Community AlphaAlpha MUADMINS
ENEnglish
Sign in
On MuADMINSConfig ScannerDrop your files zip: rates, drops, spots, limitsOpenOn MuADMINSMeet us on DiscordAsk for help, share what you are building and talk MU with other server owners.Open

MuADMINS

Solutions

Short fixes for common MU Online server, client and website problems, each with its source and date. “Confirmed” means the person who asked said the fix worked.

40 solutions for “connectserver port” · Clear

  1. Game clientMuEmu / Louisany

    The client says "You are disconnected from the server" although the IPs, ah.info and main.info look correct. Where should I look?

    1. Check that the basic ports are open: ConnectServer (44405) and GameServer (55901, 55919 for the CS server). 2. Open the client main.info settings again and check every value: IP, port...

    ✓ Confirmed by the topic starterTuServerMU · 2019-04-30
  2. Server setupMuEmu / LouisS6

    MuEmu S6 on a VPS: the client works inside the VPS, but from home it shows the antihack logo, says it could not connect and closes.

    1. When it works on the VPS itself but not from outside, the Windows Firewall of the VPS is the usual cause. 2. On the VPS, create inbound TCP allow rules for the ConnectServer port (4440...

    ✓ Confirmed by the topic starterTuServerMU · 2018-11-18
  3. Server setupMuEmu / LouisS6

    MuEmu S6 (Louis): the client reaches the server selection, but when I pick the server it disconnects. What is missing?

    1. The ConnectServer port works, but the GameServer port (55901 by default) is blocked. 2. For a local test, add an inbound firewall rule for the GameServer port (or briefly turn off Wind...

    ✓ Confirmed by the topic starterTuServerMU · 2018-11-16
  4. Server setupany

    I run one server on my VPS and want a second one with its own database on the same VPS, but it does not connect. What must change?

    1. Give the second server its own database and create a new ODBC data source pointing to it (same driver, Server = (local), Database = new name). 2. Point the second JoinServer and DataSe...

    ✓ Confirmed by the topic starterTuServerMU · 2019-10-09
  5. Server setupMuEmu / LouisS8

    The server works on the host PC, but other players cannot get in (MuEmu S8).

    1. Exclude main.exe from DEP and add the client folder to the antivirus exceptions. 2. Open the antihack port 55999 in the Windows firewall and in the router. 3. Allow ConnectServer and G...

    ✓ Confirmed by the topic starterTuServerMU · 2017-01-18
  6. Tools

    Mu Online Launcher (enemY, C#): how to set it up for old clients such as 97d and for Season 1 or newer clients

    1. Requirements: Windows 7 to 10 and .NET Framework 4.0 or newer. When the launcher does not start, the author's first check is the .NET Framework version and which MU version you test it...

    MuADMINS rewrite of the sourceNot verifiedDarksTeam · 2019-10-18
  7. Server setupOpenMUany

    OpenMU worked before, but after the PC ran for a while the game server cannot listen on 55901 or players cannot connect. Why?

    1. Ports 49152 to 65535 are the Windows dynamic range used for outgoing connections, so another process can already hold 55901 and up. 2. Newer OpenMU databases use 45901 to 45906 for gam...

    MuADMINS rewrite of the sourceNot verifiedGitHub (MUnique/OpenMU docs) · 2026-10-11
  8. Game clientOpenMUany

    OpenMU: I start main.exe with the ClientLauncher pointing to 127.0.0.1:44405 and nothing happens, the server never sees a connection.

    1. The original client refuses 127.0.0.1. 2. Use another loopback address instead, usually 127.127.127.127, with port 44405. 3. Set it in the ClientLauncher (or in main.exe with a hex edi...

    ✓ Confirmed in the issueGitHub (MUnique/OpenMU) · 2019-02-15
  9. Server setupOpenMUS6

    OpenMU in Docker on Windows: the client sees the server list but is disconnected when joining a server.

    1. Use the client version the server targets (1.04d English, Season 6 E3). 2. Open the ports in the Windows firewall (and allow NAT edge traversal). 3. The connect server hands out the IP...

    ✓ Confirmed in the issueGitHub (MUnique/OpenMU) · 2019-11-12
  10. Game clientMuEmu / LouisS6

    'You are disconnected from the server' when selecting the server, after the IP was changed in many config files (MuEmu files).

    1. Put your IP only in ConnectServer/ServerList.dat and GameServer Data/MapServerInfo.dat. 2. Leave every other IP entry at 127.0.0.1. 3. If you use the antihack, open its port 55999. 4....

    ✓ Confirmed by the topic starterTuServerMU · 2021-02-20
  11. Game clientMuEmu / LouisS6

    The server list shows, but selecting the server disconnects at once (Louis S6 Update 4 premium files with a premium client).

    1. Check the ports are open. 2. Check the IPs. 3. Make the client serial exactly the same as the serial in the files; the client serial was the missing part.

    ✓ Confirmed by the topic starterTuServerMU · 2018-11-10
  12. Game clientOpenMU

    OpenMU: the client cannot connect when the server and the client run on the same PC

    The original client blocks the address 127.0.0.1. OpenMU documentation: use any 127.x.x.x address except 127.0.0.1. 1. Start OpenMU and check in the admin panel (port 80) that the connect...

    MuADMINS rewrite of the sourceNot verifiedOpenMU on GitHub
  13. ToolsOther filesS8E2

    zFileManager 1.0.2.0: which zTeam Season 8 client files it converts to txt or xml and edits

    1. zFileManager (beta, by LockMU) supports the zTeam Season 8 Episode 2 files and converts client files to .txt or .xml in the zTeam format, with a built in editor and fast find and repla...

    MuADMINS rewrite of the sourceNot verifiedDarksTeam · 2014-10-31
  14. Tools

    MagicHand 2.0 BETA: how to run it and convert client BMD files for the server (archivos/txt folder)

    1. MagicHand is a web editor written in PHP5, not a desktop program: install AppServ or XAMPP and open it in any browser except Internet Explorer. 2. It edits the client BMD files (from B...

    MuADMINS rewrite of the sourceNot verifiedImperyus Games Brasil · 2010-08-14
  15. ToolsMuEmu / LouisSeason 6 / Season 8

    BMD DEC TOOLS (Louis, 2023): which files the new options open, and the skill.bmd problem

    1. Louis added options for: ItemSetOption with 256 entries (Season 6), ArcaBattleScript.bmd (Season 8+), ItemTRS.bmd (Season 8+), ItemTooltip_text.bmd with 1024 lines (Season 6), ServerLi...

    MuADMINS rewrite of the sourceNot verifiedTUServerMU · 2023-10-18
  16. Tools

    MagicHand client editor: I put it in XAMPP but the page shows nothing useful, how do I run it?

    1. MagicHand (MuEditorMagichand) is a free PHP client editor by the developer "magichand", posted on RaGEZONE in 2009. It runs from a local web server, not as an .exe. 2. Copy the editor...

    ✓ Confirmed by the topic starterRaGEZONE · 2009-12-14
  17. ToolsOpenMU

    OpenMU admin panel: on a fresh install the client cannot reach the server selection. How do I start the listeners and add a game server?

    1. Open Servers (/servers). A fresh install does not start its listeners: start both connect servers and at least one game server. 2. To start them automatically, enable *Auto Start* in t...

    MuADMINS rewrite of the sourceNot verifiedGitHub (MUnique/OpenMU) · 2026-10-17
  18. Tools

    HashCalculator (DaoVanTrong): how to make the auto update file list (List.inf for Webzen mu.exe, or CRC32 / MD5 / SHA1 lists)

    1. Drag the client folder (or your update folder, or any folder) onto the HashCalculator program icon: it calculates the codes at once and writes the report files. If you drag nothing, it...

    MuADMINS rewrite of the sourceNot verifiedRaGEZONE · 2018-04-21
  19. ToolsS16

    MuClientTools16: how do I open Season 16 client files (Lang.mpr, data BMDs, OZJ/OZT textures, BMD models, map files)?

    1. The tools target the Season 16 part 1.1 client (Lgd_Test 1.19.46); files of older or newer versions might or might not work. 2. Data files: the tools decode and encode the 45 data BMDs...

    MuADMINS rewrite of the sourceNot verifiedGitHub (VDraven/MuClientTools16) · 2022-07-08
  20. Tools

    MagicHand (Magic Hand Editor 1.0.5): how to run it and which client files it edits and converts

    1. MagicHand is a PHP editor: it runs on a local web server (AppServ, XAMPP or similar), not as a normal Windows program. 2. Copy the editor into the web root, for example C:\xampp\htdocs...

    MuADMINS rewrite of the sourceNot verifiedDarksTeam · 2010-10-07

MuADMINS Community Alpha: free and community made, in active development.