MuADMINS
Giải pháp
Các cách sửa ngắn gọn cho những lỗi thường gặp của server, client và website MU Online, mỗi cách đều kèm nguồn và ngày. “Đã xác nhận” nghĩa là người đặt câu hỏi cho biết cách sửa đã hiệu quả.
162 giải pháp cho “m list” · Xóa lọc
All servers start fine, but in game after pressing Connect it says "You are disconnected from the server"
The ConnectServer files still had a wrong IP. 1. Edit these files and put your local IP in each: D:\MuServer\CS\Connectserverlist, D:\MuServer\CS\Data\Connectserverlist, D:\MuServer\CS\Da...
✓ Được người mở chủ đề xác nhậnDarksTeam · 2009-05-24Two separate servers (not subservers) both show in the client as server 1 with the same name
The client serverlist file was broken, not the server codes. 1. Replace the client Data serverlist.bmd with a working one (for example from another client of the same version) and edit th...
✓ Được người mở chủ đề xác nhậnTUServerMU · 2021-06-18How to remove the master skill tree skills from every character at once (S6 Up15 GamingMaster files); DELETE MasterSkillTree did not remove them
The learned skills are stored in the MagicList column of the Character table. 1. Back up the database and close the server. 2. Run: USE MuOnline; UPDATE Character SET [MagicList] = CONVER...
✓ Được người mở chủ đề xác nhậnTUServerMU · 2021-05-09MuEmu S6E3: after editing movereq_eng.bmd the M window lists the right maps but then breaks, although Move.txt matches
1. The problem was the editor: MagicHand (and Pentium Tools) saved a damaged movereq_eng.bmd for this client. 2. Edit the file again with MU ToolKit Silver Edition and save it. 3. Keep th...
✓ Được người mở chủ đề xác nhậnRaGEZONE · 2018-02-20Where do I change how much damage monsters do? Is it MonsterSetBase?
1. Not MonsterSetBase (that file only places monsters on maps). 2. MuEmu style files: open Monster.txt and change the DamageMin and DamageMax columns of the monster. 3. Files with XML dat...
✓ Được người mở chủ đề xác nhậnRaGEZONE · 2023-08-30The server select screen shows my server as 'Name-12'; how do I make it show 1?
1. The number after the name is the GameServer code plus 1: code 11 in the ConnectServer server list shows as 12 in the client. That is normal. 2. Change the server code to 0 in the Conne...
✓ Được người mở chủ đề xác nhậnRaGEZONE · 2018-02-01Season 2 files (KarLi tutorial): everything starts except GameServerCS, which fails
1. Use your LAN address (192.168.x.x) only in MapServerInfo.dat and in the ConnectServer ServerList.dat. 2. Everywhere else in the server configs and the startup put 127.0.0.1. 3. In main...
✓ Được người mở chủ đề xác nhậnRaGEZONE · 2018-10-25Yomalex MuEmu (C#) with the Season 9 client: CSEmu lists the server but the client shows "You are disconnected from the server" a few seconds after start.
1. The Season 9 client used by this project is an IGCN client: rename the project Main.dll to IGC.dll and replace it in the client. 2. Do not use 127.0.0.1 as the server address: the clie...
✓ Đã xác nhận trong issueGitHub (Yomalex/MuEmu) · 2023-06-28MuEmu 0.97k (kayito): how do I make a second server show up in its own box ("Server 2") on the server selection screen?
1. The selection screen groups GameServers by ServerCode, 20 codes per box. 2. ServerCode 0 to 19 appear under Server 1, 20 to 39 under Server 2, 40 to 59 under Server 3, and so on. 3. Gi...
✓ Đã xác nhận trong issueGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2024-12-04OpenMU local server without internet fails with "Could not start the server listeners: Name does not resolve (api.ipify.org:443)".
1. The default Public IP resolver asks api.ipify.org for your public IP, which fails offline. 2. For local play, open the admin panel, game configuration, System. 3. Set the IP resolve se...
✓ Đã xác nhận trong issueGitHub (MUnique/OpenMU) · 2023-11-16Two MuEmu S8 servers on one machine: the first works, the second disconnects at login although its ports (55902, 55920, 55961, 55971) are forwarded.
1. Open the router page and check that the forwarding rules for the second server ports are really enabled, not only created. 2. If a rule turns itself off again after a refresh, delete i...
✓ Được người mở chủ đề xác nhậnTuServerMU · 2020-06-17One player does not see Crywolf in the move list while other players do.
1. The client reads the move texts per language from Data/Local. 2. That player had a language without the edited files. 3. Set LANG to ENG in the client registry key (or edit the files o...
✓ Được người mở chủ đề xác nhậnTuServerMU · 2020-08-17OpenMU in Docker on Windows: the client sees the server list but is disconnected when joining a server.
1. Use the client version the server targets (1.04d English, Season 6 E3). 2. Open the ports in the Windows firewall (and allow NAT edge traversal). 3. The connect server hands out the IP...
✓ Đã xác nhận trong issueGitHub (MUnique/OpenMU) · 2019-11-12MHP antihack says 'Client is locked' after a debugger (Visual Studio) was attached to the client once (MuEmu).
Open MuServer/MHPServer/BlackList.txt and remove the blocked IP, then try again.
✓ Được người mở chủ đề xác nhậnTuServerMU · 2019-05-30'You are disconnected from the server' when selecting the server, after the IP was changed in many config files (MuEmu files).
1. Put your IP only in ConnectServer/ServerList.dat and GameServer Data/MapServerInfo.dat. 2. Leave every other IP entry at 127.0.0.1. 3. If you use the antihack, open its port 55999. 4....
✓ Được người mở chủ đề xác nhậnTuServerMU · 2021-02-20The server list shows, but selecting the server disconnects at once (Louis S6 Update 4 premium files with a premium client).
1. Check the ports are open. 2. Check the IPs. 3. Make the client serial exactly the same as the serial in the files; the client serial was the missing part.
✓ Được người mở chủ đề xác nhậnTuServerMU · 2018-11-10A character exists in the Character table but does not appear (AccountCharacter slots)
The character list of an account is kept in AccountCharacter (Id = account, GameID1 to GameID5, or to GameID10 on newer files, plus GameIDC). The packs' WZ_CreateCharacter writes the new...
Not verifiedDo MuADMINS biên soạnzFileManager 1.0.2.0: which zTeam Season 8 client files it converts to txt or xml and edits
1. zFileManager (beta, by LockMU) supports the zTeam Season 8 Episode 2 files and converts client files to .txt or .xml in the zTeam format, with a built in editor and fast find and repla...
MagicHand 2.0 BETA: how to run it and convert client BMD files for the server (archivos/txt folder)
1. MagicHand is a web editor written in PHP5, not a desktop program: install AppServ or XAMPP and open it in any browser except Internet Explorer. 2. It edits the client BMD files (from B...
ConnectServer Cross-Platform (MuEmu kayito): how do I build and run the ConnectServer natively on Linux?
1. Install the build tools: on Ubuntu or Debian sudo apt install build-essential cmake libboost-all-dev (CentOS: gcc-c++ cmake boost-devel; Arch: base-devel cmake boost). On Windows use V...