Community AlphaAlpha MUADMINS
VITiếng Việt
Đăng nhập
Trên MuADMINSConfig ScannerTải lên zip file của bạn: rate, rơi đồ, spot, giới hạnMởTrên MuADMINSGặp chúng tôi trên DiscordNhờ giúp đỡ, chia sẻ những gì bạn đang làm và trò chuyện về MU với các chủ server khác.Mở

MuADMINS

Giải pháp

Các cách sửa ngắn gọn cho những lỗi thường gặp của server, client và website MU Online, mỗi cách đều kèm nguồn và ngày. “Đã xác nhận” nghĩa là người đặt câu hỏi cho biết cách sửa đã hiệu quả.

40 giải pháp cho “connectserver port” · Xóa lọc

  1. Cài đặt server

    How to change the ConnectServer port 44405, and login fails after changing it

    1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2010-12-21
  2. Client gameOpenMUany

    OpenMU: which connect server port should my client use, and why do I get disconnected right after choosing a server?

    1. Use port 44405 for the original client and 44406 for the open source client (sven-n/MuMain). 2. A disconnect right after server selection means the address reported by the IP resolver...

    MuADMINS viết lại từ nguồnNot verifiedGitHub (MUnique/OpenMU docs) · 2026-08-23
  3. Cài đặt serverMuEmu / LouisS8

    Two MuEmu S8 servers on one machine: the first works, the second disconnects at login although its ports (55902, 55920, 55961, 55971) are forwarded.

    1. Open the router page and check that the forwarding rules for the second server ports are really enabled, not only created. 2. If a rule turns itself off again after a refresh, delete i...

    ✓ Được người mở chủ đề xác nhậnTuServerMU · 2020-06-17
  4. Công cụBộ file khác

    Launcher auto update (Titan Tech SCF ConnectServer) never downloads the patch from a hosting FTP account

    1. The update FTP is set in the ConnectServer SCF_Config.ini, sections [FtpServerInfo] and [HttpServerInfo] (SCFAddress, SCFPort, SCFID, SCFPASS), with SCFClientVersion and SCFVersionFile...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2015-02-23
  5. Cài đặt serverX-TeamS8

    X-Team MuEmu S8E3: players cannot get in because Mu Hack Protection shows an error, even with the usual ports open.

    1. Open the MHP port 55999 TCP in the firewall and router, besides 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Port 55557 does not need to be opened. 3. Check...

    ✓ Được người mở chủ đề xác nhậnTuServerMU · 2017-04-21
  6. Cài đặt serverany

    Server on my home PC works for me with the IPv4 address, but friends get disconnected even with ports added to firewall and router. What is wrong?

    1. A private (LAN) address like 192.168.x.x only works inside your own network. 2. For outside players, put your public IP (or a No-IP hostname) in the server side IP settings (ConnectSer...

    ✓ Được người mở chủ đề xác nhậnTuServerMU · 2019-05-03
  7. Cài đặt serverMuEmu / Louis0.97k

    ConnectServer Cross-Platform (MuEmu kayito): how do I build and run the ConnectServer natively on Linux?

    1. Install the build tools: on Ubuntu or Debian sudo apt install build-essential cmake libboost-all-dev (CentOS: gcc-c++ cmake boost-devel; Arch: base-devel cmake boost). On Windows use V...

    MuADMINS viết lại từ nguồnNot verifiedGitHub (alisacorporation/ConnectServer) · 2025-11-02
  8. Cài đặt serverS2

    Client disconnects after choosing the server; the client log shows it connecting to someone else's IP (10.0.0.33, port 55901) with Pinkof Season 2 files

    The server files and the client still pointed to the IP of the person who packed them. 1. Put your own IP in the ConnectServer server list config. 2. Put your own IP in the JoinServer con...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2015-02-13
  9. Cài đặt serverSeason 18 Episode 2

    Client disconnects right after choosing the server (server on a VPS)

    The server list shows, so the ConnectServer port is open, but the client is dropped when it moves on to the GameServer: the GameServer port is closed somewhere. 1. Find the GameServer por...

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2023-09-16
  10. Cài đặt serverany

    My GameServer (port 55901 and up) sometimes fails to start because the port is already in use. How do I check the Windows dynamic port range?

    1. Since Windows Vista and Server 2008, outgoing connections use local ports 49152 to 65535 by default, which includes 55901, 55960, 55970. 2. Show the range: netsh int ipv4 show dynamicp...

    MuADMINS viết lại từ nguồnNot verifiedMicrosoft Learn · 2026-02-12
  11. Cài đặt server

    Two servers (x100 and x10) on two different VPS: the client only shows one of them in the server list

    1. Let one ConnectServer (on VPS 1, the machine that runs the full server) send the server list for both: add both GameServers to its server list with their server code, IP and port. 2. G...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2024-12-10
  12. Client gameOpenMUS6

    MuOnline Clone (MuMono): 'Data path not found', or the client cannot connect to the server

    1. The client needs the Season 20 (1.20.61) client data for its assets but speaks the Season 6 protocol. 2. *Data path not found*: set DataPath in Client.Main/Constants.cs to your Data fo...

    MuADMINS viết lại từ nguồnNot verifiedGitHub (bernatvadell/muonline) · 2026-01-08
  13. Công cụ

    Zyth3 Launcher: the server status check always shows the server offline

    1. In the launcher config put the server address as yourdomain.com or a plain IP like 123.101.12.102. 2. Do not write it as a web address like http://domain.com. 3. If your ConnectServer...

    MuADMINS viết lại từ nguồnNot verifiedRaGEZONE · 2015-03-13
  14. Cài đặt serverclassic (MMT)

    New sub server (MMT files) gives a bind error and restarts.

    1. The sub server used the same port as the main one. 2. Give it its own port (for example 55903) and open it in the firewall. 3. Change its ServerCode in ServerList and MapServerInfo and...

    ✓ Được người mở chủ đề xác nhậnImperyus Games Brasil · 2009-10-30
  15. Cài đặt server

    How to protect the server from attackers with the firewall

    Only the ConnectServer and GameServer must be reachable from outside. 1. In the firewall block outside access for: MySQL (mysqld.exe), the DataServer(s), ExDB, EventServer, RankingServer,...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2008-06-30
  16. Cài đặt server

    With the firewall turned on nobody can enter my server or my website; with it off they can

    The firewall blocks the server ports. 1. In the firewall allow (unblock) TCP 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Also allow port 80 for the website. 3....

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2012-07-14
  17. Cài đặt serverS3E1 (1.04H)

    GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)

    The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2008-06-03
  18. Cài đặt serverMuEmu / LouisS6

    Friends can join my MuEmu S6 server from outside, but I cannot connect from another PC in the same LAN as the server. Which port is missing?

    1. It is usually not a port: many routers do not let LAN PCs reach their own public IP (no NAT loopback). 2. Use a No-IP hostname as the server address in the ConnectServer server list, m...

    ✓ Được người mở chủ đề xác nhậnTuServerMU · 2020-07-14
  19. Công cụIGCN

    IGC.ToolKit: where to set the server IP, port, version and serial of an IGCN client (ServerInfo.xml to ServerInfo.bmd)

    1. Extract the game client on a normal PC (not on the Windows Server machine) and copy the content of \Client\Client Patch\ from the server package over it. 2. Open \Data\Local\ServerInfo...

    MuADMINS viết lại từ nguồnNot verifiedIGCN · 2022-09-15
  20. Công cụ

    [P4F] Launcher System 0.9.1 (free): how to make it start a main.exe that needs the server IP and port as parameters

    1. The free P4F launcher (Launcher System 0.9.1 by Killbrum, with auto update) works with any MU version; its settings editor saves the configuration in its own format so players cannot r...

    MuADMINS viết lại từ nguồnNot verifiedDarksTeam · 2021-12-15
Vẫn còn vướng mắc? Hỏi Trợ lý MU Tìm trên MuGPS Tìm trên MUTube

MuADMINS Community Alpha: miễn phí, do cộng đồng xây dựng, đang được phát triển tích cực.