Community AlphaAlpha MUADMINS
TRTürkçe
Giriş yap
MuADMINS'teConfig ScannerDosyalarının zip'ini yükle: rate'ler, droplar, spotlar, limitlerAçMuADMINS'teDiscord'da buluşalımYardım iste, üzerinde çalıştığın şeyleri paylaş ve diğer sunucu sahipleriyle MU hakkında konuş.Aç

MuADMINS

Çözümler

Yaygın MU Online sunucu, client ve web sitesi sorunları için kısa düzeltmeler; her biri kaynağı ve tarihiyle. “Onaylanmış”, soruyu soran kişinin düzeltmenin işe yaradığını söylediği anlamına gelir.

96 çözüm “att” için · Temizle

  1. Oyun client'ı

    How to install a downloaded Lorencia map skin (client folders and server .att file)

    1. Read the notes in the archive or its release thread first. 2. Put the two folders of the skin into the client Data\ folder and replace all files. 3. On the server, copy the skin's .att...

    ✓ Konu sahibi tarafından onaylandıRaGEZONE · 2017-01-09
  2. Araçlar

    Map3Layer and MapConvert: how to edit the ground texture layers of a client .map file and get the server .att

    1. Decrypt the client .map file first. 2. Open it with map3layer: it gives 3 output layers, edit each of them. 3. After editing, use MapConvert (MG) to encode them again; for the server,...

    ✓ Konu sahibi tarafından onaylandıRaGEZONE · 2010-01-02
  3. Araçlar

    MuWorldEditor 0.3.0: after editing Lorencia, how to make the server terrain file (Terrain1.att) from the edited map

    1. Open the MagicHand web tool and go to the .att / map section. 2. Choose Decode .att and select the client EncTerrain1.att from the World1 folder. 3. It gives you a file named DecTerrai...

    ✓ Konu sahibi tarafından onaylandıTUServerMU · 2017-10-19
  4. Araçlar

    MagicHand: how to decode an edited map .att file for the server (Encterrain to Decterrain)

    1. Put the .att file in the editor's att folder. 2. Open the editor and go to the .att menu, click decode.att. 3. The decode.att entry turns red: double click the .att image you want to d...

    Kaynağın MuADMINS tarafından yeniden yazılmış haliNot verifiedRaGEZONE · 2010-02-24
  5. AraçlarWebZen 97d / 99b97d-1.0

    EncTerrain.obj: how to edit object placement in hex, or move a copied map's objects to a new World number

    1. The client EncTerrainX.obj is encrypted: decrypt it first with the Enc to Normal map/obj converter that comes in the guide's mapedit pack. Hex editing the encrypted file shows nothing...

    ✓ Konu sahibi tarafından onaylandıRaGEZONE · 2006-04-23
  6. AraçlarDiğer server filesS6

    MoveReq.bmd: a map (Barracks) added at the bottom of the M list does not show in game (ENC Season 6)

    1. The client does not read new rows added to the end of movereq.bmd, and a movereq.bmd from other files can show as jumbled ASCII characters in a different client. 2. Instead of adding a...

    ✓ Konu sahibi tarafından onaylandıRaGEZONE · 2011-05-14
  7. AraçlarMuEmu / LouisS8

    MuEmu S8 client: NPC names on the transparent (TAB) map do not change after editing minimap_eng.bmd in the client

    1. A reply points to the client Data\Local\Eng\minimap_eng.bmd for the coordinates, but in these MuEmu S8 files the NPC names shown on the transparent map come from the server. 2. Edit th...

    ✓ Konu sahibi tarafından onaylandıRaGEZONE · 2016-06-09
  8. Araçlar

    How to change the map name image that appears when entering a map (ImgMapNames)

    1. The map name images are in the client Data\Local\Eng\ImgMapNames\ folder, one file per map. 2. Convert the file of that map to a normal image with Pentium Tools. 3. Write the new text...

    ✓ Konu sahibi tarafından onaylandıRaGEZONE · 2018-05-18
  9. AraçlarS6E3

    Minimap BMD (S6E3): how to change, remove or add the location points shown on the map screen

    1. The points of each map are in the client Data\Local\Eng\Minimap\ folder, one .bmd per map. 2. Open it with Pentium Tools or MagicHand and change the text and coordinates of the existin...

    ✓ Konu sahibi tarafından onaylandıRaGEZONE · 2017-12-04
  10. AraçlarWebZen 97d / 99b

    MUimgGUI: the map name shown when you move to a city is in Korean; where is it translated?

    1. That name is not in text.bmd: it is an image in Data\Interface of the client, for example lorencia.OZT (OZT is a TGA, used because of the transparency). The other map names are .OZT fi...

    ✓ Konu sahibi tarafından onaylandıImperyus Games Brasil · 2016-03-23
  11. Araçlar

    WorldEditor: a new area of the map sends the player back to Lorencia; which file does the server need after editing EncTerrain?

    1. Know the three client files: .map holds the ground design and heights, .obj the objects, .att the zone attributes (walkable, safe zone, PvP). 2. When you save in WorldEditor, EncTerrai...

    ✓ Konu sahibi tarafından onaylandıTUServerMU · 2019-10-10
  12. Araçlar

    MuWorldEditor: objects, height and lights change in game but the ground texture stays the original after saving the map

    1. Look at the files the editor saves: EncTerrain1.att, EncTerrain1.obj, TerrainHeight.ozb and a file named only EncTerrain1 with no extension. 2. That last file is the ground texture map...

    ✓ Konu sahibi tarafından onaylandıTUServerMU · 2020-04-06
  13. Oyun client'ıSeason 6

    After changing the Lorencia map skin in the client, characters walk through walls and objects (the server terrain no longer matches)

    Every time you change a map on the client side, the server terrain must be made from that same client map. 1. Take the client encrypted terrain of the map (EncTerrain file of Lorencia). 2...

    ✓ Konu sahibi tarafından onaylandıTUServerMU · 2020-02-07
  14. Oynanış

    Players are disconnected inside Blood Castle; the GameServer log shows 'create monster fail - wrong map [173]'

    1. The Blood Castle monsters in the monster spawn XML were edited and some entries point to map code 173, which does not exist, so spawning them fails and players are dropped. 2. Revert e...

    ✓ Konu sahibi tarafından onaylandıRaGEZONE · 2024-02-14
  15. OynanışMuEmu / Louis0.97k

    Kayito 0.97k: a boss spawned in MAP_ARENA gets stuck at a point and stops fighting back.

    1. This was a server bug reported to the maintainer. 2. He marked it fixed in August 2026, so use the latest update of the repository. 3. Rebuild or replace your GameServer with the updat...

    ✓ Sorun kaydında onaylandıGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2026-08-27
  16. OynanışMuEmu / LouisS8E3

    MuEmu S8 Ep3: the Kalima portal (Lost Map) goes back to the inventory instead of opening.

    1. Drop it outside safe zones. 2. On these files the Kalima maps run on the Castle Siege GameServer, so the portal must be dropped while on the CS server.

    ✓ Konu sahibi tarafından onaylandıTuServerMU · 2021-02-03
  17. AraçlarMuEmu / Louis0.97k

    MU Map & Move Manager: how do I add a new map with its gate and M window move entry on MuEmu kayito files?

    1. Run python app.py (or Ejecutar.bat) and select the main Data folder of the server, for example C:\MuServerKayito\Data. Do not select Data\Move: the tool also needs Data\MapManager.txt....

    Kaynağın MuADMINS tarafından yeniden yazılmış haliNot verifiedGitHub (Azzlaer/MU_Move_Editor) · 2026-08-17
  18. AraçlarOpenMU

    OpenMU admin panel: how do I add or move monster spawns and gates on a map?

    1. Open Configuration, Map editor (/map-editor) and select the map. 2. Click Monster spawn area, Enter gate or Exit gate, draw it on the map and confirm it. 3. Click an object to focus it...

    Kaynağın MuADMINS tarafından yeniden yazılmış haliNot verifiedGitHub (MUnique/OpenMU) · 2026-10-18
  19. AraçlarMuEmu / Louis0.97k

    Kayito 0.97k main: maps from the original 0.97 client do not work with it; which map files does it need?

    1. The original 0.97 client uses unencrypted Terrain.att, Terrain.obj and Terrain.map. 2. Kayito adapted this main to read EncTerrain.att, EncTerrain.map and EncTerrain.obj, the format al...

    Not verifiedTUServerMU · 2022-05-05
  20. Araçlar

    MUWorldEditor 0.2.0 (orz8): how to add, delete and move objects and move the camera on a map

    1. Open the map folder and load the encrypted EncTerrainX.map of that map. 2. Go to the object sub interface on the toolbar and pick the object in the object menu. 3. Hold Ctrl and left c...

    Kaynağın MuADMINS tarafından yeniden yazılmış haliNot verifiedRaGEZONE · 2009-11-29

MUTube videoları

“att” için daha fazla video

Hâlâ takıldınız mı? MU Asistanı'na sor MuGPS'te ara

MuADMINS Community Alpha: ücretsiz, topluluk tarafından yapılıyor, aktif geliştirmede.