MuADMINS
Soluții
Rezolvări scurte pentru probleme frecvente ale serverelor, clienților și site-urilor MU Online, fiecare cu sursa și data ei. “Confirmată” înseamnă că persoana care a întrebat a spus că rezolvarea a funcționat.
Soluții: 108 pentru “serverlist” · Șterge
After about one hour of uptime nobody can log in: the login just keeps loading
1. Set the server startup tool to reload (restart) the ConnectServer at an interval; the answer says this is done on all versions. 2. Restart the servers.
✓ Confirmată de autorul topiculuiDarksTeam · 2009-04-29GameServer starts normally but crashes after a few minutes
1. First read the GameServer logs: a broken event (Blood Castle, Devil Square) can stop the GS. 2. In this case the events and the GameServer were fine: the culprit was the ConnectServer....
✓ Confirmată de autorul topiculuiDarksTeam · 2011-05-11Client disconnects after choosing the server; the client log shows it connecting to someone else's IP (10.0.0.33, port 55901) with Pinkof Season 2 files
The server files and the client still pointed to the IP of the person who packed them. 1. Put your own IP in the ConnectServer server list config. 2. Put your own IP in the JoinServer con...
✓ Confirmată de autorul topiculuiDarksTeam · 2015-02-13Player HP bars show over everyone's head, not only in party; how to hide them
1. Open GameServer\Data\GameServerInfo - Common and find the Health Bar section. 2. Set UserHealthBarSwitch = 0 to hide the HP bar of players (MonsterHealthBarSwitch is the same switch fo...
✓ Confirmată de autorul topiculuiTUServerMU · 2021-05-17MuEmu S6: Jewel of Life will not add more than +12, as if that were the limit
The limit is the MaxItemOption setting, not the Jewel of Life success rate. 1. Open MuServer\GameServer\Data\GameServerInfo - Common.txt and find the Common Settings block. 2. MaxItemOpti...
✓ Confirmată de autorul topiculuiTUServerMU · 2020-10-15MuEmu S6: how to set how many stat points a character gets on each /reset (wanted 500 points per reset)
The points per reset are set in the reset command block of the GameServer command file, not in Common. 1. Open MuServer\GameServer\DATA\GameServerInfo - Command.txt and find the Reset Com...
✓ Confirmată de autorul topiculuiTUServerMU · 2016-11-13MuEmu S6 with a normal and a VIP server: going from the VIP server to a GameServerCS map and back sends the player to the normal server
The return server for each map is set in MapServerInfo, and it has to be set in both servers. 1. Open Data\MapServerInfo (MapServerMove section: ServerCode NotMoveOption NextMap NextServe...
✓ Confirmată de autorul topiculuiTUServerMU · 2020-09-25X-Team Season 15 files (update 5): GameServer shows a message that something 'does not exist' and will not start
The error is about the server code and the GameServer common file of the update. 1. Check the ServerCode is the same in ConnectServer\ConnectServer.txt, Data\MapServerInfo and the GameSer...
✓ Confirmată de autorul topiculuiTUServerMU · 2020-08-15MuEmu source: how to make the quit / switch character / switch server countdown length configurable
The topic starter posted this fix (credited to Emershow): 1. ServerInfo.cpp: below SetItemAcceptHarmonySwitch add this->m_CharacterCloseCount = GetPrivateProfileInt(section,"CharacterClos...
✓ Confirmată de autorul topiculuiRaGEZONE · 2023-10-31How do I make the /post command work on both GameServer and GameServer CS?
1. Open GameServerInfo - Command.dat of each GameServer (normal and CS). 2. In the Post Command Settings set CommandPostSwitch = 1 and enable it for the account levels you want (CommandPo...
✓ Confirmată de autorul topiculuiRaGEZONE · 2017-04-24The server select screen shows my server as 'Name-12'; how do I make it show 1?
1. The number after the name is the GameServer code plus 1: code 11 in the ConnectServer server list shows as 12 in the client. That is normal. 2. Change the server code to 0 in the Conne...
✓ Confirmată de autorul topiculuiRaGEZONE · 2018-02-01MGTEAM Season XI files: 'New version of the game is required' and I do not know where to change version and serial
1. The client version and serial must match the GameServer exactly. 2. In these files the server side values are in GameServer\Data\GameServerInfo - Common.dat. 3. Put the version and ser...
✓ Confirmată de autorul topiculuiRaGEZONE · 2017-09-17IGCN S9 E2 repack: 'No active Game Servers found' and disconnect when the server settings use a DDNS hostname
1. Put the real (numeric) IP address in the GameServer and server list settings instead of the DDNS hostname. 2. Restart the ConnectServer and GameServer and connect again. 3. If you must...
✓ Confirmată de autorul topiculuiRaGEZONE · 2018-12-29MuEmu S12: Crywolf and Valley of Loren ended up on server 1 instead of server 20 and their NPCs do not respond
1. Which GameServer hosts which maps is set in MapServerInfo; an entry there moved these maps to the wrong server. 2. Open MapServerInfo and put Crywolf and Valley of Loren back on the Ga...
✓ Confirmată de autorul topiculuiRaGEZONE · 2018-10-11MuEmu 0.97k (kayito): how do I make a second server show up in its own box ("Server 2") on the server selection screen?
1. The selection screen groups GameServers by ServerCode, 20 codes per box. 2. ServerCode 0 to 19 appear under Server 1, 20 to 39 under Server 2, 40 to 59 under Server 3, and so on. 3. Gi...
✓ Confirmată în raportul problemeiGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2024-12-04MuEmu S6 (Louis): the client reaches the server selection, but when I pick the server it disconnects. What is missing?
1. The ConnectServer port works, but the GameServer port (55901 by default) is blocked. 2. For a local test, add an inbound firewall rule for the GameServer port (or briefly turn off Wind...
✓ Confirmată de autorul topiculuiTuServerMU · 2018-11-16IGCN Season 12: the server runs, but after loading the client says the game needs to be updated.
1. Open IGCData/IGC_MapServerInfo.xml on the server and read the client version and serial. 2. Put the same IP, version and serial in the client info editor (serverinfo generator). 3. Gen...
✓ Confirmată de autorul topiculuiTuServerMU · 2019-04-06How to disable the guild warehouse (Royal Guard Captain NPC) on MuEmu S6 files.
1. Open MuServer/GameServer/Data/GameServerInfo - Custom.txt. 2. In the Custom Guild Warehouse block set GuildWarehouseEnable = 0. 3. GuildWarehouseStatus sets who may use it when enabled...
✓ Confirmată de autorul topiculuiTuServerMU · 2020-09-07MSVCP100.DLL is missing when starting ConnectServer, DataServer or JoinServer (MuEmu S6 files).
Install the Microsoft Visual C++ 2010 Redistributable (x86, plus x64 on 64 bit Windows). Prefer the Microsoft download over single DLL sites.
✓ Confirmată de autorul topiculuiTuServerMU · 2018-06-11Client disconnects right after choosing the server (server on a VPS)
The server list shows, so the ConnectServer port is open, but the client is dropped when it moves on to the GameServer: the GameServer port is closed somewhere. 1. Find the GameServer por...
✓ Confirmată de autorul topiculuiTUServerMU · 2023-09-16