Community AlphaAlpha MUADMINS
ESEspañol
Iniciar sesión
En MuADMINSConfig ScannerSube el zip de tus archivos: rates, drops, spots, límitesAbrirEn MuADMINSEncuéntranos en DiscordPide ayuda, comparte lo que estás creando y habla de MU con otros dueños de servidores.Abrir

MuADMINS

Soluciones

Arreglos breves para problemas comunes de servidores, clientes y sitios web de MU Online, cada uno con su fuente y su fecha. “Confirmado” significa que la persona que preguntó dijo que el arreglo funcionó.

38 soluciones para “loginserver connect fail” · Limpiar

  1. Instalación del servidorS3E1 (1.04H)

    GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)

    The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...

    ✓ Confirmado por el autor del temaDarksTeam · 2008-06-03
  2. Instalación del servidor

    "login server connect fail" when the server starts the GameServer

    The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...

    ✓ Confirmado por el autor del temaDarksTeam · 2009-11-04
  3. Instalación del servidorIGCNS9

    IGCN S9 E2 repack: DataServer says 'Login failed for user ...' (SQLSTATE 28000) and 'DATA SERVER CANNOT CONNECT TO MSSQL'

    1. The repack DataServer config came with a SQL login that does not exist on your SQL Server (here a random name like D2a78Rtko0), so the login fails. 2. Open the database settings of the...

    ✓ Confirmado por el autor del temaRaGEZONE · 2019-07-14
  4. HerramientasWebZen 97d / 99b97d

    MuEditor 2.1 / MuMaker: 'SQL Connection failed' with a 97d+99i server, even when run as administrator

    1. Running the editor as administrator did not help. 2. The editors connect through the ODBC data sources of the server (MuOnline, MuOnlineJoinDB and so on), so these must be registered c...

    ✓ Confirmado por el autor del temaDarksTeam · 2016-05-07
  5. Instalación del servidorIGCN

    IGCN License Manager: what the GameServer license errors mean (Cannot connect to Auth Server, Time Check Failed, IP Address or HWID not found, Activation Time is over)

    1. Cannot connect to Auth Server (first connect) or Failed to connect to any of auth servers (reconnect): check that the subscription is active, that the IPs in the license data on the Li...

    Reescrito por MuADMINS a partir de la fuenteNot verifiedIGCN · 2022-03-28
  6. Cliente del juegoMuEmu / LouisS5.2

    Main 5.2 (Louis) with MuServer Update 15: 'WriteValidation > ProtocolSend Connect [0] Read Header Fail:End of file' when the client connects

    1. The asker fixed it (with help from son1xx2 on RaGEZONE) by building both the GameServer and the main without the new protocol system. 2. In the server source set #define NEW_PROTOCOL_S...

    ✓ Confirmado en el issueGitHub (LouisEmulator/Main5.2) · 2022-11-23
  7. Jugabilidad

    Players are disconnected inside Blood Castle; the GameServer log shows 'create monster fail - wrong map [173]'

    1. The Blood Castle monsters in the monster spawn XML were edited and some entries point to map code 173, which does not exist, so spawning them fails and players are dropped. 2. Revert e...

    ✓ Confirmado por el autor del temaRaGEZONE · 2024-02-14
  8. Cliente del juegoSeason 6

    "Connect Failed" when you start the client on the PC that runs the server (No-IP address)

    With a No-IP (dynamic DNS) name in the client, players outside can connect, but the PC that runs the server often cannot, because most home routers do not route your public address back i...

    ✓ Confirmado por el autor del temaTUServerMU · 2021-04-15
  9. Herramientas

    MuCore install: "Connection with MuOnline Database Failed" and "Extension php_mssql.dll must be enabled"

    1. MuCore needs a PHP that still has the old php_mssql.dll extension: in php.ini find extension=php_mssql.dll and remove the ; in front of it. 2. If your web server package has no php_mss...

    ✓ Confirmado por el autor del temaRaGEZONE · 2011-03-05
  10. Herramientas

    MuMaker: "Login failed for user 'sa'. Reason: Not associated with a trusted SQL Server connection."

    1. The error means SQL Server only accepts Windows logins, so the sa login that MuMaker uses is refused. 2. Change the SQL Server authentication to SQL Server and Windows Authentication m...

    ✓ Confirmado por el autor del temaRaGEZONE · 2008-01-29
  11. Instalación del servidor0.97d

    97d GameServer on a VPS says 'Failed to connect to SQL Server' although the SQL login, the MuOnline database and the IPs look correct

    The database and the SQL settings were fine; the IP passed to GameServer.exe in its shortcut was the problem. 1. Right-click the GameServer.exe shortcut you start the server with and open...

    ✓ Confirmado por el autor del temaTUServerMU · 2021-02-08
  12. Instalación del servidor

    How to change the ConnectServer port 44405, and login fails after changing it

    1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...

    ✓ Confirmado por el autor del temaDarksTeam · 2010-12-21
  13. Sitio webany

    MuCore 2.2.0 installer stops with 'SQL Failed' at the connection step.

    1. Open TCP port 1433 in the Windows firewall. 2. In SQL Server Configuration Manager enable Named Pipes and TCP/IP, set IPAll TCP Port 1433. 3. Restart SQL Server and run the installer a...

    ✓ Confirmado por el autor del temaTuServerMU · 2019-07-27
  14. HerramientasWebZen 97d / 99b1.02-1.03

    main.exe hex edit: how to change the serial and the connect IP of an old main (1.02 / 1.03 era) with a hex editor

    1. Open main.exe in a hex editor, press Ctrl+F, tick Find ASCII and search failed to connect: the 16 character serial is next to it. 2. Replace the serial with your own using exactly 16 c...

    Reescrito por MuADMINS a partir de la fuenteNot verifiedRaGEZONE · 2007-08-19
  15. Instalación del servidorMuEmu / LouisS6

    MuEmu S6 on a VPS: the client works inside the VPS, but from home it shows the antihack logo, says it could not connect and closes.

    1. When it works on the VPS itself but not from outside, the Windows Firewall of the VPS is the usual cause. 2. On the VPS, create inbound TCP allow rules for the ConnectServer port (4440...

    ✓ Confirmado por el autor del temaTuServerMU · 2018-11-18
  16. Sitio webany

    WebEngine 1.0.9 with a remote SQL Server IP fails with 'Could not connect to database (1)', while MuCore connects to the same server without problems.

    1. In the WebEngine installer select the ODBC driver instead of dblib/sqlsrv. 2. Make sure the matching PHP ODBC extension is enabled and port 1433 is reachable. 3. Finish the install.

    ✓ Confirmado por el autor del temaRaGEZONE · 2017-09-09
  17. HerramientasS6

    WebEngine CMS installer: "Could not connect to database (1)" at the database step with MSSQL Server 2008 (PDO ODBC, XAMPP)

    1. In this case the game files connected fine but the WebEngine installer kept failing on the database step, with no error in the SQL logs or the Windows event log. 2. The cause was a con...

    ✓ Confirmado por el autor del temaRaGEZONE · 2023-10-06
  18. Herramientas

    MuMaker: "Login failed for user 'sa'" although the server runs and the password is right (only one MuMaker build works)

    1. Check that the sa login has rights on the MU databases and that the password in the MuMaker Config.ini is right. 2. If it still says login failed, the MuMaker build does not fit your s...

    ✓ Confirmado por el autor del temaRaGEZONE · 2011-06-30
  19. Instalación del servidorIGCNS9

    IGCN S9 E2 repack: 'No active Game Servers found' and disconnect when the server settings use a DDNS hostname

    1. Put the real (numeric) IP address in the GameServer and server list settings instead of the DDNS hostname. 2. Restart the ConnectServer and GameServer and connect again. 3. If you must...

    ✓ Confirmado por el autor del temaRaGEZONE · 2018-12-29
  20. Sitio webany

    MuCore on a web host cannot connect to the MuOnline database on a Google Cloud VPS (Connection with MuOnline Database Failed), although 1433 is open in Windows.

    1. Enable TCP/IP and Named Pipes for the instance in SQL Server Configuration Manager and restart SQL. 2. Open TCP 1433 in the Windows firewall of the VPS. 3. Also open TCP 1433 in the cl...

    ✓ Confirmado por el autor del temaTuServerMU · 2019-03-17
¿Sigues atascado? Pregúntale al Asistente MU Buscar en MuGPS Buscar en MUTube

MuADMINS Community Alpha: gratis, hecho por la comunidad y en desarrollo activo.