Community AlphaAlpha MUADMINS
PLPolski
Zaloguj się
Na MuADMINSConfig ScannerWgraj zip swoich plików: rates, dropy, spoty, limityOtwórzNa MuADMINSSpotkajmy się na DiscordziePoproś o pomoc, pokaż, nad czym pracujesz, i rozmawiaj o MU z innymi właścicielami serwerów.Otwórz

MuADMINS

Rozwiązania

Krótkie poprawki częstych problemów z serwerem, klientem i stroną MU Online, każda ze źródłem i datą. “Potwierdzone” oznacza, że osoba, która pytała, potwierdziła, że poprawka zadziałała.

Rozwiązania: 206 dla “connect to server” · Wyczyść

  1. Narzędzia

    MuMaker 1.12: "No connection could be made because the target machine actively refused it, error 0" or "error 40" when connecting

    1. Open SQL Server Configuration Manager > SQL Server Network Configuration > Protocols for MSSQLSERVER. 2. Set TCP/IP to Enabled. 3. In TCP/IP Properties, IP Addresses tab: set Enabled t...

    ✓ Potwierdzone przez autora tematuRaGEZONE · 2017-08-08
  2. NarzędziaSeason 4

    Pentium Tools / text.bmd (Season 4 client without serverlist.bmd): how to change the words shown next to each server, for example slow and fast

    1. Searching and editing the words in text.bmd alone did not change the list for the asker. 2. Give the server the code 20 both in the ConnectServer server list and in the ServerInfo file...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2017-08-21
  3. Konfiguracja serweraOpenMUSeason 6 (1.04d client)

    OpenMU in Docker on an OpenWrt VM (VMware, bridged Wi-Fi): the client cannot connect and the log shows InvalidPacketHeaderException.

    1. That logged exception came from an HTTP client hitting the game server port, not from the MU client. 2. The real problem was packet forwarding of the bridged wireless network in VMware...

    ✓ Potwierdzone w zgłoszeniuGitHub (MUnique/OpenMU) · 2024-04-16
  4. Konfiguracja serweraclassic

    How do I show sub servers grouped under one server in the list?

    1. In Connectserverlist.dat the codes are 0, 1, 2... 2. Change them to 0, 21, 41, 61 (steps of 20). 3. The ConnectServer then reads them as rooms of the servers.

    ✓ Potwierdzone przez autora tematuImperyus Games Brasil · 2010-12-14
  5. Konfiguracja serweraMuEmu / LouisSeason 6 (Louis)

    How do I make a working online time ranking per character?

    1. Add an int column OnlineTime to the Character table (back up first). 2. Create a SQL Agent job every minute: UPDATE Character SET OnlineTime=OnlineTime+1 joined to MEMB_STAT (ConnectSt...

    ✓ Potwierdzone przez autora tematuCreandoMU · 2021-03-09
  6. Klient gry1.04D

    How to make a 1.04D main.exe connect to my server (version and serial)

    1. In the [GameServerInfo] section of the server config the client version is written as numbers: ClientExeVersion = 1.04.04 means 1.04D (the last number is the letter: 4 = D). 2. Put the...

    ✓ Potwierdzone przez autora tematuDarksTeam · 2008-05-16
  7. Konfiguracja serwera

    The website always shows 2 players online even when the server is off

    Stale rows in MEMB_STAT still say the accounts are connected. 1. Open Query Analyzer / SSMS on the MuOnline database. 2. Run UPDATE MEMB_STAT SET ConnectStat='0' WHERE ConnectStat>0. 3. R...

    ✓ Potwierdzone przez autora tematuDarksTeam · 2009-03-03
  8. Konfiguracja serwera

    After about one hour of uptime nobody can log in: the login just keeps loading

    1. Set the server startup tool to reload (restart) the ConnectServer at an interval; the answer says this is done on all versions. 2. Restart the servers.

    ✓ Potwierdzone przez autora tematuDarksTeam · 2009-04-29
  9. Strona WWW

    Website staff table: show whether each GM / Admin is online or offline

    1. Select the staff characters: Select CtlCode,AccountID From Character where CtlCode='32'. 2. For each one check MEMB_STAT: Select * from MEMB_STAT where memb___id='<AccountID>' and Conn...

    ✓ Potwierdzone przez autora tematuDarksTeam · 2010-05-14
  10. Konfiguracja serwera

    GameServer starts normally but crashes after a few minutes

    1. First read the GameServer logs: a broken event (Blood Castle, Devil Square) can stop the GS. 2. In this case the events and the GameServer were fine: the culprit was the ConnectServer....

    ✓ Potwierdzone przez autora tematuDarksTeam · 2011-05-11
  11. Konfiguracja serwera

    With the firewall turned on nobody can enter my server or my website; with it off they can

    The firewall blocks the server ports. 1. In the firewall allow (unblock) TCP 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Also allow port 80 for the website. 3....

    ✓ Potwierdzone przez autora tematuDarksTeam · 2012-07-14
  12. Konfiguracja serwera0.97d (97d+99i)

    GameServer 0.97 (DarksTeam 97d Beta 41) disconnects Dark Wizard / Soul Master with [ClientHack Detected : Editing AttackSpeed]

    The characters wear items that need more Strength or Agility than they have, so the attack speed check fires. 1. Either give the characters the stat points the items require, or 2. Open D...

    ✓ Potwierdzone przez autora tematuDarksTeam · 2018-12-29
  13. Strona WWW97d

    MuCore website Exchange System always shows 0 Online Hours although the character was online for hours (DarkMaster 97d server)

    The MuCore module reads the column OnlineMinutes, which did not exist in the database. 1. Take the online-time SQL script from the thread (it adds a column to MEMB_STAT and changes the st...

    ✓ Potwierdzone przez autora tematuDarksTeam · 2019-07-25
  14. NarzędziaMuEmu / Louisany

    MuEditor on the host PC cannot connect to the SQL Server that runs inside a local virtual machine

    1. In SQL Server Configuration Manager inside the VM enable TCP/IP (and Named Pipes), restart the SQL service and allow port 1433 in the VM firewall. 2. In the editor config fill both blo...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2019-11-24
  15. Strona WWW

    No MU website works on XAMPP (Windows 7 64-bit): SQL connection errors and php.ini extension errors although the extension is enabled

    1. Turn User Account Control (UAC) back on if you had disabled it. 2. Install XAMPP again (version 1.7.1, the one these old MSSQL based sites need). 3. Put the site back and test; the SQL...

    ✓ Potwierdzone przez autora tematuRaGEZONE · 2017-07-28
  16. Strona WWWS6

    MuCore install on a web host: after the serial number step, step_1 of the installer shows nothing (Season 6 repack)

    1. Open the MuCore configuration file that holds the database settings. 2. Find $core['connection_type'] = "MSSQL";. 3. Change the value to lower case: $core['connection_type'] = "mssql";...

    ✓ Potwierdzone przez autora tematuRaGEZONE · 2018-03-23
  17. Konfiguracja serweraMuEmu / Louis0.97k

    MuEmu 0.97k (kayito): how do I make a second server show up in its own box ("Server 2") on the server selection screen?

    1. The selection screen groups GameServers by ServerCode, 20 codes per box. 2. ServerCode 0 to 19 appear under Server 1, 20 to 39 under Server 2, 40 to 59 under Server 3, and so on. 3. Gi...

    ✓ Potwierdzone w zgłoszeniuGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2024-12-04
  18. Konfiguracja serweraOpenMUany

    OpenMU worked before, but after the PC ran for a while the game server cannot listen on 55901 or players cannot connect. Why?

    1. Ports 49152 to 65535 are the Windows dynamic range used for outgoing connections, so another process can already hold 55901 and up. 2. Newer OpenMU databases use 45901 to 45906 for gam...

    Opracowanie źródła przez MuADMINSNot verifiedGitHub (MUnique/OpenMU docs) · 2026-10-11
  19. Konfiguracja serweraany

    After enabling TCP/IP in SQL Server for the web, DataServer, JoinServer and GameServerCS lost the database connection. How was it fixed?

    1. In SQL Server Configuration Manager keep Named Pipes and TCP/IP enabled for the instance. 2. Open the ODBC DSNs used by the server files. 3. Change the Server field from the LAN IP to...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2020-05-23
  20. Strona WWWany

    WebEngine on shared hosting cannot reach SQL on my VPS. Port 1433 is open and MuMaker connects from home, but the web install still fails.

    1. The hosting company may block outgoing traffic to port 1433. 2. In SQL Server Configuration Manager > TCP/IP > IP Addresses > IPAll set TCP Port to another free port and leave TCP Dyna...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2020-05-23

MuADMINS Community Alpha: za darmo, tworzone przez społeczność, w aktywnym rozwoju.