MuADMINS
Solutions
Des correctifs courts pour les problèmes courants de serveur, de client et de site web MU Online, chacun avec sa source et sa date. “Confirmé” signifie que la personne qui a posé la question a indiqué que le correctif a fonctionné.
206 solutions pour “no connection to the server” · Effacer
MuEditor and MuEditorDeCuenta (account editor) cannot connect to SQL Server on the VPS, both show connection errors at start
1. Configure both editors with the IP of your VPS, the SQL user sa and its password. 2. Open the SQL Server port (1433 unless you changed it) in the Windows Firewall of the VPS. 3. In SQL...
✓ Confirmé par l'auteur du sujetCreandoMU · 2023-01-01MuCore install: "Connection with MuOnline Database Failed" and "Extension php_mssql.dll must be enabled"
1. MuCore needs a PHP that still has the old php_mssql.dll extension: in php.ini find extension=php_mssql.dll and remove the ; in front of it. 2. If your web server package has no php_mss...
✓ Confirmé par l'auteur du sujetRaGEZONE · 2011-03-05MuCore 1.08 installer: with the MSSQL connection it cannot get past step 3 (MSSQL 2008 R2, XAMPP 1.7.1)
1. Use XAMPP 1.7.7 for MuCore 1.08 (XAMPP 1.7.1 with MSSQL 2008 works badly). 2. Install the client DLL that supports your MSSQL version (linked in the reply). 3. Open C:/xampp/php/php.in...
✓ Confirmé par l'auteur du sujetRaGEZONE · 2016-05-26MuEditor 2.1 / MuMaker: 'SQL Connection failed' with a 97d+99i server, even when run as administrator
1. Running the editor as administrator did not help. 2. The editors connect through the ODBC data sources of the server (MuOnline, MuOnlineJoinDB and so on), so these must be registered c...
✓ Confirmé par l'auteur du sujetDarksTeam · 2016-05-07BeastMaker admin tool: how to set up the SQL connection and the allowed user (and SQL 2000 without "Edit Top 200 Rows")
1. Run the table script from the release post to create the BeastMaker table (columns BeastMaker_Allowed, BeastMaker_Logs) in the MuOnline database. 2. Add your allowed entry {"YOURNAME":...
MuMaker: "Login failed for user 'sa'. Reason: Not associated with a trusted SQL Server connection."
1. The error means SQL Server only accepts Windows logins, so the sa login that MuMaker uses is refused. 2. Change the SQL Server authentication to SQL Server and Windows Authentication m...
✓ Confirmé par l'auteur du sujetRaGEZONE · 2008-01-29Real MU Launcher (open source): "no connection to the server" and then it does not update the client
1. ServerURL must be a web address, not a folder on your PC: http://YOUR_WEB_IP_OR_DNS/path_to_update_folder/. A web server is needed (on a VPS or locally on your PC). 2. In Globals.cs se...
✓ Confirmé par l'auteur du sujetRaGEZONE · 2024-12-29WebEngine CMS installer: "Could not connect to database (1)" at the database step with MSSQL Server 2008 (PDO ODBC, XAMPP)
1. In this case the game files connected fine but the WebEngine installer kept failing on the database step, with no error in the SQL logs or the Windows event log. 2. The cause was a con...
✓ Confirmé par l'auteur du sujetRaGEZONE · 2023-10-06Launcher auto update (Titan Tech SCF ConnectServer) never downloads the patch from a hosting FTP account
1. The update FTP is set in the ConnectServer SCF_Config.ini, sections [FtpServerInfo] and [HttpServerInfo] (SCFAddress, SCFPort, SCFID, SCFPASS), with SCFClientVersion and SCFVersionFile...
✓ Confirmé par l'auteur du sujetRaGEZONE · 2015-02-23Main 5.2 (Louis) with MuServer Update 15: 'WriteValidation > ProtocolSend Connect [0] Read Header Fail:End of file' when the client connects
1. The asker fixed it (with help from son1xx2 on RaGEZONE) by building both the GameServer and the main without the new protocol system. 2. In the server source set #define NEW_PROTOCOL_S...
✓ Confirmé dans l'issueGitHub (LouisEmulator/Main5.2) · 2022-11-23Titan Editor: cannot connect to the MU database to create accounts (single MuOnline database)
1. Open the Titan Editor config. With only one database (MuOnline) both ODBC names point to it: [Connection] ODBC=MuOnline, ODBC_Me=MuOnline, User=sa, Password=yourpass, SQLServer=(local)...
✓ Confirmé par l'auteur du sujetRaGEZONE · 2013-09-25OpenMU: a player stays 'already connected' after a dropped connection and cannot log in again, even with the right password
1. The old session stays registered while the TCP connection to OpenMU is still open. With the web client the WebSocket proxy keeps that connection alive, so every new login gets AccountA...
✓ Confirmé dans l'issueGitHub (MUnique/OpenMU) · 2026-10-07MainInfo and Louis files on a local PC: the game cannot connect to 127.0.0.1 (nothing on 127.0.0.1 works on that PC)
1. Use the network IP of the PC (the LAN address) instead of 127.0.0.1. 2. Put that IP in MapServerInfo.dat, in the ConnectServer configuration and in MainInfo. 3. Common.dat can stay wit...
✓ Confirmé par l'auteur du sujetCreandoMU · 2021-03-26Two accounts always say they are already logged in, but they are not in game and cannot be disconnected.
1. The online state is kept by the JoinServer. 2. Use the JoinServer option to disconnect accounts. 3. Then the account can log in again.
✓ Confirmé par l'auteur du sujetCreandoMU · 2021-01-31GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)
The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...
✓ Confirmé par l'auteur du sujetDarksTeam · 2008-06-03Disconnect when entering my 97d+99i server after changing the main.exe settings with a Main Editor
For the 97d+99i files main.exe must not be edited. 1. Put back the original main.exe of the matching client. 2. Connect through the launcher set to your server address. 3. Log in again.
✓ Confirmé par l'auteur du sujetDarksTeam · 2008-07-04All servers start fine, but in game after pressing Connect it says "You are disconnected from the server"
The ConnectServer files still had a wrong IP. 1. Edit these files and put your local IP in each: D:\MuServer\CS\Connectserverlist, D:\MuServer\CS\Data\Connectserverlist, D:\MuServer\CS\Da...
✓ Confirmé par l'auteur du sujetDarksTeam · 2009-05-24"login server connect fail" when the server starts the GameServer
The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...
✓ Confirmé par l'auteur du sujetDarksTeam · 2009-11-04How to change the ConnectServer port 44405, and login fails after changing it
1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...
✓ Confirmé par l'auteur du sujetDarksTeam · 2010-12-21GameServer error at start with DarkMaster 97d+99i Beta 13 files, fixed by turning off the EventChip server connection
1. Open Data\commonserver.cfg. 2. Find EventChipServerConnect = 1 and change it to EventChipServerConnect = 0. 3. Restart the GameServer.
✓ Confirmé par l'auteur du sujetDarksTeam · 2011-04-23
Vidéos sur MUTube
Réduire drastiquement les déconnexions et le ping - Serveur Mu Global
Willian Gama · 10:37 · 2020
😭😭 Vous avez BEAUCOUP de DC sur Mu Online ? Réduisons le LAG, la LATENCE, le PING et les DC
SanTiago - MMORPG · 8:33 · 2025
SQL SERVER 2008 R2 - MUCore 1.0.8 - ODBC - MSSQL
Tự Chế Đồ Pro · 29:23 · 2013
[RÉVÉLÉ] POURQUOI VOUS PRENEZ UN DISCONNECT EN CRÉANT UN SERVEUR MU ONLINE 2022
Kiuzs · 12:58 · 2022