Community AlphaAlpha MUADMINS
RUРусский
Войти
На MuADMINSConfig ScannerЗагрузите zip своих файлов: рейты, дропы, споты, лимитыОткрытьНа MuADMINSПрисоединяйтесь к нам в DiscordПросите помощи, показывайте свои проекты и общайтесь о MU с другими владельцами серверов.Открыть

MuADMINS

Решения

Короткие исправления частых проблем серверов, клиентов и сайтов MU Online, каждое с источником и датой. “Подтверждено” означает, что автор вопроса сообщил, что исправление сработало.

Решений: 80 по запросу “connectserver” · Сбросить

  1. ИнструментыДругие файлы

    Launcher auto update (Titan Tech SCF ConnectServer) never downloads the patch from a hosting FTP account

    1. The update FTP is set in the ConnectServer SCF_Config.ini, sections [FtpServerInfo] and [HttpServerInfo] (SCFAddress, SCFPort, SCFID, SCFPASS), with SCFClientVersion and SCFVersionFile...

    ✓ Подтверждено автором темыRaGEZONE · 2015-02-23
  2. Настройка сервера

    How to change the ConnectServer port 44405, and login fails after changing it

    1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...

    ✓ Подтверждено автором темыDarksTeam · 2010-12-21
  3. Настройка сервераДругие файлы0.99b

    On a 0.99b server the ConnectServer closes by itself when I replace the numeric IP with a No-IP hostname. Why?

    1. Old 0.99b ConnectServer builds only accept an address as long as a numeric IP. 2. Keep the hostname at 14 characters or less including the dots (the length of a full IPv4 address strin...

    ✓ Подтверждено автором темыTuServerMU · 2021-02-10
  4. Настройка сервераMuEmu / Louis0.97k

    ConnectServer Cross-Platform (MuEmu kayito): how do I build and run the ConnectServer natively on Linux?

    1. Install the build tools: on Ubuntu or Debian sudo apt install build-essential cmake libboost-all-dev (CentOS: gcc-c++ cmake boost-devel; Arch: base-devel cmake boost). On Windows use V...

    Пересказ источника от MuADMINSNot verifiedGitHub (alisacorporation/ConnectServer) · 2025-11-02
  5. ИнструментыIGCN

    IGC Dashboard: how to configure the client patch (ServerInfo Dashboard section, ConnectServer config.ini, setting.json)

    1. In ServerInfo.xml set the <Dashboard Run="1" ExeName="Dashboard.exe" Path="Dashboard" IsNative="1" LauncherProxyConnectServerID="-1" MainProcessName="main" MemoryShareName="IGCDashBoar...

    Пересказ источника от MuADMINSNot verifiedIGCN · 2024-10-29
  6. Настройка сервераany

    ConnectServer and GameServer drop every few hours with WSASend error 10054 and protocol header errors once many players join.

    1. Check the real player limit of your files: these were built for 250 users, not 1000. 2. Above that number the server falls over. 3. Add a sub server (another GameServer) to spread play...

    ✓ Подтверждено автором темыTuServerMU · 2021-05-30
  7. Настройка сервера

    Two servers (x100 and x10) on two different VPS: the client only shows one of them in the server list

    1. Let one ConnectServer (on VPS 1, the machine that runs the full server) send the server list for both: add both GameServers to its server list with their server code, IP and port. 2. G...

    ✓ Подтверждено автором темыRaGEZONE · 2024-12-10
  8. ИнструментыS6

    MagicHand does not work to edit ServerList.bmd of a Season 6 client

    1. MagicHand is a PHP editor: it does not run by opening its files directly. Put it in the XAMPP htdocs folder, next to your web site files. 2. Start Apache in XAMPP and open the editor f...

    ✓ Подтверждено автором темыRaGEZONE · 2011-05-27
  9. ИнструментыMuEmu / LouisSeason 6

    MainInfo (Louis Emulator S6): how to rename the sub servers and remove the '(Gold)' label with ServerList.bmd and CustomServerName.txt

    1. With Pentium Tools open the client Data/Local/ServerList.bmd: it has 3 entries; give all three the same server name (for example MeuServer). 2. On the server, note the number of each s...

    ✓ Подтверждено автором темыCreandoMU · 2022-10-09
  10. ИнструментыMuEmu / Louis

    ServerList (MuEmu): two sub servers both show as Gold in the server list; how the server code decides Gold or Free

    1. MuEmu splits the server codes in ranges: ServerCode 0 to 8 (servers 1 to 9) show as Gold. 2. ServerCode 9 to 19 (servers 10 to 20) show as Free, with no label; code 19 is the one that...

    ✓ Подтверждено автором темыTUServerMU · 2017-07-26
  11. ИнструментыMuEmu / LouisSeason 4

    Text.bmd: a MuEmu Season 4 client has no ServerList.bmd; where are the server names changed?

    1. Season 4 clients have no ServerList.bmd in Data\Local\Eng, Por or Spn like newer clients. 2. The server names are in Text.bmd inside the client Data\Local folder. 3. Open Text.bmd with...

    ✓ Подтверждено автором темыTUServerMU · 2019-07-06
  12. ИнструментыMuEmu / LouisSeason 6

    ServerList.bmd (MuEmu Season 6): a third server added with MagicHand does not appear in the client list

    1. Editing the current ServerList with MagicHand did not help in this case: the list kept showing only two servers. 2. Take the ServerList file from another client (the asker used a 2012...

    ✓ Подтверждено автором темыTUServerMU · 2021-01-09
  13. Настройка сервераMuEmu / Louis0.97k (update 23)

    Kayito 0.97k update 23: Chinese server names in ServerList.dat show garbled, changing the file encoding does not help.

    1. Update 23 converts the text with IsEncodingAnsi in MemScript.cpp, which broke it. 2. The maintainer corrected it for the next release (update 24), so update to update 24 or later. 3. A...

    ✓ Подтверждено в issueGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2024-08-30
  14. Игровой клиентS6

    How do I change the server name shown in the client server list?

    1. Season 6 clients: the name is in Client\Data\Local\ServerList.bmd. 2. Open it with MagicHand: Files BMD > ServerList > Edit File ServerList.bmd, load your file, edit the name and save....

    ✓ Подтверждено автором темыRaGEZONE · 2012-11-25
  15. Игровой клиентMuEmu / LouisS6

    A local test server does not appear in the client server list (MuEmu S6 E3 files).

    1. Run ipconfig and take the IPv4 address. 2. Put that IPv4 (not 127.0.0.1 and not the sample IP from a guide) in MAIN_INFO and AH_INFO. 3. Regenerate and copy the files into the client....

    ✓ Подтверждено автором темыTuServerMU · 2019-01-25
  16. ИнструментыOpenMU

    MuMain: where is ServerList.bmd, and how do I name the server groups or put a game server into a second group?

    1. The open source client replaced the encrypted Data/Local/ServerList.bmd with Data/Local/ServerList.json, read at start. 2. Each group has an id, a name, an optional description and cha...

    Пересказ источника от MuADMINSNot verifiedGitHub (sven-n/MuMain) · 2026-10-28
  17. Инструменты

    ServerList Editor: how to mark a server as Gold, Gold PVP, Non-PVP or Normal in ServerList.bmd

    1. Install .NET Framework 2.0 (x86 or x64) and open your ServerList.bmd with the editor (English language was added in update 1). 2. The table columns 1 to 15 are the server indexes insid...

    Пересказ источника от MuADMINSNot verifiedRaGEZONE · 2012-02-18
  18. ИнструментыMuEmu / Louis

    MainInfo and Louis files on a local PC: the game cannot connect to 127.0.0.1 (nothing on 127.0.0.1 works on that PC)

    1. Use the network IP of the PC (the LAN address) instead of 127.0.0.1. 2. Put that IP in MapServerInfo.dat, in the ConnectServer configuration and in MainInfo. 3. Common.dat can stay wit...

    ✓ Подтверждено автором темыCreandoMU · 2021-03-26
  19. ИнструментыSeason 4

    Pentium Tools / text.bmd (Season 4 client without serverlist.bmd): how to change the words shown next to each server, for example slow and fast

    1. Searching and editing the words in text.bmd alone did not change the list for the asker. 2. Give the server the code 20 both in the ConnectServer server list and in the ServerInfo file...

    ✓ Подтверждено автором темыTUServerMU · 2017-08-21
  20. Настройка сервераclassic

    How do I show sub servers grouped under one server in the list?

    1. In Connectserverlist.dat the codes are 0, 1, 2... 2. Change them to 0, 21, 41, 61 (steps of 20). 3. The ConnectServer then reads them as rooms of the servers.

    ✓ Подтверждено автором темыImperyus Games Brasil · 2010-12-14

Видео на MUTube

Ещё видео по запросу «connectserver»

Всё ещё не получается? Спросить Помощника MU Поиск в MuGPS

MuADMINS Community Alpha: бесплатно, создаётся сообществом, в активной разработке.