Community AlphaAlpha MUADMINS
RUРусский
Войти
На MuADMINSConfig ScannerЗагрузите zip своих файлов: рейты, дропы, споты, лимитыОткрытьНа MuADMINSПрисоединяйтесь к нам в DiscordПросите помощи, показывайте свои проекты и общайтесь о MU с другими владельцами серверов.Открыть

MuADMINS

Решения

Короткие исправления частых проблем серверов, клиентов и сайтов MU Online, каждое с источником и датой. “Подтверждено” означает, что автор вопроса сообщил, что исправление сработало.

Решений: 17 по запросу “55901” · Сбросить

  1. Настройка сервераS2

    Client disconnects after choosing the server; the client log shows it connecting to someone else's IP (10.0.0.33, port 55901) with Pinkof Season 2 files

    The server files and the client still pointed to the IP of the person who packed them. 1. Put your own IP in the ConnectServer server list config. 2. Put your own IP in the JoinServer con...

    ✓ Подтверждено автором темыDarksTeam · 2015-02-13
  2. Настройка сервера

    With the firewall turned on nobody can enter my server or my website; with it off they can

    The firewall blocks the server ports. 1. In the firewall allow (unblock) TCP 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Also allow port 80 for the website. 3....

    ✓ Подтверждено автором темыDarksTeam · 2012-07-14
  3. Настройка сервераMuEmu / LouisSeason 6

    Legion Team (Rodrigo117) files: GameServerCS shows an error at start while the normal GameServer runs

    The common config of the GameServers was incomplete, so the normal GameServer and GameServerCS tried to use the same (wrong) port. 1. Open the common config file of each GameServer (norma...

    ✓ Подтверждено автором темыTUServerMU · 2020-08-06
  4. Настройка сервераany

    How do I open the MU server ports (44405, 55901, 55919 and others) in Windows Firewall quickly and correctly?

    1. Open PowerShell as administrator on the server. 2. Create one inbound rule for all TCP ports, for example: New-NetFirewallRule -DisplayName "MU Server" -Direction Inbound -Protocol TCP...

    Пересказ источника от MuADMINSNot verifiedMicrosoft Learn · 2025-05-14
  5. Настройка сервераany

    My GameServer (port 55901 and up) sometimes fails to start because the port is already in use. How do I check the Windows dynamic port range?

    1. Since Windows Vista and Server 2008, outgoing connections use local ports 49152 to 65535 by default, which includes 55901, 55960, 55970. 2. Show the range: netsh int ipv4 show dynamicp...

    Пересказ источника от MuADMINSNot verifiedMicrosoft Learn · 2026-02-12
  6. Настройка сервераOpenMUany

    OpenMU worked before, but after the PC ran for a while the game server cannot listen on 55901 or players cannot connect. Why?

    1. Ports 49152 to 65535 are the Windows dynamic range used for outgoing connections, so another process can already hold 55901 and up. 2. Newer OpenMU databases use 45901 to 45906 for gam...

    Пересказ источника от MuADMINSNot verifiedGitHub (MUnique/OpenMU docs) · 2026-10-11
  7. Настройка сервераSeason 18 Episode 2

    Client disconnects right after choosing the server (server on a VPS)

    The server list shows, so the ConnectServer port is open, but the client is dropped when it moves on to the GameServer: the GameServer port is closed somewhere. 1. Find the GameServer por...

    ✓ Подтверждено автором темыTUServerMU · 2023-09-16
  8. ИнструментыOpenMUup to S6

    OpenMU Network Analyzer (MUnique): how to capture and read the packets between a MU client and a game server

    1. The analyzer is a proxy: it listens for the client, connects to the real server and forwards, decrypts and encrypts all traffic so you can read it. 2. Enter the local port it should li...

    Пересказ источника от MuADMINSNot verifiedRaGEZONE · 2018-01-02
  9. Инструменты

    [P4F] Launcher System 0.9.1 (free): how to make it start a main.exe that needs the server IP and port as parameters

    1. The free P4F launcher (Launcher System 0.9.1 by Killbrum, with auto update) works with any MU version; its settings editor saves the configuration in its own format so players cannot r...

    Пересказ источника от MuADMINSNot verifiedDarksTeam · 2021-12-15
  10. ИнструментыS6E3

    P4F Launcher System 2.3 Lite: Run button greyed out, website box empty and error 12029; it only works with the LAN IP

    1. The update server UpdSrv (in the UpdSrv folder of the release) must be configured and running, or the launcher shows no site and no Run button. 2. In UpdSrv set Game File = your main e...

    ✓ Подтверждено автором темыRaGEZONE · 2013-06-03
  11. Настройка сервераS3E1 (1.04H)

    GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)

    The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...

    ✓ Подтверждено автором темыDarksTeam · 2008-06-03
  12. Настройка сервераX-TeamS8

    X-Team MuEmu S8E3: players cannot get in because Mu Hack Protection shows an error, even with the usual ports open.

    1. Open the MHP port 55999 TCP in the firewall and router, besides 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Port 55557 does not need to be opened. 3. Check...

    ✓ Подтверждено автором темыTuServerMU · 2017-04-21
  13. Игровой клиентMuEmu / Louisany

    The client says "You are disconnected from the server" although the IPs, ah.info and main.info look correct. Where should I look?

    1. Check that the basic ports are open: ConnectServer (44405) and GameServer (55901, 55919 for the CS server). 2. Open the client main.info settings again and check every value: IP, port...

    ✓ Подтверждено автором темыTuServerMU · 2019-04-30
  14. Настройка сервераMuEmu / LouisS6

    MuEmu S6 on a VPS: the client works inside the VPS, but from home it shows the antihack logo, says it could not connect and closes.

    1. When it works on the VPS itself but not from outside, the Windows Firewall of the VPS is the usual cause. 2. On the VPS, create inbound TCP allow rules for the ConnectServer port (4440...

    ✓ Подтверждено автором темыTuServerMU · 2018-11-18
  15. Настройка сервераMuEmu / LouisS6

    MuEmu S6 (Louis): the client reaches the server selection, but when I pick the server it disconnects. What is missing?

    1. The ConnectServer port works, but the GameServer port (55901 by default) is blocked. 2. For a local test, add an inbound firewall rule for the GameServer port (or briefly turn off Wind...

    ✓ Подтверждено автором темыTuServerMU · 2018-11-16
  16. Настройка сервераMuEmu / Louis0.97k

    ConnectServer Cross-Platform (MuEmu kayito): how do I build and run the ConnectServer natively on Linux?

    1. Install the build tools: on Ubuntu or Debian sudo apt install build-essential cmake libboost-all-dev (CentOS: gcc-c++ cmake boost-devel; Arch: base-devel cmake boost). On Windows use V...

    Пересказ источника от MuADMINSNot verifiedGitHub (alisacorporation/ConnectServer) · 2025-11-02
  17. Игровой клиентOpenMU

    OpenMU: the client cannot connect when the server and the client run on the same PC

    The original client blocks the address 127.0.0.1. OpenMU documentation: use any 127.x.x.x address except 127.0.0.1. 1. Start OpenMU and check in the admin panel (port 80) that the connect...

    Пересказ источника от MuADMINSNot verifiedOpenMU on GitHub

Видео на MUTube

Ещё видео по запросу «55901»

Всё ещё не получается? Спросить Помощника MU Поиск в MuGPS

MuADMINS Community Alpha: бесплатно, создаётся сообществом, в активной разработке.