and check SQLServerName. 2. When SQL Server runs on the same machine use SQLServerName = (local) or the exact PC name as shown in SQL Server Management Studio (for...

    ✓ Confermato dall'autore della discussioneRaGEZONE · 2020-01-08
  6. Setup del serverIGCNS9

    IGC DataServer stays on its loading window and never finishes starting.

    1. Check the ODBC/SQL settings of the DataServer. 2. The SQL instance name was wrong. When SQL Server is on the same PC use (local) as the instance/host. 3. Start the DataServer again.

    ✓ Confermato dall'autore della discussioneTuServerMU · 2017-04-21
  7. Setup del serverIGCN

    IGCN License Manager: how to activate the server license again without changing the license data (Clear Activation)

    1. Check that you still have a license change available (the free allowance or a bought license change service). 2. On the License Manager page open the dropdown of that license and choos...

    Riscrittura della fonte da parte di MuADMINSNot verifiedIGCN · 2024-10-30
  8. Setup del serverany

    After enabling TCP/IP in SQL Server for the web, DataServer, JoinServer and GameServerCS lost the database connection. How was it fixed?

    1. In SQL Server Configuration Manager keep Named Pipes and TCP/IP enabled for the instance. 2. Open the ODBC DSNs used by the server files. 3. Change the Server field from the LAN IP to...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2020-05-23
  9. Strumenti

    MuMaker: how to fill the first configuration window (SQL user, local or remote, MD5, database names, reset column)

    1. Extract MuMaker and start MuMaker.exe. 2. Type any name (server name or yours), the SQL user (sa by default) and its password. 3. Connection type: choose local when MuMaker runs on the...

    Riscrittura della fonte da parte di MuADMINSNot verifiedRaGEZONE · 2007-12-22
  10. StrumentiS6

    BMDFIXER V5: what it fixes after editing a client BMD, and why it does not fix "[ResourceGuard] Error: Data/Local/filter.bmd file is modified."

    1. BMDFIXER recalculates the checksum stored inside an edited client .bmd so the main.exe check accepts it again. It was reversed and tested on GMO Season 6 ep2 and ep3 clients (eX700 sty...

    Riscrittura della fonte da parte di MuADMINSNot verifiedRaGEZONE · 2011-12-25
  11. Strumenti

    Titan Editor: cannot connect to the MU database to create accounts (single MuOnline database)

    1. Open the Titan Editor config. With only one database (MuOnline) both ODBC names point to it: [Connection] ODBC=MuOnline, ODBC_Me=MuOnline, User=sa, Password=yourpass, SQLServer=(local)...

    ✓ Confermato dall'autore della discussioneRaGEZONE · 2013-09-25
  12. Setup del serverany

    JoinServer and DataServer show Could not connect to database on start.

    1. Restore the MuOnline database correctly in SQL Server (from the backup shipped with your files). 2. Create the ODBC data source the servers expect, pointing to that database. 3. Make s...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2017-07-05
  13. Setup del serverAltri fileS2

    Season 2 files on SQL Server 2000: after creating the MuOnline database with the query, DataServer shows a database error. What was wrong?

    1. Run the database creation query in Query Analyzer logged in as sa, without selecting another database first. 2. Check the ODBC admin: the files' ODBC.reg had created the entries under...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2017-03-23
  14. Setup del serverMuEmu / LouisS6

    MuEmu S6 by Louis: DataServer and JoinServer say 'Could not connect to database' with both included databases, even with correct IPs and open ports.

    1. The included ODBC .reg created a data source named MuOnlineS6 pointing to database MuOnlineS6. 2. Edit the ODBC data source (or the .reg) so the name and database match what the server...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2017-10-10
  15. Client di giocoMuEmu / LouisS6

    Data\Local\Spn\MasterSkillTooltip_spn.bmd 'file corrupted' for only some players (MuEmu S6 client).

    The client data is English only, and players with Spanish selected load the Spn folder. 1. Set the language to English in the launcher config, or 2. copy the Eng files into the Spn folder...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2016-12-17
  16. Setup del serverSeason 8

    DataServer and JoinServer do not connect after running the ODBC file that came with the files

    The .reg or .bat ODBC file bundled with many server files does not always create the data source on your Windows. Create it by hand: 1. Open the ODBC Data Source Administrator (on 64-bit...

    ✓ Confermato dall'autore della discussioneTUServerMU · 2021-06-08
  17. Setup del server

    JoinServer and DataServer cannot connect to the database although the backup is restored

    These files had the database name MuOnlineS6 in the server configs while the database was restored as MuOnline, so the servers looked for a database that does not exist. 1. In SQL Server...

    ✓ Confermato dall'autore della discussioneTUServerMU · 2018-09-27
  18. Setup del server

    ODBC / DSN: the DataServer or JoinServer cannot connect to MuOnline (DSN name, 32 bit or 64 bit)

    MuEmu, Louis, MSPro, X-Team and MuDevs files connect through an ODBC System DSN: - JoinServer.ini JoinServerODBC = MuOnline, DataServer.ini DataServerODBC = MuOnline (MSPro: ODBC = MuOnli...

    Not verifiedScritto da MuADMINS
  19. Strumenti

    How to change the map name image that appears when entering a map (ImgMapNames)

    1. The map name images are in the client Data\Local\Eng\ImgMapNames\ folder, one file per map. 2. Convert the file of that map to a normal image with Pentium Tools. 3. Write the new text...

    ✓ Confermato dall'autore della discussioneRaGEZONE · 2018-05-18
  20. StrumentiS6E3

    Minimap BMD (S6E3): how to change, remove or add the location points shown on the map screen

    1. The points of each map are in the client Data\Local\Eng\Minimap\ folder, one .bmd per map. 2. Open it with Pentium Tools or MagicHand and change the text and coordinates of the existin...

    ✓ Confermato dall'autore della discussioneRaGEZONE · 2017-12-04
Non hai ancora risolto? Chiedi all'Assistente MU Cerca su MuGPS Cerca su MUTube

MuADMINS Community Alpha: gratuito, fatto dalla community, in sviluppo attivo.