MuADMINS
Solutions
Short fixes for common MU Online server, client and website problems, each with its source and date. “Confirmed” means the person who asked said the fix worked.
206 solutions for “no connection to the server” · Clear
Disconnect when entering my own server behind a router, although it worked before (after a Windows startup problem)
The PC got a different local IPv4 address, so the router's DMZ still pointed to the old one. 1. Open cmd and run ipconfig /all; note the IPv4 address. 2. In the router, set the DMZ (or th...
✓ Confirmed by the topic starterDarksTeam · 2012-04-30Client disconnects after choosing the server; the client log shows it connecting to someone else's IP (10.0.0.33, port 55901) with Pinkof Season 2 files
The server files and the client still pointed to the IP of the person who packed them. 1. Put your own IP in the ConnectServer server list config. 2. Put your own IP in the JoinServer con...
✓ Confirmed by the topic starterDarksTeam · 2015-02-13"error-L1 : CloseClient INVALID_SOCKET": after some time online the GameServer disconnects all players (97d+99i, after moving from Windows Server 2003 to Windows Server 2012 R2)
Reinstalling Windows, all updates and compatibility modes did not help; the fix was the newer DLL for the files. 1. Download the newer DLL that the developer uploaded for these 97d+99i fi...
✓ Confirmed by the topic starterDarksTeam · 2017-02-14Website error "Fatal error: Call to undefined function mssql_connect()" (XAMPP 1.7.7, SQL Server 2008, DarksWeb 0.3)
New XAMPP builds no longer have the mssql_* functions these old sites use. 1. Install XAMPP 1.7.1 (said to be the last one with mssql_*), or add code that defines those functions to the s...
✓ Confirmed by the topic starterDarksTeam · 2019-02-07WebEngine sidebar shows players online when nobody is connected
The online count comes from MEMB_STAT, and some accounts stayed marked as connected there. 1. With the game server closed, clear the stuck online flag in MEMB_STAT (for example: UPDATE ME...
✓ Confirmed by the topic starterTUServerMU · 2021-05-30Using a skill like Twisting Slash for a few seconds disconnects the player (Season 3.1 KOR files)
1. The disconnect comes from the GameServer antihack checks that treat fast repeated skill use as a hack. 2. Open commonserver.dat and disable the antihack settings (the topic starter dis...
✓ Confirmed by the topic starterRaGEZONE · 2018-03-31IGCN S9 E2 repack: 'No active Game Servers found' and disconnect when the server settings use a DDNS hostname
1. Put the real (numeric) IP address in the GameServer and server list settings instead of the DDNS hostname. 2. Restart the ConnectServer and GameServer and connect again. 3. If you must...
✓ Confirmed by the topic starterRaGEZONE · 2018-12-29Replacing WZ_DISCONNECT_MEMB for MuCore gives 'Msg 468 ... Cannot resolve the collation conflict between Latin1_General_CS_AS and SQL_Latin1_General_CP1_CI_AS'
1. The procedure compares memb___id from MEMB_INFO with memb___id from MEMB_STAT, and the two columns use different collations. 2. In SQL Server Management Studio set the same collation o...
✓ Confirmed by the topic starterRaGEZONE · 2015-11-30IGCN S9 E2 repack: DataServer says 'Login failed for user ...' (SQLSTATE 28000) and 'DATA SERVER CANNOT CONNECT TO MSSQL'
1. The repack DataServer config came with a SQL login that does not exist on your SQL Server (here a random name like D2a78Rtko0), so the login fails. 2. Open the database settings of the...
✓ Confirmed by the topic starterRaGEZONE · 2019-07-14Yomalex MuEmu (C#) with the Season 9 client: CSEmu lists the server but the client shows "You are disconnected from the server" a few seconds after start.
1. The Season 9 client used by this project is an IGCN client: rename the project Main.dll to IGC.dll and replace it in the client. 2. Do not use 127.0.0.1 as the server address: the clie...
✓ Confirmed in the issueGitHub (Yomalex/MuEmu) · 2023-06-28The client says "You are disconnected from the server" although the IPs, ah.info and main.info look correct. Where should I look?
1. Check that the basic ports are open: ConnectServer (44405) and GameServer (55901, 55919 for the CS server). 2. Open the client main.info settings again and check every value: IP, port...
✓ Confirmed by the topic starterTuServerMU · 2019-04-30MuEmu S6 on a VPS: the client works inside the VPS, but from home it shows the antihack logo, says it could not connect and closes.
1. When it works on the VPS itself but not from outside, the Windows Firewall of the VPS is the usual cause. 2. On the VPS, create inbound TCP allow rules for the ConnectServer port (4440...
✓ Confirmed by the topic starterTuServerMU · 2018-11-18MuEmu S6 (Louis): the client reaches the server selection, but when I pick the server it disconnects. What is missing?
1. The ConnectServer port works, but the GameServer port (55901 by default) is blocked. 2. For a local test, add an inbound firewall rule for the GameServer port (or briefly turn off Wind...
✓ Confirmed by the topic starterTuServerMU · 2018-11-16On a 0.99b server the ConnectServer closes by itself when I replace the numeric IP with a No-IP hostname. Why?
1. Old 0.99b ConnectServer builds only accept an address as long as a numeric IP. 2. Keep the hostname at 14 characters or less including the dots (the length of a full IPv4 address strin...
✓ Confirmed by the topic starterTuServerMU · 2021-02-10Server on my home PC works for me with the IPv4 address, but friends get disconnected even with ports added to firewall and router. What is wrong?
1. A private (LAN) address like 192.168.x.x only works inside your own network. 2. For outside players, put your public IP (or a No-IP hostname) in the server side IP settings (ConnectSer...
✓ Confirmed by the topic starterTuServerMU · 2019-05-03WebEngine CMS on a web host cannot reach the SQL Server on a VPS: 'Could not connect to database (1)', even after opening port 1433 in the firewall and enabling TCP/IP.
1. Check the usual items first: inbound rule for TCP 1433 in Windows Defender Firewall on the VPS, TCP/IP enabled in SQL Server Configuration Manager. 2. If it still fails, test whether t...
✓ Confirmed by the topic starterRaGEZONE · 2025-02-12WebEngine CMS install keeps saying 'Could not connect to database (1)' with SQL Server 2008 and XAMPP (PDO ODBC), even though SSMS connects fine.
1. The thread found a conflict between SQL Server 2008 and WebEngine's connection. 2. Install a newer SQL Server (2012 worked for the topic starter; another user had 2019 working). 3. Res...
✓ Confirmed by the topic starterRaGEZONE · 2023-10-06OpenMU in Docker on Windows: the client sees the server list but is disconnected when joining a server.
1. Use the client version the server targets (1.04d English, Season 6 E3). 2. Open the ports in the Windows firewall (and allow NAT edge traversal). 3. The connect server hands out the IP...
✓ Confirmed in the issueGitHub (MUnique/OpenMU) · 2019-11-12'You are disconnected from the server' when selecting the server, after the IP was changed in many config files (MuEmu files).
1. Put your IP only in ConnectServer/ServerList.dat and GameServer Data/MapServerInfo.dat. 2. Leave every other IP entry at 127.0.0.1. 3. If you use the antihack, open its port 55999. 4....
✓ Confirmed by the topic starterTuServerMU · 2021-02-20"Connect Failed" when you start the client on the PC that runs the server (No-IP address)
With a No-IP (dynamic DNS) name in the client, players outside can connect, but the PC that runs the server often cannot, because most home routers do not route your public address back i...
✓ Confirmed by the topic starterTUServerMU · 2021-04-15