Community AlphaAlpha MUADMINS
VITiếng Việt
Đăng nhập
Trên MuADMINSConfig ScannerTải lên zip file của bạn: rate, rơi đồ, spot, giới hạnMởTrên MuADMINSGặp chúng tôi trên DiscordNhờ giúp đỡ, chia sẻ những gì bạn đang làm và trò chuyện về MU với các chủ server khác.Mở

MuADMINS

Giải pháp

Các cách sửa ngắn gọn cho những lỗi thường gặp của server, client và website MU Online, mỗi cách đều kèm nguồn và ngày. “Đã xác nhận” nghĩa là người đặt câu hỏi cho biết cách sửa đã hiệu quả.

34 giải pháp cho “joinserver.ini” trong Cài đặt server · Xóa lọc

  1. Cài đặt server0.99.62T (1.0M)

    JoinServer shows an error at start with the DarksTeam 0.99.62T release files

    The JoinServer was started directly, without its start parameters. 1. Do not run joinserver.exe by itself; start it from StartUp.exe. 2. In StartUp.exe give the JoinServer the parameters...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2012-09-08
  2. Cài đặt serverany

    JoinServer and DataServer show Could not connect to database on start.

    1. Restore the MuOnline database correctly in SQL Server (from the backup shipped with your files). 2. Create the ODBC data source the servers expect, pointing to that database. 3. Make s...

    ✓ Được người mở chủ đề xác nhậnTuServerMU · 2017-07-05
  3. Cài đặt serverMuEmu / Louis97d

    Kayito MuEmu 0.97k download has no JoinServer and DataServer folders. Where are they?

    1. First choose your database engine: SQL Server or MySQL. 2. For SQL Server copy JoinServer and DataServer from the MSSQL folder; for MySQL take them from the MySQL folder. 3. Put both n...

    ✓ Đã xác nhận trong issueGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2025-06-22
  4. Cài đặt serverMuEmu / LouisS6

    MuEmu S6 (KoshGames/Louis) on SQL Server Express 2012: JoinServer says "Could not connect to database" although MuOnline is restored and the .reg files were run.

    1. SQL Express installs a named instance, usually SQLEXPRESS, so (local) alone does not reach it. 2. Open the ODBC admin for your Windows bits and create the DSNs by hand. 3. In the serve...

    ✓ Được người mở chủ đề xác nhậnTuServerMU · 2020-08-08
  5. Cài đặt serverMuEmu / LouisS6

    MuEmu S6 DataServer and JoinServer show "Could not connect to database" on SQL 2008 R2 even after renaming MuOnlineS6 to MuOnline. What fixed it?

    1. In the DataServer and JoinServer config files make sure the database name is the one you restored (MuOnline, not MuOnlineS6). 2. Delete the old or duplicate MuOnline DSNs and create th...

    ✓ Được người mở chủ đề xác nhậnTuServerMU · 2018-06-06
  6. Cài đặt serverWebZen 97d / 99bS6

    zTeam S6E3 (Exodus) files: JoinServer shows an error on start.

    1. Do not open JoinServer.exe directly. 2. Start it from a shortcut with parameters, for example /p55970 /ca127.0.0.1 /cp55557, or use the startup tool that comes with the files.

    ✓ Được người mở chủ đề xác nhậnTuServerMU · 2016-10-29
  7. Cài đặt serverSeason 8

    DataServer and JoinServer do not connect after running the ODBC file that came with the files

    The .reg or .bat ODBC file bundled with many server files does not always create the data source on your Windows. Create it by hand: 1. Open the ODBC Data Source Administrator (on 64-bit...

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2021-06-08
  8. Cài đặt serverMuEmu / LouisSeason 6 (Louis update 24)

    ODBC test works but JoinServer and DataServer still do not connect (Louis files on a VPS)

    The topic starter fixed it by reinstalling SQL Server: it was installed wrong. The helper's diagnosis was a named instance (SQLEXPRESS) while the files expect the default instance. 1. Ope...

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2021-04-26
  9. Cài đặt serverMuEmu / LouisSeason 8 Episode 3

    JoinServer and DataServer stopped connecting to the database (MuEmu Season 8)

    Restoring the database and the ODBC data sources again did not help: the SQL login the servers use did not have the rights it needs. 1. Open SQL Server Management Studio and go to Securit...

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2018-10-06
  10. Cài đặt server

    JoinServer and DataServer cannot connect to the database although the backup is restored

    These files had the database name MuOnlineS6 in the server configs while the database was restored as MuOnline, so the servers looked for a database that does not exist. 1. In SQL Server...

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2018-09-27
  11. Cài đặt serverS6, S16

    How do I turn MD5 on (MD5Encryption in JoinServer.ini) on MuEmu, Louis, MSPro, X-Team or MuDevs files, and what does the database need?

    In MuEmu based files the switch is JoinServer\JoinServer.ini, MD5Encryption = 0/1 (next to CaseSensitive = 0). Every pack we read ships 0. What the databases have: - X-Team Season 2 and 1...

    Not verifiedDo MuADMINS biên soạn
  12. Cài đặt serverMuEmu / LouisSeason 6 (Louis)

    JoinServer and DataServer show "[SocketManager] WSAAccept() failed with error: 10061" on start.

    1. Check DataServerAddress in common.dat. 2. Leave it at the default 127.0.0.1, it does not need your public IP. 3. Start the servers again.

    ✓ Được người mở chủ đề xác nhậnCreandoMU · 2022-02-21
  13. Cài đặt serverMuEmu / LouisS6

    MuEmu S6 by Louis: DataServer and JoinServer say 'Could not connect to database' with both included databases, even with correct IPs and open ports.

    1. The included ODBC .reg created a data source named MuOnlineS6 pointing to database MuOnlineS6. 2. Edit the ODBC data source (or the .reg) so the name and database match what the server...

    ✓ Được người mở chủ đề xác nhậnTuServerMU · 2017-10-10
  14. Cài đặt serverMuEmu / LouisSeason 6 (Louis)

    Two accounts always say they are already logged in, but they are not in game and cannot be disconnected.

    1. The online state is kept by the JoinServer. 2. Use the JoinServer option to disconnect accounts. 3. Then the account can log in again.

    ✓ Được người mở chủ đề xác nhậnCreandoMU · 2021-01-31
  15. Cài đặt serverS3E1 (1.04H)

    GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)

    The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2008-06-03
  16. Cài đặt server

    How to protect the server from attackers with the firewall

    Only the ConnectServer and GameServer must be reachable from outside. 1. In the firewall block outside access for: MySQL (mysqld.exe), the DataServer(s), ExDB, EventServer, RankingServer,...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2008-06-30
  17. Cài đặt server

    "login server connect fail" when the server starts the GameServer

    The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2009-11-04
  18. Cài đặt serverS3E1

    DarkMaster Season 3 Episode 1: every login says the account is invalid, although all IPs are changed

    The JoinServer password mode (MD5 or plain) did not match how the accounts were created. 1. Delete the test accounts. 2. Put the JoinServer build with MD5 enabled and create the account a...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2010-03-09
  19. Cài đặt serverMuEmu / LouisSeason 6

    MuEmu (Louis) files: where do I enter the SQL user and password? I cannot find it in any server config

    MuEmu servers do not keep the SQL login in their config files: JoinServer and DataServer reach the database through ODBC. 1. Run the ODBC .reg file that comes with the files, or create th...

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2020-07-12
  20. Cài đặt server

    Anyone can log in with a random account name and password, and the login creates that account in SQL

    1. This is not a database bug: the server has automatic account registration switched on, so an unknown login is created on the spot. 2. Open the JoinServer config (in some files the opti...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2021-04-15
Vẫn còn vướng mắc? Hỏi Trợ lý MU Tìm trên MuGPS Tìm trên MUTube

MuADMINS Community Alpha: miễn phí, do cộng đồng xây dựng, đang được phát triển tích cực.