MuADMINS
Çözümler
Yaygın MU Online sunucu, client ve web sitesi sorunları için kısa düzeltmeler; her biri kaynağı ve tarihiyle. “Onaylanmış”, soruyu soran kişinin düzeltmenin işe yaradığını söylediği anlamına gelir.
733 çözüm “muemu s8” için · Temizle
JoinServer and DataServer show Could not connect to database on start.
1. Restore the MuOnline database correctly in SQL Server (from the backup shipped with your files). 2. Create the ODBC data source the servers expect, pointing to that database. 3. Make s...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2017-07-05ConnectServer and GameServer drop every few hours with WSASend error 10054 and protocol header errors once many players join.
1. Check the real player limit of your files: these were built for 250 users, not 1000. 2. Above that number the server falls over. 3. Add a sub server (another GameServer) to spread play...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2021-05-30Louis S6 Up13 GameServer window never opens, shows an error and fills the folder with .dmp files after editing configs.
1. Restore the original Data folder; if the server starts, the bad file is in there. 2. Put your edited files back one by one, starting with the ones you changed, until it fails again. 3....
✓ Konu sahibi tarafından onaylandıTuServerMU · 2021-10-11Kayito MuEmu 0.97k download has no JoinServer and DataServer folders. Where are they?
1. First choose your database engine: SQL Server or MySQL. 2. For SQL Server copy JoinServer and DataServer from the MSSQL folder; for MySQL take them from the MySQL folder. 3. Put both n...
✓ Sorun kaydında onaylandıGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2025-06-22The WebEngine downloads page does not list my client, patch and tool files. What is wrong?
1. This was a bug in older WebEngine builds where the download lists were not initialised as arrays. 2. Update to WebEngine 1.2.5 or newer, where the maintainer fixed it. 3. If a category...
✓ Sorun kaydında onaylandıGitHub (lautaroangelico/WebEngine) · 2023-10-09WebEngine player profile and character editor fail for names with [ ] tags like [ADM]Name. How to fix?
1. Older versions filter player names to letters and numbers, so names with brackets break the profile links. 2. Update to WebEngine 1.2.6 or newer: player and guild profile links are Bas...
✓ Sorun kaydında onaylandıGitHub (lautaroangelico/WebEngine) · 2022-08-17WebEngine shows a PDOException with my SQL Server host, user and password on screen when the database is down. How do I hide it?
1. The full stack trace is printed only because debug mode is turned on in your WebEngine configuration. 2. Turn debug mode off on the live site so visitors only see a generic error. 3. I...
✓ Sorun kaydında onaylandıGitHub (lautaroangelico/WebEngine) · 2017-08-10MuEmu 0.97k (kayito): how do I make a second server show up in its own box ("Server 2") on the server selection screen?
1. The selection screen groups GameServers by ServerCode, 20 codes per box. 2. ServerCode 0 to 19 appear under Server 1, 20 to 39 under Server 2, 40 to 59 under Server 3, and so on. 3. Gi...
✓ Sorun kaydında onaylandıGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2024-12-04Season 5 files: the client says to update the version (version error) and I cannot log in. What must match?
1. The client version and serial must be exactly the same as the Version and Serial in the GameServer configuration. 2. Compare them character by character: one wrong letter, digit or sym...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2019-08-01The client says "You are disconnected from the server" although the IPs, ah.info and main.info look correct. Where should I look?
1. Check that the basic ports are open: ConnectServer (44405) and GameServer (55901, 55919 for the CS server). 2. Open the client main.info settings again and check every value: IP, port...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2019-04-30MuEmu S6 on a VPS: the client works inside the VPS, but from home it shows the antihack logo, says it could not connect and closes.
1. When it works on the VPS itself but not from outside, the Windows Firewall of the VPS is the usual cause. 2. On the VPS, create inbound TCP allow rules for the ConnectServer port (4440...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2018-11-18MuEmu S6 (Louis): the client reaches the server selection, but when I pick the server it disconnects. What is missing?
1. The ConnectServer port works, but the GameServer port (55901 by default) is blocked. 2. For a local test, add an inbound firewall rule for the GameServer port (or briefly turn off Wind...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2018-11-16Two MuEmu S8 servers on one machine: the first works, the second disconnects at login although its ports (55902, 55920, 55961, 55971) are forwarded.
1. Open the router page and check that the forwarding rules for the second server ports are really enabled, not only created. 2. If a rule turns itself off again after a refresh, delete i...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2020-06-17I run one server on my VPS and want a second one with its own database on the same VPS, but it does not connect. What must change?
1. Give the second server its own database and create a new ODBC data source pointing to it (same driver, Server = (local), Database = new name). 2. Point the second JoinServer and DataSe...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2019-10-09Friends can join my MuEmu S6 server from outside, but I cannot connect from another PC in the same LAN as the server. Which port is missing?
1. It is usually not a port: many routers do not let LAN PCs reach their own public IP (no NAT loopback). 2. Use a No-IP hostname as the server address in the ConnectServer server list, m...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2020-07-14Testing a MuEmu S6 server on my home PC with the public IP set everywhere, the client says disconnected when entering. How do I fix it?
1. For a test on the same PC or LAN, do not use the public IP: your router may not loop traffic back to itself. 2. Replace the public IP with the private IPv4 address of the server PC (se...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2018-10-28Server on my home PC works for me with the IPv4 address, but friends get disconnected even with ports added to firewall and router. What is wrong?
1. A private (LAN) address like 192.168.x.x only works inside your own network. 2. For outside players, put your public IP (or a No-IP hostname) in the server side IP settings (ConnectSer...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2019-05-03After enabling TCP/IP in SQL Server for the web, DataServer, JoinServer and GameServerCS lost the database connection. How was it fixed?
1. In SQL Server Configuration Manager keep Named Pipes and TCP/IP enabled for the instance. 2. Open the ODBC DSNs used by the server files. 3. Change the Server field from the LAN IP to...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2020-05-23After moving from TitansTech to MuEmu, characters roll back on relog: items and position are not saved. The database was converted. What fixed it?
1. Character data is saved by the DataServer, so check that first, not the tables. 2. Do not reuse the DataServer from your old TitansTech files: it did not work with MuEmu. 3. Use the Da...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2017-11-02WebEngine on shared hosting cannot reach SQL on my VPS. Port 1433 is open and MuMaker connects from home, but the web install still fails.
1. The hosting company may block outgoing traffic to port 1433. 2. In SQL Server Configuration Manager > TCP/IP > IP Addresses > IPAll set TCP Port to another free port and leave TCP Dyna...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2020-05-23