MuADMINS
Soluções
Correções curtas para problemas comuns de servidor, cliente e site de MU Online, cada uma com a fonte e a data. “Confirmado” significa que quem perguntou disse que a correção funcionou.
26 soluções para “movereq(kor).txt” · Limpar
97d item hex: how to read the item type (group) and index from the hex code, as listed in item(kor).txt
1. Take the first hex character as the type and the second as the index, and the 8th byte (hex characters 15 and 16) as the extra byte. 2. If the type is odd, add 16 to the index and subt...
✓ Confirmado pelo autor do tópicoDarksTeam · 2018-09-28MuEmu S6E3: after editing movereq_eng.bmd the M window lists the right maps but then breaks, although Move.txt matches
1. The problem was the editor: MagicHand (and Pentium Tools) saved a damaged movereq_eng.bmd for this client. 2. Edit the file again with MU ToolKit Silver Edition and save it. 3. Keep th...
✓ Confirmado pelo autor do tópicoRaGEZONE · 2018-02-20Loch's Feather almost never drops (old GameServer with items(kor).txt), even though it is set as droppable
1. The feather only drops naturally in Icarus and very rarely; the item line in items(kor).txt does not set its rate. 2. Add a custom line for it in itemdroprate.txt, as in the topic: 13...
✓ Confirmado pelo autor do tópicoRaGEZONE · 2016-04-25ENC MuOnline DB Editor (ENCGames): first setup, and why it cannot open item(kor).txt
1. Start the .exe and point it to your server item(kor).txt: the editor builds its item list from that file, so custom items show up too. 2. Wait while it loads the items, then fill in yo...
BMDdecoder: how to decode a client .bmd (text.bmd, item.bmd, movereq.bmd) to .txt and encode it back from the command line
1. Copy the tool to a short folder, for example C:\b\bmddecoder.exe, and put the .bmd you want to edit in the same folder. 2. Open CMD and go to that folder (cd \ then cd b). 3. Decode: b...
Bmd to Txt Converter (IAT Group): how to turn the client Item.bmd into an Item(kor).txt style file and encode or decode Text.bmd
1. Copy the client Item.bmd into the same folder as the converter. 2. Run the converter on Item.bmd: it writes an Items.txt laid out so it can be used directly as the server Item(kor).txt...
PBSoft ItemToCashShop 1.0: how to build CashShopList.txt from the server Item(kor).txt (Season 2 or Season 4)
1. Open the program and use Arquivo > Carregar Item.txt to load your server item file. 2. In each category tab (Sword, Axes, Scepter, Spears, Staff, Shield and so on) set the Initial and...
MoveReq.bmd: a map (Barracks) added at the bottom of the M list does not show in game (ENC Season 6)
1. The client does not read new rows added to the end of movereq.bmd, and a movereq.bmd from other files can show as jumbled ASCII characters in a different client. 2. Instead of adding a...
✓ Confirmado pelo autor do tópicoRaGEZONE · 2011-05-14MagicHand: the M (move) window sends players to the wrong maps (Devias goes to Kanturu ...) with TitanTech 11.70.28 and a S6E3 client
1. The client move list and the server move list do not match. The client reads Client/Data/Local/Eng/movereq_eng.bmd (not only movereq.bmd); the server reads MuServer/Data/lang/kor/MoveR...
✓ Confirmado pelo autor do tópicoRaGEZONE · 2013-04-22Pentium Tools: maps removed from move.txt still show in the warp (M) window (Flawless Emu S6)
1. The warp window list comes from the client MoveReq.bmd, not from the server move file. 2. Open MoveReq.bmd with Pentium Tools (or MU S@nek Tools) and delete the row of the map; if the...
✓ Confirmado pelo autor do tópicoRaGEZONE · 2024-10-27ImportToEmu: editing a movereq.bmd that no other editor opens (MagicHand shows it blank) to change the level required per map
1. On the server side the level per map is the MinLevel column of MuServer\Data\Move\Move.txt. 2. For the client file use ImportToEmu by Natzugen (TUServerMU topic 14368): it opens movere...
✓ Confirmado pelo autor do tópicoTUServerMU · 2018-06-24Flawless Emulator S6: maps removed from Data/Move/Move.txt still show in the warp command window (they just do not teleport).
1. The warp window list comes from the client file MoveReq.bmd, not only the server Move.txt. 2. Open the client Data/Local MoveReq.bmd in a BMD editor and delete the map rows (or set the...
✓ Confirmado pelo autor do tópicoRaGEZONE · 2024-10-28The M warp window shows unreadable names even though movereq.txt, movereq.bmd and gate files match (Avatar MU Season 5 files).
Download the fixed Movereq.bmd from the files guide and replace the one in the client.
✓ Confirmado pelo autor do tópicoRaGEZONE · 2011-07-12Move.txt level requirements were changed but the M (move) window still shows the old levels.
1. The client keeps its own copy in movereq bmd files per language in Data/Local (eng, spn, por). 2. Edit every language version to match Move.txt (ZFileManager worked; MagicHand did not...
✓ Confirmado pelo autor do tópicoTuServerMU · 2020-08-02zFileManager 1.0.2.0: which zTeam Season 8 client files it converts to txt or xml and edits
1. zFileManager (beta, by LockMU) supports the zTeam Season 8 Episode 2 files and converts client files to .txt or .xml in the zTeam format, with a built in editor and fast find and repla...
MagicHand 2.0 BETA: how to run it and convert client BMD files for the server (archivos/txt folder)
1. MagicHand is a web editor written in PHP5, not a desktop program: install AppServ or XAMPP and open it in any browser except Internet Explorer. 2. It edits the client BMD files (from B...
Pentium Tools 1.06: which client files it edits and converts (Text, Gate, MoveReq, OZJ/OZT, bmd to smd)
1. Table editors for Text.bmd (also Unicode TextW.bmd), Gate.bmd and MoveReq.bmd from Season 1 to Season 4 clients, with find, replace, filter, sort, undo and a compare mode that highligh...
MuEditor 2.1 (0.97 / 0.99 versions): how to get the item id the editor needs (Blood Castle entry 13 18 shows as B2)
1. Take the item type and index from item(kor).txt, for example 13 18. 2. In these versions each type has 32 items, so the number is type x 32 + index: 13 x 32 + 18 = 434. 3. Convert it t...
✓ Confirmado pelo autor do tópicoTUServerMU · 2020-06-26Custom items vanish when entering the Castle Siege map.
1. The GS-CS Data folder had an older item(kor).txt without the new items. 2. Copy the same item file into the Data folder of every GameServer, GS-CS and sub servers. 3. Restart.
✓ Confirmado pelo autor do tópicoImperyus Games Brasil · 2011-10-24Moving to Lorencia with M lands on the wrong coordinates (inside the castle area).
1. Find the gate number of that move in the client movereq. 2. Edit its coordinates in the server Gate.txt (and Gate.bmd in the client if needed). 3. The asker only needed to change the c...
✓ Confirmado pelo autor do tópicoImperyus Games Brasil · 2010-05-26