Community AlphaAlpha MUADMINS
PTPortuguês (Brasil)
Entrar
No MuADMINSConfig ScannerEnvie o zip dos seus arquivos: rates, drops, spots, limitesAbrirNo MuADMINSEncontre-nos no DiscordPeça ajuda, mostre o que está criando e converse sobre MU com outros donos de servidores.Abrir

MuADMINS

Soluções

Correções curtas para problemas comuns de servidor, cliente e site de MU Online, cada uma com a fonte e a data. “Confirmado” significa que quem perguntou disse que a correção funcionou.

15 soluções para “mapserverinfo” · Limpar

  1. Configuração do servidorany

    Two servers on one VPS: after creating a character (Summoner, Elbeland) the player is sent to the wrong server code from MapServerInfo

    With subservers the main MapServerInfo must know every GameServer. 1. Open the main Data\MapServerInfo. 2. Add the index (server code) lines of every GameServer and every GameServerCS you...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2021-02-21
  2. Configuração do servidor

    Two servers (x100 and x10) on two different VPS: the client only shows one of them in the server list

    1. Let one ConnectServer (on VPS 1, the machine that runs the full server) send the server list for both: add both GameServers to its server list with their server code, IP and port. 2. G...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2024-12-10
  3. FerramentasMuEmu / Louis

    MainInfo and Louis files on a local PC: the game cannot connect to 127.0.0.1 (nothing on 127.0.0.1 works on that PC)

    1. Use the network IP of the PC (the LAN address) instead of 127.0.0.1. 2. Put that IP in MapServerInfo.dat, in the ConnectServer configuration and in MainInfo. 3. Common.dat can stay wit...

    ✓ Confirmado pelo autor do tópicoCreandoMU · 2021-03-26
  4. Configuração do servidorMuEmu / LouisSeason 6

    MuEmu S6 with a normal and a VIP server: going from the VIP server to a GameServerCS map and back sends the player to the normal server

    The return server for each map is set in MapServerInfo, and it has to be set in both servers. 1. Open Data\MapServerInfo (MapServerMove section: ServerCode NotMoveOption NextMap NextServe...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2020-09-25
  5. Configuração do servidorX-TeamSeason 15

    X-Team Season 15 files (update 5): GameServer shows a message that something 'does not exist' and will not start

    The error is about the server code and the GameServer common file of the update. 1. Check the ServerCode is the same in ConnectServer\ConnectServer.txt, Data\MapServerInfo and the GameSer...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2020-08-15
  6. Cliente do jogo

    The server select screen shows my server as 'Name-12'; how do I make it show 1?

    1. The number after the name is the GameServer code plus 1: code 11 in the ConnectServer server list shows as 12 in the client. That is normal. 2. Change the server code to 0 in the Conne...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2018-02-01
  7. Configuração do servidorS2

    Season 2 files (KarLi tutorial): everything starts except GameServerCS, which fails

    1. Use your LAN address (192.168.x.x) only in MapServerInfo.dat and in the ConnectServer ServerList.dat. 2. Everywhere else in the server configs and the startup put 127.0.0.1. 3. In main...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2018-10-25
  8. Configuração do servidorMuEmu / LouisS12

    MuEmu S12: Crywolf and Valley of Loren ended up on server 1 instead of server 20 and their NPCs do not respond

    1. Which GameServer hosts which maps is set in MapServerInfo; an entry there moved these maps to the wrong server. 2. Open MapServerInfo and put Crywolf and Valley of Loren back on the Ga...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2018-10-11
  9. Cliente do jogoMuEmu / LouisS6

    'You are disconnected from the server' when selecting the server, after the IP was changed in many config files (MuEmu files).

    1. Put your IP only in ConnectServer/ServerList.dat and GameServer Data/MapServerInfo.dat. 2. Leave every other IP entry at 127.0.0.1. 3. If you use the antihack, open its port 55999. 4....

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2021-02-20
  10. FerramentasMuEmu / LouisSeason 6

    MainInfo (Louis Emulator S6): how to rename the sub servers and remove the '(Gold)' label with ServerList.bmd and CustomServerName.txt

    1. With Pentium Tools open the client Data/Local/ServerList.bmd: it has 3 entries; give all three the same server name (for example MeuServer). 2. On the server, note the number of each s...

    ✓ Confirmado pelo autor do tópicoCreandoMU · 2022-10-09
  11. Configuração do servidorclassic (MMT)

    New sub server (MMT files) gives a bind error and restarts.

    1. The sub server used the same port as the main one. 2. Give it its own port (for example 55903) and open it in the firewall. 3. Change its ServerCode in ServerList and MapServerInfo and...

    ✓ Confirmado pelo autor do tópicoImperyus Games Brasil · 2009-10-30
  12. Configuração do servidorMuEmu / LouisSeason 6

    Legion Team (Rodrigo117) files: GameServerCS shows an error at start while the normal GameServer runs

    The common config of the GameServers was incomplete, so the normal GameServer and GameServerCS tried to use the same (wrong) port. 1. Open the common config file of each GameServer (norma...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2020-08-06
  13. Configuração do servidorMuEmu / LouisS8

    Two MuEmu S8 servers on one machine: the first works, the second disconnects at login although its ports (55902, 55920, 55961, 55971) are forwarded.

    1. Open the router page and check that the forwarding rules for the second server ports are really enabled, not only created. 2. If a rule turns itself off again after a refresh, delete i...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2020-06-17
  14. Cliente do jogoIGCNS12

    IGCN Season 12: the server runs, but after loading the client says the game needs to be updated.

    1. Open IGCData/IGC_MapServerInfo.xml on the server and read the client version and serial. 2. Put the same IP, version and serial in the client info editor (serverinfo generator). 3. Gen...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2019-04-06
  15. Configuração do servidor

    JoinServer and DataServer cannot connect to the database although the backup is restored

    These files had the database name MuOnlineS6 in the server configs while the database was restored as MuOnline, so the servers looked for a database that does not exist. 1. In SQL Server...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2018-09-27
Ainda com problema? Pergunte ao Assistente MU Buscar no MuGPS Buscar no MUTube

MuADMINS Community Alpha: grátis, feito pela comunidade e em desenvolvimento ativo.