Community AlphaAlpha MUADMINS
VITiếng Việt
Đăng nhập
Trên MuADMINSConfig ScannerTải lên zip file của bạn: rate, rơi đồ, spot, giới hạnMởTrên MuADMINSGặp chúng tôi trên DiscordNhờ giúp đỡ, chia sẻ những gì bạn đang làm và trò chuyện về MU với các chủ server khác.Mở

MuADMINS

Giải pháp

Các cách sửa ngắn gọn cho những lỗi thường gặp của server, client và website MU Online, mỗi cách đều kèm nguồn và ngày. “Đã xác nhận” nghĩa là người đặt câu hỏi cho biết cách sửa đã hiệu quả.

21 giải pháp cho “port 1433” · Xóa lọc

  1. Websiteany

    WebEngine on shared hosting cannot reach SQL on my VPS. Port 1433 is open and MuMaker connects from home, but the web install still fails.

    1. The hosting company may block outgoing traffic to port 1433. 2. In SQL Server Configuration Manager > TCP/IP > IP Addresses > IPAll set TCP Port to another free port and leave TCP Dyna...

    ✓ Được người mở chủ đề xác nhậnTuServerMU · 2020-05-23
  2. Websiteany

    WebEngine CMS on a web host cannot reach the SQL Server on a VPS: 'Could not connect to database (1)', even after opening port 1433 in the firewall and enabling TCP/IP.

    1. Check the usual items first: inbound rule for TCP 1433 in Windows Defender Firewall on the VPS, TCP/IP enabled in SQL Server Configuration Manager. 2. If it still fails, test whether t...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2025-02-12
  3. Cài đặt serverany

    Remote tools or the web cannot reach a SQL Express or named instance on port 1433. How do I make SQL listen on a fixed port?

    1. Named instances use dynamic ports by default; only the default instance uses 1433. 2. SQL Server Configuration Manager > SQL Server Network Configuration > Protocols for your instance...

    MuADMINS viết lại từ nguồnNot verifiedMicrosoft Learn · 2025-08-26
  4. Websiteany

    MuCore on a web host cannot connect to the MuOnline database on a Google Cloud VPS (Connection with MuOnline Database Failed), although 1433 is open in Windows.

    1. Enable TCP/IP and Named Pipes for the instance in SQL Server Configuration Manager and restart SQL. 2. Open TCP 1433 in the Windows firewall of the VPS. 3. Also open TCP 1433 in the cl...

    ✓ Được người mở chủ đề xác nhậnTuServerMU · 2019-03-17
  5. Công cụ

    MuMaker 1.12: "No connection could be made because the target machine actively refused it, error 0" or "error 40" when connecting

    1. Open SQL Server Configuration Manager > SQL Server Network Configuration > Protocols for MSSQLSERVER. 2. Set TCP/IP to Enabled. 3. In TCP/IP Properties, IP Addresses tab: set Enabled t...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2017-08-08
  6. Công cụ

    MuMaker 1.13: "Format of the initialization string does not conform to specification starting at index 30" when connecting to SQL

    1. Check that SQL Server has TCP/IP enabled on port 1433 and that port 1433 is allowed in the Windows firewall; check the ODBC source and the MuMaker config. 2. Make sure .NET Framework 3...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2025-04-30
  7. Công cụMuEmu / Louis

    MuEmu Editor (2017) + Fixs: an error shows at start although Config.ini has localhost, port 1433, sa and the password

    1. Open the editor Config.ini. 2. In the [Me_MuOnline] and [MuOnline] blocks change EnableTrusted = 0 to EnableTrusted = 1. 3. Save and start the editor again: it connects.

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2017-04-29
  8. Cài đặt serverMuEmu / LouisSeason 6 (Louis update 15)

    MuEditor cannot connect to SQL Server (Louis S6 update 15).

    1. Follow the Louis setup video for SQL and ODBC. 2. The missing part was opening the SQL port (1433 by default) in the firewall. 3. Open it and connect again.

    ✓ Được người mở chủ đề xác nhậnCreandoMU · 2020-08-14
  9. WebsiteSeason 6

    WebEngine on web hosting says "Could not connect to database (1)"

    Shared web hosting often blocks outgoing connections to port 1433, the default SQL Server port, so the website cannot reach the database on your VPS even when tools on your own PC can. 1....

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2021-02-07
  10. Công cụ

    MuMaker: cannot connect to SQL Server 2005 Express (SQLEXPRESS)

    1. Open SQL Server Configuration Manager, then Protocols for SQLEXPRESS. 2. Right click TCP/IP, Properties, set Enabled to Yes. 3. In the IP Addresses tab set Active and Enabled to Yes fo...

    MuADMINS viết lại từ nguồnNot verifiedRaGEZONE · 2013-10-09
  11. Công cụMuEmu / Louisany

    MuEditor on the host PC cannot connect to the SQL Server that runs inside a local virtual machine

    1. In SQL Server Configuration Manager inside the VM enable TCP/IP (and Named Pipes), restart the SQL service and allow port 1433 in the VM firewall. 2. In the editor config fill both blo...

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2019-11-24
  12. Websiteany

    MuCore 2.2.0 installer stops with 'SQL Failed' at the connection step.

    1. Open TCP port 1433 in the Windows firewall. 2. In SQL Server Configuration Manager enable Named Pipes and TCP/IP, set IPAll TCP Port 1433. 3. Restart SQL Server and run the installer a...

    ✓ Được người mở chủ đề xác nhậnTuServerMU · 2019-07-27
  13. Công cụIGCNS9

    IGCN Essential Tools (S9 E2 repack) shows an error pop-up as soon as it is opened.

    1. Open SQL Server Configuration Manager > SQL Server Network Configuration > Protocols. 2. Enable Named Pipes and TCP/IP. 3. In TCP/IP properties > IP Addresses set TCP Port 1433 (IPAll)...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2018-06-18
  14. Công cụEX803

    IzsMuEditor 2.1.2 (EX803): the editor does not connect to the database

    1. By default IzsMuEditor connects through an ODBC DSN. 2. If it does not connect, open Data\IzsConfig.ini, set Use_ODBC to 0 and fill in your SQL connection data (server, user, password)...

    MuADMINS viết lại từ nguồnNot verifiedRaGEZONE · 2016-11-19
  15. Công cụ

    MuMaker: how to fill the first configuration window (SQL user, local or remote, MD5, database names, reset column)

    1. Extract MuMaker and start MuMaker.exe. 2. Type any name (server name or yours), the SQL user (sa by default) and its password. 3. Connection type: choose local when MuMaker runs on the...

    MuADMINS viết lại từ nguồnNot verifiedRaGEZONE · 2007-12-22
  16. Công cụMuEmu / Louis

    MuEditor and MuEditorDeCuenta (account editor) cannot connect to SQL Server on the VPS, both show connection errors at start

    1. Configure both editors with the IP of your VPS, the SQL user sa and its password. 2. Open the SQL Server port (1433 unless you changed it) in the Windows Firewall of the VPS. 3. In SQL...

    ✓ Được người mở chủ đề xác nhậnCreandoMU · 2023-01-01
  17. Công cụWebZen 97d / 99b97d-99

    MuEditor 2.1 (SkyTeam): how to set it up on another PC to edit the server database remotely (ODBC and DNS.ini)

    1. On the PC where you run MuEditor open Control Panel, Administrative Tools, Data Sources (ODBC). 2. In System DSN click Add, choose SQL Server: Name MuOnline, Description MuEditor, Serv...

    MuADMINS viết lại từ nguồnNot verifiedRaGEZONE · 2005-07-17
  18. Công cụMuEmu / Louis

    MuEmu Editor: an error appears when searching an account and inventory changes are not saved ('los cambios no han sido guardados')

    1. Open the editor Config.ini and check the database names in both blocks: ME_DB under [Me_MuOnline] and MU_DB under [MuOnline]. 2. They must match the real name of your database in SQL S...

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2018-06-04
  19. Websiteany

    WebEngine 1.0.9 with a remote SQL Server IP fails with 'Could not connect to database (1)', while MuCore connects to the same server without problems.

    1. In the WebEngine installer select the ODBC driver instead of dblib/sqlsrv. 2. Make sure the matching PHP ODBC extension is enabled and port 1433 is reachable. 3. Finish the install.

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2017-09-09
  20. Công cụIGCNS9, S12

    IGC.EssentialTools opens and closes by itself after about 3 seconds, even with the SQL user, password and server filled in.

    1. In the EssentialTools config set IP = (local) when SQL Server is on the same PC (it does not accept DNS names). 2. Port = 1433. 3. SQLInstance empty when there is a single SQL instance...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2020-05-17
Vẫn còn vướng mắc? Hỏi Trợ lý MU Tìm trên MuGPS Tìm trên MUTube

MuADMINS Community Alpha: miễn phí, do cộng đồng xây dựng, đang được phát triển tích cực.