MuADMINS
Çözümler
Yaygın MU Online sunucu, client ve web sitesi sorunları için kısa düzeltmeler; her biri kaynağı ve tarihiyle. “Onaylanmış”, soruyu soran kişinin düzeltmenin işe yaradığını söylediği anlamına gelir.
33 çözüm “serverlist.dat” için · Temizle
MagicHand does not work to edit ServerList.bmd of a Season 6 client
1. MagicHand is a PHP editor: it does not run by opening its files directly. Put it in the XAMPP htdocs folder, next to your web site files. 2. Start Apache in XAMPP and open the editor f...
✓ Konu sahibi tarafından onaylandıRaGEZONE · 2011-05-27MainInfo (Louis Emulator S6): how to rename the sub servers and remove the '(Gold)' label with ServerList.bmd and CustomServerName.txt
1. With Pentium Tools open the client Data/Local/ServerList.bmd: it has 3 entries; give all three the same server name (for example MeuServer). 2. On the server, note the number of each s...
✓ Konu sahibi tarafından onaylandıCreandoMU · 2022-10-09ServerList (MuEmu): two sub servers both show as Gold in the server list; how the server code decides Gold or Free
1. MuEmu splits the server codes in ranges: ServerCode 0 to 8 (servers 1 to 9) show as Gold. 2. ServerCode 9 to 19 (servers 10 to 20) show as Free, with no label; code 19 is the one that...
✓ Konu sahibi tarafından onaylandıTUServerMU · 2017-07-26Text.bmd: a MuEmu Season 4 client has no ServerList.bmd; where are the server names changed?
1. Season 4 clients have no ServerList.bmd in Data\Local\Eng, Por or Spn like newer clients. 2. The server names are in Text.bmd inside the client Data\Local folder. 3. Open Text.bmd with...
✓ Konu sahibi tarafından onaylandıTUServerMU · 2019-07-06ServerList.bmd (MuEmu Season 6): a third server added with MagicHand does not appear in the client list
1. Editing the current ServerList with MagicHand did not help in this case: the list kept showing only two servers. 2. Take the ServerList file from another client (the asker used a 2012...
✓ Konu sahibi tarafından onaylandıTUServerMU · 2021-01-09Kayito 0.97k update 23: Chinese server names in ServerList.dat show garbled, changing the file encoding does not help.
1. Update 23 converts the text with IsEncodingAnsi in MemScript.cpp, which broke it. 2. The maintainer corrected it for the next release (update 24), so update to update 24 or later. 3. A...
✓ Sorun kaydında onaylandıGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2024-08-30MuMain: where is ServerList.bmd, and how do I name the server groups or put a game server into a second group?
1. The open source client replaced the encrypted Data/Local/ServerList.bmd with Data/Local/ServerList.json, read at start. 2. Each group has an id, a name, an optional description and cha...
ServerList Editor: how to mark a server as Gold, Gold PVP, Non-PVP or Normal in ServerList.bmd
1. Install .NET Framework 2.0 (x86 or x64) and open your ServerList.bmd with the editor (English language was added in update 1). 2. The table columns 1 to 15 are the server indexes insid...
How do I show sub servers grouped under one server in the list?
1. In Connectserverlist.dat the codes are 0, 1, 2... 2. Change them to 0, 21, 41, 61 (steps of 20). 3. The ConnectServer then reads them as rooms of the servers.
✓ Konu sahibi tarafından onaylandıImperyus Games Brasil · 2010-12-14Season 2 files (KarLi tutorial): everything starts except GameServerCS, which fails
1. Use your LAN address (192.168.x.x) only in MapServerInfo.dat and in the ConnectServer ServerList.dat. 2. Everywhere else in the server configs and the startup put 127.0.0.1. 3. In main...
✓ Konu sahibi tarafından onaylandıRaGEZONE · 2018-10-25'You are disconnected from the server' when selecting the server, after the IP was changed in many config files (MuEmu files).
1. Put your IP only in ConnectServer/ServerList.dat and GameServer Data/MapServerInfo.dat. 2. Leave every other IP entry at 127.0.0.1. 3. If you use the antihack, open its port 55999. 4....
✓ Konu sahibi tarafından onaylandıTuServerMU · 2021-02-20Pentium Tools / text.bmd (Season 4 client without serverlist.bmd): how to change the words shown next to each server, for example slow and fast
1. Searching and editing the words in text.bmd alone did not change the list for the asker. 2. Give the server the code 20 both in the ConnectServer server list and in the ServerInfo file...
✓ Konu sahibi tarafından onaylandıTUServerMU · 2017-08-21MagicHand: which client files hold the server names, skill names and other texts of a MuEmu S6E3 client
1. Open the client files with MagicHand. 2. Skill names: Data/Local/Eng/skill_eng.bmd. 3. Server names in the server list: Data/Local/ServerList.bmd. 4. Other game texts: Data/Local/Eng/t...
✓ Konu sahibi tarafından onaylandıTUServerMU · 2018-02-04New sub server (MMT files) gives a bind error and restarts.
1. The sub server used the same port as the main one. 2. Give it its own port (for example 55903) and open it in the firewall. 3. Change its ServerCode in ServerList and MapServerInfo and...
✓ Konu sahibi tarafından onaylandıImperyus Games Brasil · 2009-10-30All servers start fine, but in game after pressing Connect it says "You are disconnected from the server"
The ConnectServer files still had a wrong IP. 1. Edit these files and put your local IP in each: D:\MuServer\CS\Connectserverlist, D:\MuServer\CS\Data\Connectserverlist, D:\MuServer\CS\Da...
✓ Konu sahibi tarafından onaylandıDarksTeam · 2009-05-24Two separate servers (not subservers) both show in the client as server 1 with the same name
The client serverlist file was broken, not the server codes. 1. Replace the client Data serverlist.bmd with a working one (for example from another client of the same version) and edit th...
✓ Konu sahibi tarafından onaylandıTUServerMU · 2021-06-18How do I change the server name shown in the client server list?
1. Season 6 clients: the name is in Client\Data\Local\ServerList.bmd. 2. Open it with MagicHand: Files BMD > ServerList > Edit File ServerList.bmd, load your file, edit the name and save....
✓ Konu sahibi tarafından onaylandıRaGEZONE · 2012-11-25Two MuEmu S8 servers on one machine: the first works, the second disconnects at login although its ports (55902, 55920, 55961, 55971) are forwarded.
1. Open the router page and check that the forwarding rules for the second server ports are really enabled, not only created. 2. If a rule turns itself off again after a refresh, delete i...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2020-06-17ConnectServer Cross-Platform (MuEmu kayito): how do I build and run the ConnectServer natively on Linux?
1. Install the build tools: on Ubuntu or Debian sudo apt install build-essential cmake libboost-all-dev (CentOS: gcc-c++ cmake boost-devel; Arch: base-devel cmake boost). On Windows use V...
Kaynağın MuADMINS tarafından yeniden yazılmış haliNot verifiedGitHub (alisacorporation/ConnectServer) · 2025-11-02The server select screen shows my server as 'Name-12'; how do I make it show 1?
1. The number after the name is the GameServer code plus 1: code 11 in the ConnectServer server list shows as 12 in the client. That is normal. 2. Change the server code to 0 in the Conne...
✓ Konu sahibi tarafından onaylandıRaGEZONE · 2018-02-01
MUTube videoları
Sunucu Listesi İsmi nasıl düzenlenir - MU Online
District Gaming · 5:07 · 2019
Config ServerList Mu Online | Files Premium KG Up 20.8 | By BenjaminTv
BenjaminTv · 5:14 · 2024
ConnectServer'dan Custom Sunucu Listesi - kayito
Nicolás Muratona · 3:15 · 2021
[Гайд] Создание вещи для Mu Online в MilkShape 3D
mmorpgandonlinegames · 14:59 · 2012