MuADMINS
Решения
Короткие исправления частых проблем серверов, клиентов и сайтов MU Online, каждое с источником и датой. “Подтверждено” означает, что автор вопроса сообщил, что исправление сработало.
Решений: 45 по запросу “client ip” · Сбросить
MU Launcher C# (bulgarashi): how do I set the server IP and the auto update in the launcher config.ini?
1. In Launcher/config.ini set ServerVersion: 0 for old versions like 97d, 1 for Season 1 and newer. 2. For old versions set ServerIP-Port=/u127.0.0.1 /p44405 with your IP and port. 3. Upl...
MuMain Launcher: how do I publish a client update so the players' launchers download it?
1. Once: set ManifestUrl, LinuxManifestUrl and LauncherManifestUrl in src/Launcher.Core/LauncherConfig.cs to your patch host (use a domain, not a raw IP) and build the launcher with ./bui...
MuDevs S16: main.exe does not run or show, and starting the game shows many errors
1. Check the server IP in the client config.ini: in this thread a wrong IP there was the whole problem. 2. If it still fails, the reply suggests testing another S16 Lang.mpr in client/dat...
✓ Подтверждено автором темыRaGEZONE · 2022-09-12Yomalex MuEmu (C#): the Season 17 client does not connect to the server. What does the client need?
1. The client must load the MUConnector DLL that comes with the project. Compile it with Visual Studio and the C++ tools in Release mode. 2. The built DLL replaces the main.dll of the cli...
OpenMU: which connect server port should my client use, and why do I get disconnected right after choosing a server?
1. Use port 44405 for the original client and 44406 for the open source client (sven-n/MuMain). 2. A disconnect right after server selection means the address reported by the IP resolver...
OpenMu Client Babylon: how do I install my own OpenMU server with the browser client on a VPS?
1. Use a VPS with Ubuntu 22.04+ or Debian 12+ (or Rocky/Alma 9) with at least 4 GB RAM and 30 GB disk; Windows 10/11 or Server 2022 also works. A domain is optional; with one, players get...
Two servers (x100 and x10) on two different VPS: the client only shows one of them in the server list
1. Let one ConnectServer (on VPS 1, the machine that runs the full server) send the server list for both: add both GameServers to its server list with their server code, IP and port. 2. G...
✓ Подтверждено автором темыRaGEZONE · 2024-12-10P4F Launcher System 2.3 Lite: Run button greyed out, website box empty and error 12029; it only works with the LAN IP
1. The update server UpdSrv (in the UpdSrv folder of the release) must be configured and running, or the launcher shows no site and no Run button. 2. In UpdSrv set Game File = your main e...
✓ Подтверждено автором темыRaGEZONE · 2013-06-03Real MU Launcher (open source): "no connection to the server" and then it does not update the client
1. ServerURL must be a web address, not a folder on your PC: http://YOUR_WEB_IP_OR_DNS/path_to_update_folder/. A web server is needed (on a VPS or locally on your PC). 2. In Globals.cs se...
✓ Подтверждено автором темыRaGEZONE · 2024-12-29IGCN S9 E2 repack: IGC tools do not run and the client disconnects with 127.0.0.1 in the configs
1. Do not use 127.0.0.1 in the server IP settings of this repack. 2. Open CMD, run ipconfig and take your IPv4 address. 3. Put that IPv4 address in every server IP setting (and in the cli...
✓ Подтверждено автором темыRaGEZONE · 2019-06-11MuEmu S6 on a VPS: the client works inside the VPS, but from home it shows the antihack logo, says it could not connect and closes.
1. When it works on the VPS itself but not from outside, the Windows Firewall of the VPS is the usual cause. 2. On the VPS, create inbound TCP allow rules for the ConnectServer port (4440...
✓ Подтверждено автором темыTuServerMU · 2018-11-18OpenMU in Docker on Windows: the client sees the server list but is disconnected when joining a server.
1. Use the client version the server targets (1.04d English, Season 6 E3). 2. Open the ports in the Windows firewall (and allow NAT edge traversal). 3. The connect server hands out the IP...
✓ Подтверждено в issueGitHub (MUnique/OpenMU) · 2019-11-12The server shows online but the login box never appears; after a few seconds the client disconnects (Louis S6 Premium Update 13).
1. In MAIN_INFO MainInfo.ini use the same CustomerName, Version and Serial as GameServer and GameServerCS (Data/GameServerInfo - Common.dat), plus your server IP. 2. Generate; main.premiu...
✓ Подтверждено автором темыTuServerMU · 2019-09-08OpenMU Network Analyzer (MUnique): how to capture and read the packets between a MU client and a game server
1. The analyzer is a proxy: it listens for the client, connects to the real server and forwards, decrypts and encrypts all traffic so you can read it. 2. Enter the local port it should li...
MagicHand 2.0 BETA: how to run it and convert client BMD files for the server (archivos/txt folder)
1. MagicHand is a web editor written in PHP5, not a desktop program: install AppServ or XAMPP and open it in any browser except Internet Explorer. 2. It edits the client BMD files (from B...
MuMain: how do I build the open source client on Windows x64 and point it at my own server?
1. Install CMake 3.25 or newer, the Visual Studio C++ build tools, the .NET 10 SDK and vcpkg, and set VCPKG_ROOT. 2. In a Visual Studio Developer PowerShell, from the repository root, run...
MainInfo and Louis files on a local PC: the game cannot connect to 127.0.0.1 (nothing on 127.0.0.1 works on that PC)
1. Use the network IP of the PC (the LAN address) instead of 127.0.0.1. 2. Put that IP in MapServerInfo.dat, in the ConnectServer configuration and in MainInfo. 3. Common.dat can stay wit...
✓ Подтверждено автором темыCreandoMU · 2021-03-26Friends can join my MuEmu S6 server from outside, but I cannot connect from another PC in the same LAN as the server. Which port is missing?
1. It is usually not a port: many routers do not let LAN PCs reach their own public IP (no NAT loopback). 2. Use a No-IP hostname as the server address in the ConnectServer server list, m...
✓ Подтверждено автором темыTuServerMU · 2020-07-14Server on my home PC works for me with the IPv4 address, but friends get disconnected even with ports added to firewall and router. What is wrong?
1. A private (LAN) address like 192.168.x.x only works inside your own network. 2. For outside players, put your public IP (or a No-IP hostname) in the server side IP settings (ConnectSer...
✓ Подтверждено автором темыTuServerMU · 2019-05-03MHP antihack says 'Client is locked' after a debugger (Visual Studio) was attached to the client once (MuEmu).
Open MuServer/MHPServer/BlackList.txt and remove the blocked IP, then try again.
✓ Подтверждено автором темыTuServerMU · 2019-05-30