Community AlphaAlpha MUADMINS
ENEnglish
Sign in
On MuADMINSConfig ScannerDrop your files zip: rates, drops, spots, limitsOpenOn MuADMINSMeet us on DiscordAsk for help, share what you are building and talk MU with other server owners.Open

MuADMINS

Solutions

Short fixes for common MU Online server, client and website problems, each with its source and date. “Confirmed” means the person who asked said the fix worked.

206 solutions for “disconnect” · Clear

  1. Server setupMuEmu / LouisS6

    MuEmu S6 (Louis): the client reaches the server selection, but when I pick the server it disconnects. What is missing?

    1. The ConnectServer port works, but the GameServer port (55901 by default) is blocked. 2. For a local test, add an inbound firewall rule for the GameServer port (or briefly turn off Wind...

    ✓ Confirmed by the topic starterTuServerMU · 2018-11-16
  2. Game clientMuEmu / LouisS6

    Testing a MuEmu S6 server on my home PC with the public IP set everywhere, the client says disconnected when entering. How do I fix it?

    1. For a test on the same PC or LAN, do not use the public IP: your router may not loop traffic back to itself. 2. Replace the public IP with the private IPv4 address of the server PC (se...

    ✓ Confirmed by the topic starterTuServerMU · 2018-10-28
  3. Server setupany

    Server on my home PC works for me with the IPv4 address, but friends get disconnected even with ports added to firewall and router. What is wrong?

    1. A private (LAN) address like 192.168.x.x only works inside your own network. 2. For outside players, put your public IP (or a No-IP hostname) in the server side IP settings (ConnectSer...

    ✓ Confirmed by the topic starterTuServerMU · 2019-05-03
  4. Server setupMuEmu / LouisS6

    MuEmu (compiled from source, antihack on): players are disconnected when moving to Crywolf and other GameServerCS maps, even with the CS port (55919) open.

    1. Open GameServer - Common of the GameServer(s). 2. Add the missing CustomerName and CustomerHardwareId lines (needed after compiling with the antihack enabled). 3. Restart GameServer an...

    ✓ Confirmed by the topic starterTuServerMU · 2019-01-02
  5. Server setupIGCNS15

    IGCN Season 15: at the 4th class quest phase 4, talking to the NPC to teleport freezes the game and then disconnects the player.

    1. Phase 4 runs on the instance server, whose port was not open. 2. Open the port of the instance GameServer in the Windows firewall (and router or VPS panel if used). 3. Start that serve...

    ✓ Confirmed by the topic starterTuServerMU · 2020-08-03
  6. Game client

    Only one remote player gets disconnected when selecting the server; the owner can play fine from far away (server on a VPS).

    The Enc and Dec key files in that player's client were different from the ones the server uses. Give every player the client with the same Enc/Dec files as the server.

    ✓ Confirmed by the topic starterTuServerMU · 2017-10-14
  7. Server setupMuDevsS16

    'You are disconnected from the server' at server select on an Amazon AWS VPS, even with all ports open in the Windows firewall (MuDevs S16 free files).

    Open the ports in the AWS console too: Security Groups > pick the right VPC/instance group > add inbound rules for the game ports. AWS blocks inbound traffic by default even when Windows...

    ✓ Confirmed by the topic starterTuServerMU · 2021-04-27
  8. Game clientMuEmu / LouisS6

    'You are disconnected from the server' when selecting the server, after the IP was changed in many config files (MuEmu files).

    1. Put your IP only in ConnectServer/ServerList.dat and GameServer Data/MapServerInfo.dat. 2. Leave every other IP entry at 127.0.0.1. 3. If you use the antihack, open its port 55999. 4....

    ✓ Confirmed by the topic starterTuServerMU · 2021-02-20
  9. Game clientMuEmu / LouisS6

    The server list shows, but selecting the server disconnects at once (Louis S6 Update 4 premium files with a premium client).

    1. Check the ports are open. 2. Check the IPs. 3. Make the client serial exactly the same as the serial in the files; the client serial was the missing part.

    ✓ Confirmed by the topic starterTuServerMU · 2018-11-10
  10. Server setupSeason 18 Episode 2

    Client disconnects right after choosing the server (server on a VPS)

    The server list shows, so the ConnectServer port is open, but the client is dropped when it moves on to the GameServer: the GameServer port is closed somewhere. 1. Find the GameServer por...

    ✓ Confirmed by the topic starterTUServerMU · 2023-09-16
  11. ToolsS6

    WebEngine CMS installer: "Could not connect to database (1)" at the database step with MSSQL Server 2008 (PDO ODBC, XAMPP)

    1. In this case the game files connected fine but the WebEngine installer kept failing on the database step, with no error in the SQL logs or the Windows event log. 2. The cause was a con...

    ✓ Confirmed by the topic starterRaGEZONE · 2023-10-06
  12. ToolsOther files

    Launcher auto update (Titan Tech SCF ConnectServer) never downloads the patch from a hosting FTP account

    1. The update FTP is set in the ConnectServer SCF_Config.ini, sections [FtpServerInfo] and [HttpServerInfo] (SCFAddress, SCFPort, SCFID, SCFPASS), with SCFClientVersion and SCFVersionFile...

    ✓ Confirmed by the topic starterRaGEZONE · 2015-02-23
  13. ToolsWebZen 97d / 99b97d

    MuEditor 2.1 / MuMaker: 'SQL Connection failed' with a 97d+99i server, even when run as administrator

    1. Running the editor as administrator did not help. 2. The editors connect through the ODBC data sources of the server (MuOnline, MuOnlineJoinDB and so on), so these must be registered c...

    ✓ Confirmed by the topic starterDarksTeam · 2016-05-07
  14. Game clientMuEmu / LouisS5.2

    Main 5.2 (Louis) with MuServer Update 15: 'WriteValidation > ProtocolSend Connect [0] Read Header Fail:End of file' when the client connects

    1. The asker fixed it (with help from son1xx2 on RaGEZONE) by building both the GameServer and the main without the new protocol system. 2. In the server source set #define NEW_PROTOCOL_S...

    ✓ Confirmed in the issueGitHub (LouisEmulator/Main5.2) · 2022-11-23
  15. Tools

    Titan Editor: cannot connect to the MU database to create accounts (single MuOnline database)

    1. Open the Titan Editor config. With only one database (MuOnline) both ODBC names point to it: [Connection] ODBC=MuOnline, ODBC_Me=MuOnline, User=sa, Password=yourpass, SQLServer=(local)...

    ✓ Confirmed by the topic starterRaGEZONE · 2013-09-25
  16. Server setupOpenMU

    OpenMU: a player stays 'already connected' after a dropped connection and cannot log in again, even with the right password

    1. The old session stays registered while the TCP connection to OpenMU is still open. With the web client the WebSocket proxy keeps that connection alive, so every new login gets AccountA...

    ✓ Confirmed in the issueGitHub (MUnique/OpenMU) · 2026-10-07
  17. ToolsMuEmu / Louis

    MainInfo and Louis files on a local PC: the game cannot connect to 127.0.0.1 (nothing on 127.0.0.1 works on that PC)

    1. Use the network IP of the PC (the LAN address) instead of 127.0.0.1. 2. Put that IP in MapServerInfo.dat, in the ConnectServer configuration and in MainInfo. 3. Common.dat can stay wit...

    ✓ Confirmed by the topic starterCreandoMU · 2021-03-26
  18. ToolsMuEmu / Louis

    MuEditor and MuEditorDeCuenta (account editor) cannot connect to SQL Server on the VPS, both show connection errors at start

    1. Configure both editors with the IP of your VPS, the SQL user sa and its password. 2. Open the SQL Server port (1433 unless you changed it) in the Windows Firewall of the VPS. 3. In SQL...

    ✓ Confirmed by the topic starterCreandoMU · 2023-01-01
  19. Server setupS3E1 (1.04H)

    GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)

    The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...

    ✓ Confirmed by the topic starterDarksTeam · 2008-06-03
  20. Server setup

    "login server connect fail" when the server starts the GameServer

    The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...

    ✓ Confirmed by the topic starterDarksTeam · 2009-11-04

MuADMINS Community Alpha: free and community made, in active development.