Community AlphaAlpha MUADMINS
TRTürkçe
Giriş yap
MuADMINS'teConfig ScannerDosyalarının zip'ini yükle: rate'ler, droplar, spotlar, limitlerAçMuADMINS'teDiscord'da buluşalımYardım iste, üzerinde çalıştığın şeyleri paylaş ve diğer sunucu sahipleriyle MU hakkında konuş.Aç

MuADMINS

Çözümler

Yaygın MU Online sunucu, client ve web sitesi sorunları için kısa düzeltmeler; her biri kaynağı ve tarihiyle. “Onaylanmış”, soruyu soran kişinin düzeltmenin işe yaradığını söylediği anlamına gelir.

230 çözüm “config.ini” için · Temizle

  1. Sunucu kurulumuany

    During SQL Server setup the password for sa is rejected no matter what I type. Why?

    1. Setup enforces the Windows password policy on the sa password. 2. Use at least 8 characters that mix uppercase letters, lowercase letters and numbers (a symbol helps too). 3. Do not us...

    ✓ Konu sahibi tarafından onaylandıTuServerMU · 2017-07-21
  2. Sunucu kurulumuMuEmu / LouisS6

    MuEmu S6 (KoshGames/Louis) on SQL Server Express 2012: JoinServer says "Could not connect to database" although MuOnline is restored and the .reg files were run.

    1. SQL Express installs a named instance, usually SQLEXPRESS, so (local) alone does not reach it. 2. Open the ODBC admin for your Windows bits and create the DSNs by hand. 3. In the serve...

    ✓ Konu sahibi tarafından onaylandıTuServerMU · 2020-08-08
  3. Sunucu kurulumuany

    SQL Server 2012 installed without errors but SQL Server Agent will not start (Browser starts fine) when preparing MU files. What fixed it?

    1. In services.msc set SQL Server Agent to Automatic and try to start it. 2. If it still fails, the instance was installed with the wrong authentication choice. 3. Reinstall SQL Server an...

    ✓ Konu sahibi tarafından onaylandıTuServerMU · 2018-11-19
  4. Sunucu kurulumuMuEmu / LouisS6

    MuEmu S6 DataServer and JoinServer show "Could not connect to database" on SQL 2008 R2 even after renaming MuOnlineS6 to MuOnline. What fixed it?

    1. In the DataServer and JoinServer config files make sure the database name is the one you restored (MuOnline, not MuOnlineS6). 2. Delete the old or duplicate MuOnline DSNs and create th...

    ✓ Konu sahibi tarafından onaylandıTuServerMU · 2018-06-06
  5. OynanışDiğer server filesS6

    ExTeam S6E3: moving to Dungeon (also with the GM move command or by walking through the entrance) sends the character straight back to Lorencia; other maps work.

    1. Check that World2/Object2 exist in the client and that gates.txt has the Dungeon (map 1) gates. 2. The real cause was the Dungeon Siege event config, which locks the map. 3. Disable Du...

    ✓ Konu sahibi tarafından onaylandıRaGEZONE · 2021-04-11
  6. Sunucu kurulumuMuEmu / LouisS6

    KoshGames S6.3 files (MuEmu base): any small edit to InvasionManager makes the GameServers fail as if the file were broken.

    1. Windows Notepad was corrupting the file when saving. 2. Edit the config with Notepad++ or Sublime Text, keeping the original encoding. 3. Save and restart the GameServers.

    ✓ Konu sahibi tarafından onaylandıTuServerMU · 2021-02-06
  7. Web sitesiany

    MuCore 2.2.0 installer stops with 'SQL Failed' at the connection step.

    1. Open TCP port 1433 in the Windows firewall. 2. In SQL Server Configuration Manager enable Named Pipes and TCP/IP, set IPAll TCP Port 1433. 3. Restart SQL Server and run the installer a...

    ✓ Konu sahibi tarafından onaylandıTuServerMU · 2019-07-27
  8. Web sitesiany

    After switching to new server files with a new database, the MuCore site no longer detects the database and players cannot register.

    1. The new database does not contain the MuCore tables. 2. Run the MuCore installer again against the new database so it creates its tables. 3. Check config.SQL.php points to the new DB.

    ✓ Konu sahibi tarafından onaylandıTuServerMU · 2018-11-19
  9. Web sitesiany

    After replacing MuCore 1.0.8 with MVCore 1.17.1 on the host, the installer does not appear and the site cannot connect to SQL.

    1. Delete all old files in public_html (leftover MuCore files and config). 2. Upload MVCore again; the installer then opens. 3. Enter the SQL data in the installer; it connects normally.

    ✓ Konu sahibi tarafından onaylandıTuServerMU · 2018-06-03
  10. Web sitesiMuEmu / LouisS6

    WebEngine vote module with MuEmu files does not add the GP/points after voting.

    1. AdminCP > Credit configuration used by the vote reward. 2. Set User Identifier to Username (the MuEmu table stores the account name). 3. Save and vote again to test.

    ✓ Konu sahibi tarafından onaylandıTuServerMU · 2018-06-22
  11. Web sitesiMuEmu / LouisS6

    DMN CMS with MuEmu S6E3 files: reset and grand reset modules do not work.

    1. Open the Character table in SQL and read the exact column names. 2. In the DMN config type them exactly, with the same upper and lower case (for example ResetCount, not reset or resetc...

    ✓ Konu sahibi tarafından onaylandıTuServerMU · 2018-11-22
  12. Web sitesiany

    DMN CMS 1.2.1 online counter shows 0 even when players are online.

    1. In the DMN server settings use the server name exactly as set in the GameServer config (GameServer.ini or GameServer-Common.ini), not the name from the server list. 2. Save and refresh...

    ✓ Konu sahibi tarafından onaylandıTuServerMU · 2020-10-04
  13. Web sitesiany

    WebEngine 1.2 on cPanel hosting: AdminCP cannot be opened after the install.

    1. First log in on the normal site login page with the game account you set as admin during the install. 2. While logged in, open AdminCP (the AdminCP button appears for that account). 3....

    ✓ Konu sahibi tarafından onaylandıTuServerMU · 2021-01-28
  14. Web sitesiany

    WebEngine 1.2.0 shows a server time that is not in sync with the Windows server time.

    1. Open includes/config/timezone.php. 2. Set the timezone that matches your game server. 3. Save and reload the site.

    ✓ Konu sahibi tarafından onaylandıRaGEZONE · 2019-05-09
  15. Sunucu kurulumuMuEmu / LouisS9, S17

    The open source C# MuEmu project (Yomalex) shows a startup error and the game server does not start.

    1. Copy the Data folder from the repository into the same folder as the MuEmu binary. 2. Make the APIKey in MuEmu Server.xml equal to the apiKey in the CSEmu configuration.xml (example: a...

    ✓ Sorun kaydında onaylandıGitHub (Yomalex/MuEmu) · 2024-09-14
  16. AraçlarIGCNS9

    IGCN Essential Tools (S9 E2 repack) shows an error pop-up as soon as it is opened.

    1. Open SQL Server Configuration Manager > SQL Server Network Configuration > Protocols. 2. Enable Named Pipes and TCP/IP. 3. In TCP/IP properties > IP Addresses set TCP Port 1433 (IPAll)...

    ✓ Konu sahibi tarafından onaylandıRaGEZONE · 2018-06-18
  17. Web sitesiany

    WebEngine CMS on a web host cannot reach the SQL Server on a VPS: 'Could not connect to database (1)', even after opening port 1433 in the firewall and enabling TCP/IP.

    1. Check the usual items first: inbound rule for TCP 1433 in Windows Defender Firewall on the VPS, TCP/IP enabled in SQL Server Configuration Manager. 2. If it still fails, test whether t...

    ✓ Konu sahibi tarafından onaylandıRaGEZONE · 2025-02-12
  18. Web sitesiany

    After the VPS (SQL) IP changed, a WebEngine CMS 1.2.4 site hosted on a separate Linux server shows 'Connection to database failed (MuOnline)' and the installer says the install is already complete.

    1. Open includes/config/webengine.json and set "webengine_cms_installed": false, then upload it. 2. In the web host cPanel open PHP Selector and (re)enable pdo_dblib and pdo_sqlsrv. 3. Ru...

    ✓ Konu sahibi tarafından onaylandıRaGEZONE · 2024-02-16
  19. OynanışMuEmu / LouisS6

    MuEmu S6: NPC Osbourne refuses the combination when making refining stones.

    1. The host had disabled some items in the files, so the NPC could not create the result item. 2. Enable those items again and restart the server. 3. The refining stone rate can then be s...

    ✓ Konu sahibi tarafından onaylandıTuServerMU · 2019-10-23
  20. OynanışMuEmu / LouisS6E3

    Louis S6 Ep3 update 13: events seem broken because the tester can only enter the last level (Devil Square 7, Blood Castle 8).

    1. Not a config bug: a 3rd class character (the GM was 3rd quest, level 400) is always sent to the top level. 2. Test with a lower level 1st or 2nd class character. 3. Kundun must also be...

    ✓ Konu sahibi tarafından onaylandıTuServerMU · 2019-11-08

MuADMINS Community Alpha: ücretsiz, topluluk tarafından yapılıyor, aktif geliştirmede.