MuADMINS
Çözümler
Yaygın MU Online sunucu, client ve web sitesi sorunları için kısa düzeltmeler; her biri kaynağı ve tarihiyle. “Onaylanmış”, soruyu soran kişinin düzeltmenin işe yaradığını söylediği anlamına gelir.
80 çözüm “ConnectServer” için · Temizle
Launcher auto update (Titan Tech SCF ConnectServer) never downloads the patch from a hosting FTP account
1. The update FTP is set in the ConnectServer SCF_Config.ini, sections [FtpServerInfo] and [HttpServerInfo] (SCFAddress, SCFPort, SCFID, SCFPASS), with SCFClientVersion and SCFVersionFile...
✓ Konu sahibi tarafından onaylandıRaGEZONE · 2015-02-23How to change the ConnectServer port 44405, and login fails after changing it
1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...
✓ Konu sahibi tarafından onaylandıDarksTeam · 2010-12-21On a 0.99b server the ConnectServer closes by itself when I replace the numeric IP with a No-IP hostname. Why?
1. Old 0.99b ConnectServer builds only accept an address as long as a numeric IP. 2. Keep the hostname at 14 characters or less including the dots (the length of a full IPv4 address strin...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2021-02-10ConnectServer Cross-Platform (MuEmu kayito): how do I build and run the ConnectServer natively on Linux?
1. Install the build tools: on Ubuntu or Debian sudo apt install build-essential cmake libboost-all-dev (CentOS: gcc-c++ cmake boost-devel; Arch: base-devel cmake boost). On Windows use V...
Kaynağın MuADMINS tarafından yeniden yazılmış haliNot verifiedGitHub (alisacorporation/ConnectServer) · 2025-11-02IGC Dashboard: how to configure the client patch (ServerInfo Dashboard section, ConnectServer config.ini, setting.json)
1. In ServerInfo.xml set the <Dashboard Run="1" ExeName="Dashboard.exe" Path="Dashboard" IsNative="1" LauncherProxyConnectServerID="-1" MainProcessName="main" MemoryShareName="IGCDashBoar...
ConnectServer and GameServer drop every few hours with WSASend error 10054 and protocol header errors once many players join.
1. Check the real player limit of your files: these were built for 250 users, not 1000. 2. Above that number the server falls over. 3. Add a sub server (another GameServer) to spread play...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2021-05-30Two servers (x100 and x10) on two different VPS: the client only shows one of them in the server list
1. Let one ConnectServer (on VPS 1, the machine that runs the full server) send the server list for both: add both GameServers to its server list with their server code, IP and port. 2. G...
✓ Konu sahibi tarafından onaylandıRaGEZONE · 2024-12-10MagicHand does not work to edit ServerList.bmd of a Season 6 client
1. MagicHand is a PHP editor: it does not run by opening its files directly. Put it in the XAMPP htdocs folder, next to your web site files. 2. Start Apache in XAMPP and open the editor f...
✓ Konu sahibi tarafından onaylandıRaGEZONE · 2011-05-27MainInfo (Louis Emulator S6): how to rename the sub servers and remove the '(Gold)' label with ServerList.bmd and CustomServerName.txt
1. With Pentium Tools open the client Data/Local/ServerList.bmd: it has 3 entries; give all three the same server name (for example MeuServer). 2. On the server, note the number of each s...
✓ Konu sahibi tarafından onaylandıCreandoMU · 2022-10-09ServerList (MuEmu): two sub servers both show as Gold in the server list; how the server code decides Gold or Free
1. MuEmu splits the server codes in ranges: ServerCode 0 to 8 (servers 1 to 9) show as Gold. 2. ServerCode 9 to 19 (servers 10 to 20) show as Free, with no label; code 19 is the one that...
✓ Konu sahibi tarafından onaylandıTUServerMU · 2017-07-26Text.bmd: a MuEmu Season 4 client has no ServerList.bmd; where are the server names changed?
1. Season 4 clients have no ServerList.bmd in Data\Local\Eng, Por or Spn like newer clients. 2. The server names are in Text.bmd inside the client Data\Local folder. 3. Open Text.bmd with...
✓ Konu sahibi tarafından onaylandıTUServerMU · 2019-07-06ServerList.bmd (MuEmu Season 6): a third server added with MagicHand does not appear in the client list
1. Editing the current ServerList with MagicHand did not help in this case: the list kept showing only two servers. 2. Take the ServerList file from another client (the asker used a 2012...
✓ Konu sahibi tarafından onaylandıTUServerMU · 2021-01-09Kayito 0.97k update 23: Chinese server names in ServerList.dat show garbled, changing the file encoding does not help.
1. Update 23 converts the text with IsEncodingAnsi in MemScript.cpp, which broke it. 2. The maintainer corrected it for the next release (update 24), so update to update 24 or later. 3. A...
✓ Sorun kaydında onaylandıGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2024-08-30How do I change the server name shown in the client server list?
1. Season 6 clients: the name is in Client\Data\Local\ServerList.bmd. 2. Open it with MagicHand: Files BMD > ServerList > Edit File ServerList.bmd, load your file, edit the name and save....
✓ Konu sahibi tarafından onaylandıRaGEZONE · 2012-11-25A local test server does not appear in the client server list (MuEmu S6 E3 files).
1. Run ipconfig and take the IPv4 address. 2. Put that IPv4 (not 127.0.0.1 and not the sample IP from a guide) in MAIN_INFO and AH_INFO. 3. Regenerate and copy the files into the client....
✓ Konu sahibi tarafından onaylandıTuServerMU · 2019-01-25MuMain: where is ServerList.bmd, and how do I name the server groups or put a game server into a second group?
1. The open source client replaced the encrypted Data/Local/ServerList.bmd with Data/Local/ServerList.json, read at start. 2. Each group has an id, a name, an optional description and cha...
ServerList Editor: how to mark a server as Gold, Gold PVP, Non-PVP or Normal in ServerList.bmd
1. Install .NET Framework 2.0 (x86 or x64) and open your ServerList.bmd with the editor (English language was added in update 1). 2. The table columns 1 to 15 are the server indexes insid...
MainInfo and Louis files on a local PC: the game cannot connect to 127.0.0.1 (nothing on 127.0.0.1 works on that PC)
1. Use the network IP of the PC (the LAN address) instead of 127.0.0.1. 2. Put that IP in MapServerInfo.dat, in the ConnectServer configuration and in MainInfo. 3. Common.dat can stay wit...
✓ Konu sahibi tarafından onaylandıCreandoMU · 2021-03-26Pentium Tools / text.bmd (Season 4 client without serverlist.bmd): how to change the words shown next to each server, for example slow and fast
1. Searching and editing the words in text.bmd alone did not change the list for the asker. 2. Give the server the code 20 both in the ConnectServer server list and in the ServerInfo file...
✓ Konu sahibi tarafından onaylandıTUServerMU · 2017-08-21How do I show sub servers grouped under one server in the list?
1. In Connectserverlist.dat the codes are 0, 1, 2... 2. Change them to 0, 21, 41, 61 (steps of 20). 3. The ConnectServer then reads them as rooms of the servers.
✓ Konu sahibi tarafından onaylandıImperyus Games Brasil · 2010-12-14
MUTube videoları
Sunucu Listesi İsmi nasıl düzenlenir - MU Online
District Gaming · 5:07 · 2019
Config ServerList Mu Online | Files Premium KG Up 20.8 | By BenjaminTv
BenjaminTv · 5:14 · 2024
ConnectServer'dan Custom Sunucu Listesi - kayito
Nicolás Muratona · 3:15 · 2021
[Гайд] Создание вещи для Mu Online в MilkShape 3D
mmorpgandonlinegames · 14:59 · 2012