Community AlphaAlpha MUADMINS
RORomână
Autentificare
Pe MuADMINSConfig ScannerÎncarcă zip-ul fișierelor tale: rate-uri, drop-uri, spoturi, limiteDeschidePe MuADMINSÎntâlnește-ne pe DiscordCere ajutor, arată la ce lucrezi și vorbește despre MU cu alți proprietari de servere.Deschide

MuADMINS

Soluții

Rezolvări scurte pentru probleme frecvente ale serverelor, clienților și site-urilor MU Online, fiecare cu sursa și data ei. “Confirmată” înseamnă că persoana care a întrebat a spus că rezolvarea a funcționat.

Soluții: 203 pentru “gameserver” · Șterge

  1. Configurarea serveruluiIGCNS9

    IGCN S9 E2 repack: 'No active Game Servers found' and disconnect when the server settings use a DDNS hostname

    1. Put the real (numeric) IP address in the GameServer and server list settings instead of the DDNS hostname. 2. Restart the ConnectServer and GameServer and connect again. 3. If you must...

    ✓ Confirmată de autorul topiculuiRaGEZONE · 2018-12-29
  2. Configurarea serveruluiMuEmu / LouisS6

    Louis S6 Up13 GameServer window never opens, shows an error and fills the folder with .dmp files after editing configs.

    1. Restore the original Data folder; if the server starts, the bad file is in there. 2. Put your edited files back one by one, starting with the ones you changed, until it fails again. 3....

    ✓ Confirmată de autorul topiculuiTuServerMU · 2021-10-11
  3. Configurarea serveruluiany

    GameServer, DataServer or JoinServer will not start: MSVCR100.dll, MSVCP120.dll or VCRUNTIME140.dll is missing. Which runtime do I install?

    1. The number in the DLL name tells the Visual C++ version: 80 = 2005, 90 = 2008, 100 = 2010, 110 = 2012, 120 = 2013, 140 = 2015 to 2026. 2. Download the matching Visual C++ Redistributab...

    Rescriere MuADMINS a surseiNot verifiedMicrosoft Learn · 2025-12-03
  4. Configurarea serveruluiany

    My GameServer (port 55901 and up) sometimes fails to start because the port is already in use. How do I check the Windows dynamic port range?

    1. Since Windows Vista and Server 2008, outgoing connections use local ports 49152 to 65535 by default, which includes 55901, 55960, 55970. 2. Show the range: netsh int ipv4 show dynamicp...

    Rescriere MuADMINS a surseiNot verifiedMicrosoft Learn · 2026-02-12
  5. Configurarea serveruluiS3E1 (1.04H)

    GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)

    The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...

    ✓ Confirmată de autorul topiculuiDarksTeam · 2008-06-03
  6. Configurarea serverului

    Where to change the maximum number of users online (the GameServer shows 6500)

    1. Open the server's Data\commonserver.cfg. 2. Find NumberOfMaxUser and set the value you want. 3. Restart the GameServer.

    ✓ Confirmată de autorul topiculuiDarksTeam · 2009-01-18
  7. Configurarea serverului97d+99i

    "error-L1 : CloseClient INVALID_SOCKET": after some time online the GameServer disconnects all players (97d+99i, after moving from Windows Server 2003 to Windows Server 2012 R2)

    Reinstalling Windows, all updates and compatibility modes did not help; the fix was the newer DLL for the files. 1. Download the newer DLL that the developer uploaded for these 97d+99i fi...

    ✓ Confirmată de autorul topiculuiDarksTeam · 2017-02-14
  8. Configurarea serverului0.97d (97d+99i)

    GameServer 0.97 (DarksTeam 97d Beta 41) disconnects Dark Wizard / Soul Master with [ClientHack Detected : Editing AttackSpeed]

    The characters wear items that need more Strength or Agility than they have, so the attack speed check fires. 1. Either give the characters the stat points the items require, or 2. Open D...

    ✓ Confirmată de autorul topiculuiDarksTeam · 2018-12-29
  9. Gameplay97d+99i

    GameServer crashes when a Box of Kundun +1 drops (DarksTeam 97d+99i), with no line in the log

    The box drop list (EventItemBag8 for Box of Kundun +1) had only non excellent items, which crashes the GS. 1. Open the EventItemBag file of that box. 2. Use the 97d column order: group, i...

    ✓ Confirmată de autorul topiculuiDarksTeam · 2022-01-06
  10. Gameplay

    Players are disconnected inside Blood Castle; the GameServer log shows 'create monster fail - wrong map [173]'

    1. The Blood Castle monsters in the monster spawn XML were edited and some entries point to map code 173, which does not exist, so spawning them fails and players are dropped. 2. Revert e...

    ✓ Confirmată de autorul topiculuiRaGEZONE · 2024-02-14
  11. Configurarea serveruluiOpenMUany

    OpenMU in Docker: game servers keep reporting my public IP to the client and -resolveIP / RESOLVE_IP seem ignored. How do I set loopback or local?

    1. Open the admin panel and go to the game configuration, System section. 2. Change the IP Resolving setting (Public by default) to Loopback for same machine tests, Local for a LAN, or Cu...

    ✓ Confirmată în raportul problemeiGitHub (MUnique/OpenMU) · 2026-02-13
  12. Configurarea serveruluiMuEmu / LouisS6

    KoshGames S6.3 files (MuEmu base): any small edit to InvasionManager makes the GameServers fail as if the file were broken.

    1. Windows Notepad was corrupting the file when saving. 2. Edit the config with Notepad++ or Sublime Text, keeping the original encoding. 3. Save and restart the GameServers.

    ✓ Confirmată de autorul topiculuiTuServerMU · 2021-02-06
  13. GameplayAlte fișiere

    Where are the Chaos Machine success rates for +10 to +15 item upgrades on Titan GameServer files?

    1. Open scfdata\items\scf_chaosmachine.txt (not scf_items.cfg). 2. Edit the [PlusItemMix] section: SCFCBmixStart10 to SCFCBmixStart15 set the base rate per level and SCFCBmixLuckAddPercen...

    ✓ Confirmată de autorul topiculuiRaGEZONE · 2016-03-21
  14. Client de jocIGCNS9

    Antihack kicks the player on connect; the GameServer log says 'Invalid Game-Client files' with a SkillCRC mismatch (IGCN Season 9 E2).

    1. Read the log line: SkillCRC shows two values (received / expected). 2. In GameServer Data/Common.ini set SkillCRC to the value your client sends (here 0xBA40895A instead of 0x6D203B2D)...

    ✓ Confirmată de autorul topiculuiRaGEZONE · 2023-11-26
  15. InstrumenteOpenMUup to S6

    OpenMU Network Analyzer (MUnique): how to capture and read the packets between a MU client and a game server

    1. The analyzer is a proxy: it listens for the client, connects to the real server and forwards, decrypts and encrypts all traffic so you can read it. 2. Enter the local port it should li...

    Rescriere MuADMINS a surseiNot verifiedRaGEZONE · 2018-01-02
  16. Configurarea serveruluiIGCN

    IGCN License Manager: what the GameServer license errors mean (Cannot connect to Auth Server, Time Check Failed, IP Address or HWID not found, Activation Time is over)

    1. Cannot connect to Auth Server (first connect) or Failed to connect to any of auth servers (reconnect): check that the subscription is active, that the IPs in the license data on the Li...

    Rescriere MuADMINS a surseiNot verifiedIGCN · 2022-03-28
  17. InstrumenteOpenMU

    MuMain: where is ServerList.bmd, and how do I name the server groups or put a game server into a second group?

    1. The open source client replaced the encrypted Data/Local/ServerList.bmd with Data/Local/ServerList.json, read at start. 2. Each group has an id, a name, an optional description and cha...

    Rescriere MuADMINS a surseiNot verifiedGitHub (sven-n/MuMain) · 2026-10-28
  18. InstrumenteOpenMU

    OpenMU admin panel: how do I switch off a game feature, or run an event like Blood Castle or an invasion only on some game servers?

    1. Open Configuration, Plugins (/plugins) and filter by extension point, name or type. 2. Deactivate turns a plugin off, Activate turns it on again. Many plugins are core mechanics (packe...

    Rescriere MuADMINS a surseiNot verifiedGitHub (MUnique/OpenMU) · 2026-10-18
  19. InstrumenteOpenMU

    OpenMU admin panel: how do I change the experience rate for all servers or only for one game server?

    1. Go to Configuration, General and change Experience rate (and Master experience rate if you want). 2. Save. 3. Click Reload configuration and restart all game servers on the Servers pag...

    Rescriere MuADMINS a surseiNot verifiedGitHub (MUnique/OpenMU) · 2026-09-28
  20. InstrumenteWebZen 97d / 99b

    Main CheckSum.dat Generator (Deathway): where the CheckSum.dat goes on the server and what the GameServer needs

    1. Open your main.exe in the generator and click Generate. It is very slow: wait some minutes until it writes CheckSum.dat. 2. Put the file in the server lang folder of the language set i...

    Rescriere MuADMINS a surseiNot verifiedRaGEZONE · 2008-06-29

MuADMINS Community Alpha: gratuit, făcut de comunitate, în dezvoltare activă.