Community AlphaAlpha MUADMINS
PTPortuguês (Brasil)
Entrar
No MuADMINSConfig ScannerEnvie o zip dos seus arquivos: rates, drops, spots, limitesAbrirNo MuADMINSEncontre-nos no DiscordPeça ajuda, mostre o que está criando e converse sobre MU com outros donos de servidores.Abrir

MuADMINS

Soluções

Correções curtas para problemas comuns de servidor, cliente e site de MU Online, cada uma com a fonte e a data. “Confirmado” significa que quem perguntou disse que a correção funcionou.

83 soluções para “login” · Limpar

  1. Ferramentas

    MuMaker: "Cannot open database "MuOnline" requested by the login. The login failed" on SQL Server 2005 Express

    1. Enable the sa login: Management Studio > Security > Logins > sa > Properties: untick "Enforce password policy", set a password; on the Status page tick Grant and Enabled. 2. Server Pro...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2012-08-18
  2. Ferramentas

    MuMaker: "Login failed for user 'sa'" although the server runs and the password is right (only one MuMaker build works)

    1. Check that the sa login has rights on the MU databases and that the password in the MuMaker Config.ini is right. 2. If it still says login failed, the MuMaker build does not fit your s...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2011-06-30
  3. Ferramentas

    MuMaker: "Login failed for user 'sa'. Reason: Not associated with a trusted SQL Server connection."

    1. The error means SQL Server only accepts Windows logins, so the sa login that MuMaker uses is refused. 2. Change the SQL Server authentication to SQL Server and Windows Authentication m...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2008-01-29
  4. Configuração do servidor

    Anyone can log in with a random account name and password, and the login creates that account in SQL

    1. This is not a database bug: the server has automatic account registration switched on, so an unknown login is created on the spot. 2. Open the JoinServer config (in some files the opti...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2021-04-15
  5. Configuração do servidorIGCNS9

    IGCN S9 E2 repack: DataServer says 'Login failed for user ...' (SQLSTATE 28000) and 'DATA SERVER CANNOT CONNECT TO MSSQL'

    1. The repack DataServer config came with a SQL login that does not exist on your SQL Server (here a random name like D2a78Rtko0), so the login fails. 2. Open the database settings of the...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2019-07-14
  6. FerramentasS2

    Pentium Tools: how to convert JPG to OZJ and TGA to OZT (a new login_back.ozt shows a white square)

    1. In Pentium Tools open the graphic (OZJ / OZT) converter, tick the img > mu option at the bottom and double click your image. 2. A .jpg becomes .OZJ and a .tga becomes .OZT; other forma...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2014-10-12
  7. Configuração do servidorOpenMUSeason 6 (OpenMU 0.8.x)

    OpenMU (Docker all-in-one) after updating the server: the client stays on the login screen after entering the password.

    1. Open the admin panel and run every pending update; the maintainer notes you cannot enter the game without them. 2. In this case the database upgrade had not completed, and an old impor...

    ✓ Confirmado na issueGitHub (MUnique/OpenMU) · 2024-07-21
  8. Configuração do servidorS3E1 (1.04H)

    GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)

    The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2008-06-03
  9. Configuração do servidorS2

    Season 2 server (SrTeam files) freezes after 2 to 3 hours: login just hangs

    The freeze came from the MonsterSetBase file. 1. Replace MonsterSetBase.txt with another, clean one (for example the original of the files). 2. Restart the server and watch it for a few h...

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2009-02-27
  10. Configuração do servidor

    After about one hour of uptime nobody can log in: the login just keeps loading

    1. Set the server startup tool to reload (restart) the ConnectServer at an interval; the answer says this is done on all versions. 2. Restart the servers.

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2009-04-29
  11. Configuração do servidor

    "login server connect fail" when the server starts the GameServer

    The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2009-11-04
  12. Configuração do servidorS3E1

    DarkMaster Season 3 Episode 1: every login says the account is invalid, although all IPs are changed

    The JoinServer password mode (MD5 or plain) did not match how the accounts were created. 1. Delete the test accounts. 2. Put the JoinServer build with MD5 enabled and create the account a...

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2010-03-09
  13. Configuração do servidorMuEmu / LouisSeason 6

    After changing the client name in the main info and replacing Main.premium, the login box (ID and password) no longer appears (files with MHP)

    The Mu Hack Protection server config still had the old customer name. 1. Open C:\MuServer\MHPServer\MHPServer.ini and set CustomerName to the new name, with the right ClientVersion and Cl...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2021-03-27
  14. Ferramentas

    Which editor opens the Ex700 client BMD files (for example to change the server name text at the login screen)?

    1. MagicHand opens the Ex700 BMDs, but the client did not accept the files it saved. 2. Use zFileManager: it opens and saves the Ex700 BMD files in a form the client accepts. 3. Edit the...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2015-04-23
  15. Configuração do servidorany

    "Login failed for user 'sa'" (SQLSTATE 28000) from DataServer or the web right after installing SQL Server. How do I enable sa?

    1. If setup used Windows authentication only, sa is disabled. 2. In Management Studio right click the server > Properties > Security and pick SQL Server and Windows Authentication mode. 3...

    Reescrita da fonte pelo MuADMINSNot verifiedMicrosoft Learn · 2025-08-26
  16. Cliente do jogoMuEmu / LouisS6

    No login box appears after setting up the server (GamingMaster MuEmu S6 files).

    Edit the config files with Notepad++ or Sublime Text, as the files guide says. Windows Notepad broke the files.

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2020-05-24
  17. Cliente do jogoMuEmu / LouisS6

    The server shows online but the login box never appears; after a few seconds the client disconnects (Louis S6 Premium Update 13).

    1. In MAIN_INFO MainInfo.ini use the same CustomerName, Version and Serial as GameServer and GameServerCS (Data/GameServerInfo - Common.dat), plus your server IP. 2. Generate; main.premiu...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2019-09-08
  18. Configuração do servidor

    "Account does not exist" or the login fails although the account is in MEMB_INFO: what to check in the database

    Check these in order (all read only, nothing changes): 1. Is the server reading the same database? MuEmu, Louis, MSPro, X-Team, MuDevs use the ODBC DSN in JoinServer.ini (JoinServerODBC =...

    Not verifiedEscrito pelo MuADMINS
  19. Configuração do servidorIGCNS12, S16, S17, S18

    IGCN Me_MuOnline (shared accounts): login fails or new accounts are not found after enabling it

    Me_MuOnline is a separate accounts database. It has its own MEMB_INFO, MEMB_STAT, T_VIPList, ConnectionHistory, IGC_MachineID_Banned, fn_md5, WZ_CONNECT_MEMB and WZ_DISCONNECT_MEMB. 1. IG...

    Not verifiedEscrito pelo MuADMINS
  20. FerramentasWebZen 97d / 99b1.02n S2

    CzF Editor: after restoring the databases the editor login fails with 'ID not authenticated or banned' (1.02n + S2)

    1. The editor login you created on the first run was lost when the databases were restored. 2. Close the editor and open its folder. 3. Delete (or edit) CzFMuEditor.ini. Its [ODBCConnecti...

    ✓ Confirmado pelo autor do tópicoImperyus Games Brasil · 2011-06-03

Vídeos no MUTube

Mais vídeos de “login”

Ainda com problema? Pergunte ao Assistente MU Buscar no MuGPS

MuADMINS Community Alpha: grátis, feito pela comunidade e em desenvolvimento ativo.