Community AlphaAlpha MUADMINS
PLPolski
Zaloguj się
Na MuADMINSConfig ScannerWgraj zip swoich plików: rates, dropy, spoty, limityOtwórzNa MuADMINSSpotkajmy się na DiscordziePoproś o pomoc, pokaż, nad czym pracujesz, i rozmawiaj o MU z innymi właścicielami serwerów.Otwórz

MuADMINS

Rozwiązania

Krótkie poprawki częstych problemów z serwerem, klientem i stroną MU Online, każda ze źródłem i datą. “Potwierdzone” oznacza, że osoba, która pytała, potwierdziła, że poprawka zadziałała.

Rozwiązania: 46 dla “m window” w kategorii Konfiguracja serwera · Wyczyść

  1. Konfiguracja serweraMuEmu / LouisS6

    MuEmu S6 on a VPS: the client works inside the VPS, but from home it shows the antihack logo, says it could not connect and closes.

    1. When it works on the VPS itself but not from outside, the Windows Firewall of the VPS is the usual cause. 2. On the VPS, create inbound TCP allow rules for the ConnectServer port (4440...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2018-11-18
  2. Konfiguracja serweraMuEmu / LouisS6

    MuEmu S6 (Louis): the client reaches the server selection, but when I pick the server it disconnects. What is missing?

    1. The ConnectServer port works, but the GameServer port (55901 by default) is blocked. 2. For a local test, add an inbound firewall rule for the GameServer port (or briefly turn off Wind...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2018-11-16
  3. Konfiguracja serweraMuEmu / LouisS6

    Friends can join my MuEmu S6 server from outside, but I cannot connect from another PC in the same LAN as the server. Which port is missing?

    1. It is usually not a port: many routers do not let LAN PCs reach their own public IP (no NAT loopback). 2. Use a No-IP hostname as the server address in the ConnectServer server list, m...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2020-07-14
  4. Konfiguracja serweraany

    During SQL Server setup the password for sa is rejected no matter what I type. Why?

    1. Setup enforces the Windows password policy on the sa password. 2. Use at least 8 characters that mix uppercase letters, lowercase letters and numbers (a symbol helps too). 3. Do not us...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2017-07-21
  5. Konfiguracja serweraMuEmu / LouisS6

    MuEmu S6 (KoshGames/Louis) on SQL Server Express 2012: JoinServer says "Could not connect to database" although MuOnline is restored and the .reg files were run.

    1. SQL Express installs a named instance, usually SQLEXPRESS, so (local) alone does not reach it. 2. Open the ODBC admin for your Windows bits and create the DSNs by hand. 3. In the serve...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2020-08-08
  6. Konfiguracja serweraInne plikiS2

    Season 2 files on SQL Server 2000: after creating the MuOnline database with the query, DataServer shows a database error. What was wrong?

    1. Run the database creation query in Query Analyzer logged in as sa, without selecting another database first. 2. Check the ODBC admin: the files' ODBC.reg had created the entries under...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2017-03-23
  7. Konfiguracja serweraany

    SQL Server 2012 installed without errors but SQL Server Agent will not start (Browser starts fine) when preparing MU files. What fixed it?

    1. In services.msc set SQL Server Agent to Automatic and try to start it. 2. If it still fails, the instance was installed with the wrong authentication choice. 3. Reinstall SQL Server an...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2018-11-19
  8. Konfiguracja serweraMuEmu / LouisS6

    MuEmu S6 DataServer and JoinServer show "Could not connect to database" on SQL 2008 R2 even after renaming MuOnlineS6 to MuOnline. What fixed it?

    1. In the DataServer and JoinServer config files make sure the database name is the one you restored (MuOnline, not MuOnlineS6). 2. Delete the old or duplicate MuOnline DSNs and create th...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2018-06-06
  9. Konfiguracja serweraMuEmu / LouisS6

    KoshGames S6.3 files (MuEmu base): any small edit to InvasionManager makes the GameServers fail as if the file were broken.

    1. Windows Notepad was corrupting the file when saving. 2. Edit the config with Notepad++ or Sublime Text, keeping the original encoding. 3. Save and restart the GameServers.

    ✓ Potwierdzone przez autora tematuTuServerMU · 2021-02-06
  10. Konfiguracja serweraIGCNS15

    IGCN Season 15: at the 4th class quest phase 4, talking to the NPC to teleport freezes the game and then disconnects the player.

    1. Phase 4 runs on the instance server, whose port was not open. 2. Open the port of the instance GameServer in the Windows firewall (and router or VPS panel if used). 3. Start that serve...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2020-08-03
  11. Konfiguracja serweraMuEmu / LouisS6

    MSVCP100.DLL is missing when starting ConnectServer, DataServer or JoinServer (MuEmu S6 files).

    Install the Microsoft Visual C++ 2010 Redistributable (x86, plus x64 on 64 bit Windows). Prefer the Microsoft download over single DLL sites.

    ✓ Potwierdzone przez autora tematuTuServerMU · 2018-06-11
  12. Konfiguracja serweraMuEmu / LouisS8

    The server works on the host PC, but other players cannot get in (MuEmu S8).

    1. Exclude main.exe from DEP and add the client folder to the antivirus exceptions. 2. Open the antihack port 55999 in the Windows firewall and in the router. 3. Allow ConnectServer and G...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2017-01-18
  13. Konfiguracja serweraSeason 8

    DataServer and JoinServer do not connect after running the ODBC file that came with the files

    The .reg or .bat ODBC file bundled with many server files does not always create the data source on your Windows. Create it by hand: 1. Open the ODBC Data Source Administrator (on 64-bit...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2021-06-08
  14. Konfiguracja serweraMuEmu / LouisSeason 6 (Louis update 24)

    ODBC test works but JoinServer and DataServer still do not connect (Louis files on a VPS)

    The topic starter fixed it by reinstalling SQL Server: it was installed wrong. The helper's diagnosis was a named instance (SQLEXPRESS) while the files expect the default instance. 1. Ope...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2021-04-26
  15. Konfiguracja serweraSeason 18 Episode 2

    Client disconnects right after choosing the server (server on a VPS)

    The server list shows, so the ConnectServer port is open, but the client is dropped when it moves on to the GameServer: the GameServer port is closed somewhere. 1. Find the GameServer por...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2023-09-16
  16. Konfiguracja serweraMSPro

    Restoring the MuOnline database fails in SQL Server 2022 (MSPro v17 files)

    1. In SQL Server Management Studio right click Databases > Restore Database, choose Device and pick the .bak file that came with the files. 2. Open the Options page. 3. Tick "Overwrite th...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2026-09-27
  17. Konfiguracja serweraMuEmu / LouisSeason 8 Episode 3

    JoinServer and DataServer stopped connecting to the database (MuEmu Season 8)

    Restoring the database and the ODBC data sources again did not help: the SQL login the servers use did not have the rights it needs. 1. Open SQL Server Management Studio and go to Securit...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2018-10-06
  18. Konfiguracja serwera

    JoinServer and DataServer cannot connect to the database although the backup is restored

    These files had the database name MuOnlineS6 in the server configs while the database was restored as MuOnline, so the servers looked for a database that does not exist. 1. In SQL Server...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2018-09-27
  19. Konfiguracja serwera

    ODBC / DSN: the DataServer or JoinServer cannot connect to MuOnline (DSN name, 32 bit or 64 bit)

    MuEmu, Louis, MSPro, X-Team and MuDevs files connect through an ODBC System DSN: - JoinServer.ini JoinServerODBC = MuOnline, DataServer.ini DataServerODBC = MuOnline (MSPro: ODBC = MuOnli...

    Not verifiedNapisane przez MuADMINS
  20. Konfiguracja serwera

    "Account does not exist" or the login fails although the account is in MEMB_INFO: what to check in the database

    Check these in order (all read only, nothing changes): 1. Is the server reading the same database? MuEmu, Louis, MSPro, X-Team, MuDevs use the ODBC DSN in JoinServer.ini (JoinServerODBC =...

    Not verifiedNapisane przez MuADMINS

MuADMINS Community Alpha: za darmo, tworzone przez społeczność, w aktywnym rozwoju.