Community AlphaAlpha MUADMINS
FILFilipino
Mag-sign in
Sa MuADMINSConfig ScannerI-upload ang zip ng mga file mo: rate, drop, spot, limitBuksanSa MuADMINSMakipagkita sa amin sa DiscordHumingi ng tulong, ibahagi ang ginagawa mo at makipag-usap tungkol sa MU sa ibang may-ari ng server.Buksan

MuADMINS

Mga Solusyon

Maiikling fix para sa mga karaniwang problema sa MU Online server, client at website, bawat isa ay may source at petsa. Ang ibig sabihin ng “Kinumpirma” ay sinabi ng nagtanong na gumana ang fix.

206 solusyon para sa “no connection to the server” · I-clear

  1. WebsiteSeason 6

    WebEngine on web hosting says "Could not connect to database (1)"

    Shared web hosting often blocks outgoing connections to port 1433, the default SQL Server port, so the website cannot reach the database on your VPS even when tools on your own PC can. 1....

    ✓ Kinumpirma ng nagsimula ng topicTUServerMU · 2021-02-07
  2. Server setupSeason 18 Episode 2

    Client disconnects right after choosing the server (server on a VPS)

    The server list shows, so the ConnectServer port is open, but the client is dropped when it moves on to the GameServer: the GameServer port is closed somewhere. 1. Find the GameServer por...

    ✓ Kinumpirma ng nagsimula ng topicTUServerMU · 2023-09-16
  3. Server setup

    JoinServer and DataServer cannot connect to the database although the backup is restored

    These files had the database name MuOnlineS6 in the server configs while the database was restored as MuOnline, so the servers looked for a database that does not exist. 1. In SQL Server...

    ✓ Kinumpirma ng nagsimula ng topicTUServerMU · 2018-09-27
  4. Game clientMuEmu / LouisSeason 4 (Louis update 25)

    Louis S4 update 25: entering Elbeland always disconnects.

    1. Original files do not do this, so check what you added. 2. Here an effect added to a custom item caused it. 3. Remove custom effects one by one to find the bad one.

    ✓ Kinumpirma ng nagsimula ng topicCreandoMU · 2021-05-18
  5. Server setup

    Players are disconnected from the game about one minute after entering

    The anti-hack options in the GameServer config kick legit players. 1. Open MuServer\Data\commonserver.cfg and find SpeedHackPlayerBlock. 2. Set the anti-hack block like the working values...

    ✓ Kinumpirma ng nagsimula ng topicDarksTeam · 2011-01-25
  6. Server setup0.96 / 0.97

    GameServer error "error-L3 : Monster Level Overflow" and players get disconnected (0.96/0.97 era files)

    A monster in the monster list has a level above the limit of the GameServer (149 or 254 depending on the files). 1. Open the monster list (Monster.txt) and look for monsters with a very h...

    ✓ Kinumpirma ng nagsimula ng topicDarksTeam · 2024-03-11
  7. Server setup0.97d

    97d GameServer on a VPS says 'Failed to connect to SQL Server' although the SQL login, the MuOnline database and the IPs look correct

    The database and the SQL settings were fine; the IP passed to GameServer.exe in its shortcut was the problem. 1. Right-click the GameServer.exe shortcut you start the server with and open...

    ✓ Kinumpirma ng nagsimula ng topicTUServerMU · 2021-02-08
  8. Gameplay

    Players are disconnected inside Blood Castle; the GameServer log shows 'create monster fail - wrong map [173]'

    1. The Blood Castle monsters in the monster spawn XML were edited and some entries point to map code 173, which does not exist, so spawning them fails and players are dropped. 2. Revert e...

    ✓ Kinumpirma ng nagsimula ng topicRaGEZONE · 2024-02-14
  9. Server setupIGCNS9

    IGCN Season 9: some players are disconnected right after character select and the client log shows ResourceGuard integrity errors

    1. The client log alone can mislead: also open the server side AntiHack log of the GameServer. Here it showed [AntiHack] ... Hit Hack detected for the players who were dropped. 2. In the...

    ✓ Kinumpirma ng nagsimula ng topicRaGEZONE · 2026-02-04
  10. Game client0.97d

    0.97d: maps added on the server (for example Chaos Castle) disconnect the player at the first hit and crash the GameServer

    1. The 0.97d main.exe does not know the new maps; it only handles the maps its code knows (there is no tool for that in this main). 2. The topic starter switched the client to a 0.97n mai...

    ✓ Kinumpirma ng nagsimula ng topicRaGEZONE · 2018-01-09
  11. Server setupIGCNS9

    IGCN S9 E2 repack: IGC tools do not run and the client disconnects with 127.0.0.1 in the configs

    1. Do not use 127.0.0.1 in the server IP settings of this repack. 2. Open CMD, run ipconfig and take your IPv4 address. 3. Put that IPv4 address in every server IP setting (and in the cli...

    ✓ Kinumpirma ng nagsimula ng topicRaGEZONE · 2019-06-11
  12. Server setupany

    ConnectServer and GameServer drop every few hours with WSASend error 10054 and protocol header errors once many players join.

    1. Check the real player limit of your files: these were built for 250 users, not 1000. 2. Above that number the server falls over. 3. Add a sub server (another GameServer) to spread play...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2021-05-30
  13. Game clientOpenMUany

    OpenMU: I start main.exe with the ClientLauncher pointing to 127.0.0.1:44405 and nothing happens, the server never sees a connection.

    1. The original client refuses 127.0.0.1. 2. Use another loopback address instead, usually 127.127.127.127, with port 44405. 3. Set it in the ClientLauncher (or in main.exe with a hex edi...

    ✓ Kinumpirma sa issueGitHub (MUnique/OpenMU) · 2019-02-15
  14. Game clientMuEmu / LouisS6

    Testing a MuEmu S6 server on my home PC with the public IP set everywhere, the client says disconnected when entering. How do I fix it?

    1. For a test on the same PC or LAN, do not use the public IP: your router may not loop traffic back to itself. 2. Replace the public IP with the private IPv4 address of the server PC (se...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2018-10-28
  15. Server setupMuEmu / LouisS6

    MuEmu (compiled from source, antihack on): players are disconnected when moving to Crywolf and other GameServerCS maps, even with the CS port (55919) open.

    1. Open GameServer - Common of the GameServer(s). 2. Add the missing CustomerName and CustomerHardwareId lines (needed after compiling with the antihack enabled). 3. Restart GameServer an...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2019-01-02
  16. Server setupMuEmu / LouisS6

    MuEmu S6 by Louis: DataServer and JoinServer say 'Could not connect to database' with both included databases, even with correct IPs and open ports.

    1. The included ODBC .reg created a data source named MuOnlineS6 pointing to database MuOnlineS6. 2. Edit the ODBC data source (or the .reg) so the name and database match what the server...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2017-10-10
  17. Server setupIGCNS15

    IGCN Season 15: at the 4th class quest phase 4, talking to the NPC to teleport freezes the game and then disconnects the player.

    1. Phase 4 runs on the instance server, whose port was not open. 2. Open the port of the instance GameServer in the Windows firewall (and router or VPS panel if used). 3. Start that serve...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2020-08-03
  18. Websiteany

    WebEngine 1.0.9 with a remote SQL Server IP fails with 'Could not connect to database (1)', while MuCore connects to the same server without problems.

    1. In the WebEngine installer select the ODBC driver instead of dblib/sqlsrv. 2. Make sure the matching PHP ODBC extension is enabled and port 1433 is reachable. 3. Finish the install.

    ✓ Kinumpirma ng nagsimula ng topicRaGEZONE · 2017-09-09
  19. Game client

    Only one remote player gets disconnected when selecting the server; the owner can play fine from far away (server on a VPS).

    The Enc and Dec key files in that player's client were different from the ones the server uses. Give every player the client with the same Enc/Dec files as the server.

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2017-10-14
  20. Server setupMuDevsS16

    'You are disconnected from the server' at server select on an Amazon AWS VPS, even with all ports open in the Windows firewall (MuDevs S16 free files).

    Open the ports in the AWS console too: Security Groups > pick the right VPC/instance group > add inbound rules for the game ports. AWS blocks inbound traffic by default even when Windows...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2021-04-27

MuADMINS Community Alpha: libre, gawa ng komunidad, at patuloy na dine-develop.