Community AlphaAlpha MUADMINS
VITiếng Việt
Đăng nhập
Trên MuADMINSConfig ScannerTải lên zip file của bạn: rate, rơi đồ, spot, giới hạnMởTrên MuADMINSGặp chúng tôi trên DiscordNhờ giúp đỡ, chia sẻ những gì bạn đang làm và trò chuyện về MU với các chủ server khác.Mở

MuADMINS

Giải pháp

Các cách sửa ngắn gọn cho những lỗi thường gặp của server, client và website MU Online, mỗi cách đều kèm nguồn và ngày. “Đã xác nhận” nghĩa là người đặt câu hỏi cho biết cách sửa đã hiệu quả.

223 giải pháp cho “main” · Xóa lọc

  1. Công cụWebZen 97d / 99bS3

    main.exe 1.03K: the cash shop window text looks broken on Windows XP SP3 (fine on Vista and 7)

    1. Open main.exe (1.03K) in OllyDbg and go to offset 0079CFF4. 2. There you see MOV DWORD PTR SS:[EBP-1F0],1F4: change it to MOV DWORD PTR SS:[EBP-1F0],190. 3. Copy the change to the exec...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2011-09-17
  2. Công cụMuEmu / LouisS6

    MainInfo: how to enable the zoom (3D) camera in a Season 6 client

    1. Add camera.dll to the MAIN_INFO settings of your files. 2. Recreate the main with the MainInfo tool and copy the new files to the client: the zoom camera then works.

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2024-08-06
  3. Công cụWebZen 97d / 99b

    Hex editor: make main.exe load text.bmd instead of texttest.bmd (old 0.97 / 1.0 era client without launcher)

    1. Open main.exe in a hex editor and search the text texttest.bmd. 2. Overwrite it with text.bmd. 3. The new name is shorter: set the leftover bytes after it to 00, then save and start th...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2007-06-15
  4. Công cụWebZen 97d / 99b

    OllyDbg: "Unable to locate data in executable file" when saving a patched main.exe (main 1.0M)

    1. OllyDbg cannot save here because the Virtual Size and the Raw Size of the main differ. 2. Open main.exe with LordPE (sections) and change the values so Virtual Size and Raw Size are th...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2009-11-28
  5. Công cụWebZen 97d / 99bS3

    main.exe 1.03K JPN: how to make the main open only through the launcher (mu.exe) with OllyDbg

    1. Open main.exe (1.03K JPN) in OllyDbg and find the mu.exe check (search the referenced text strings for mu.exe). 2. At 005FA1DF there is EB 55 JMP SHORT main.005FA236, just before the P...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2011-09-09
  6. Công cụMuEmu / LouisS6

    MainInfo (MuEmu S6): a new custom item shows no model, texture or tooltip in game although item.bmd, tooltips and customitem.txt are edited

    1. Add the item on both sides: server item.txt, client Item.bmd, Itemtooltip.bmd, Eng/Item_eng.bmd and the tooltip files, and the model (sword101.bmd plus textures) in Data/Item. 2. Add t...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2016-10-26
  7. Client gameWebZen 97d / 99b97d

    Ultimate Main Second Edition (97d+99, ZergNM): items and maps show broken textures

    1. Open the settings file of this main and find the [Opengl] section. 2. Set Linear =0, MaxLinear =0 and Anisotropy =0. 3. Save and start the game again: the asker's textures were all fin...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2020-03-13
  8. Công cụWebZen 97d / 99b97d

    OllyDbg: how to give a 97d+99i main.exe a widescreen resolution (for example 1366x768)

    1. You need OllyDbg and an unpacked 97d+99i main.exe. 2. Open main.exe in OllyDbg, right click > Search for > All referenced text strings, find Resolution and double click it. 3. Below it...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2019-05-25
  9. Công cụWebZen 97d / 99b97d

    OllyDbg: how to find the Entry Point of a 97d+99 main.exe before hooking a DLL

    1. Open main.exe in OllyDbg: when it finishes loading it stops on the Entry Point. 2. If that Entry Point is the very first line, the main is packed: use an unpacked main.exe to hook the...

    ✓ Được người mở chủ đề xác nhậnImperyus Games Brasil · 2010-03-31
  10. Công cụWebZen 97d / 99b

    Main version converter: main.exe shows version 22:46, which ClientExeVersion has to go in the MuServer?

    1. The version stored in main.exe (here 22:46) is a coded form of the server ClientExeVersion, so it is not copied as it is. 2. Convert it with a version converter (one made by Mr.TwoHam...

    ✓ Được người mở chủ đề xác nhậnImperyus Games Brasil · 2011-03-19
  11. Client gameMuEmu / LouisS5.2

    Main 5.2 (Louis) with MuServer Update 15: 'WriteValidation > ProtocolSend Connect [0] Read Header Fail:End of file' when the client connects

    1. The asker fixed it (with help from son1xx2 on RaGEZONE) by building both the GameServer and the main without the new protocol system. 2. In the server source set #define NEW_PROTOCOL_S...

    ✓ Đã xác nhận trong issueGitHub (LouisEmulator/Main5.2) · 2022-11-23
  12. Công cụMuEmu / LouisSeason 6

    MainInfo (Louis Emulator S6): how to rename the sub servers and remove the '(Gold)' label with ServerList.bmd and CustomServerName.txt

    1. With Pentium Tools open the client Data/Local/ServerList.bmd: it has 3 entries; give all three the same server name (for example MeuServer). 2. On the server, note the number of each s...

    ✓ Được người mở chủ đề xác nhậnCreandoMU · 2022-10-09
  13. Công cụWebZen 97d / 99b97D

    LordPE / OllyDbg: hooking a DLL into a 97D main (Caron free main) fails because of the new entry point

    1. Stud_PE could not add the DLL to this main, so the asker used OllyDbg with the hook tutorial. 2. After adding the code, fix the new entry point of the main with LordPE. 3. Work out the...

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2018-08-22
  14. Công cụMuEmu / LouisSeason 6

    MainInfo (Louis Update 13): the main closes after adding custom NPCs (Mu Awakening NPC kit) although the NPC files are fine

    1. The problem is the folder set for the NPC in the CustomMonster config of MainInfo, not the NPC models. 2. Each line is MonsterID Type Name Dir Folder BMDFile Size (Type 0 = NPC, 1 = Mo...

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2019-08-03
  15. Công cụMuEmu / Louis0.97k

    InfoEncoder (Kayito MainInfo, 0.97k Update 19): GetMainInfo makes the files but the client no longer shows the server at start

    1. Since Update 19 the MainInfo tool is called InfoEncoder and uses a new folder layout (the same as the GitHub repository). 2. The InfoEncoder folder holds the files only the encoder rea...

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2023-11-12
  16. Công cụMuEmu / Louis

    GetMainInfo (MuEmu source 1.4e): item damage or defense above 255 shows wrong in the client; how the asker removed the limit

    1. The client side value comes from item.bmd and the BMD editors only read and write up to 255 in those fields. 2. The asker changed the main.dll and GetMainInfo sources (MuEmu source 1.4...

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2020-06-12
  17. Công cụMuEmu / Louis

    GetMainInfo (Louis Emulator): main.exe shows 'main.premium not found or invalid!!' after copying the MainInfo files

    1. Take the main.dll that is inside your GetMainInfo (MainInfo) folder. 2. Copy it into the client folder, replacing the old main.dll, so it matches the generated main premium files. 3. S...

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2020-03-30
  18. Công cụWebZen 97d / 99b

    main.exe version: 22345 plus the version number gives 112344 for 9.99.99 and the hex editor finds nothing

    1. The version in main.exe is 5 ASCII characters: each digit of the version gets its position (1 to 5) added. For 1.04.16 the quick rule works: 10416 minus 10000 = 416, 22345 + 416 = 2276...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2007-07-17
  19. Công cụMuEmu / Louis

    MainInfo: how to stop players from opening main.exe directly and force them to use the launcher

    1. In the MainInfo settings (MainInfo.ini) change Launcher=0 to Launcher=1, rebuild the main info file and copy it to the client. 2. LauncherType=1 works only together with the X-Team lau...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2018-08-29
  20. Công cụWebZen 97d / 99bS1

    Season 1 main.exe 1.00.08: how to remove the Dark Lord (or Magic Gladiator) create button with a custom DLL

    1. Write the change in a custom DLL loaded by the main (recommended in the thread; a byte change made with OllyDbg made the client close after character select). 2. For main 1.00.08, to r...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2018-11-13

Video trên MUTube

Thêm video cho “main”

Vẫn còn vướng mắc? Hỏi Trợ lý MU Tìm trên MuGPS

MuADMINS Community Alpha: miễn phí, do cộng đồng xây dựng, đang được phát triển tích cực.