Community AlphaAlpha MUADMINS
PTPortuguês (Brasil)
Entrar
No MuADMINSConfig ScannerEnvie o zip dos seus arquivos: rates, drops, spots, limitesAbrirNo MuADMINSEncontre-nos no DiscordPeça ajuda, mostre o que está criando e converse sobre MU com outros donos de servidores.Abrir

MuADMINS

Soluções

Correções curtas para problemas comuns de servidor, cliente e site de MU Online, cada uma com a fonte e a data. “Confirmado” significa que quem perguntou disse que a correção funcionou.

178 soluções para “game server does not start” · Limpar

  1. Configuração do servidorMSPro

    MSPro: GameServer does not open after a VPS restart or a move to a new VPS, and no error is shown

    The MSPro license is bound to the machine's HWID. A new VPS, or some VPS restarts, changes the HWID, and then the GameServer does not open and shows no error. 1. Request or regenerate the...

    ✓ Confirmado pelo autor do tópicoEscrito pelo MuADMINS · 2026-10-31
  2. FerramentasOpenMU

    OpenMU admin panel: on a fresh install the client cannot reach the server selection. How do I start the listeners and add a game server?

    1. Open Servers (/servers). A fresh install does not start its listeners: start both connect servers and at least one game server. 2. To start them automatically, enable *Auto Start* in t...

    Reescrita da fonte pelo MuADMINSNot verifiedGitHub (MUnique/OpenMU) · 2026-10-17
  3. FerramentasOpenMU

    OpenMU: after an update a game server stays stopped or the admin panel shows pending updates. How do I apply configuration updates?

    1. New versions bring changes to the game configuration data (monster stats, drop groups, plugin configurations, quests). They are not applied to your existing database by the software up...

    Reescrita da fonte pelo MuADMINSNot verifiedGitHub (MUnique/OpenMU) · 2026-10-27
  4. Configuração do servidor

    "login server connect fail" when the server starts the GameServer

    The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2009-11-04
  5. Configuração do servidor97d+99i

    GameServer error at start with DarkMaster 97d+99i Beta 13 files, fixed by turning off the EventChip server connection

    1. Open Data\commonserver.cfg. 2. Find EventChipServerConnect = 1 and change it to EventChipServerConnect = 0. 3. Restart the GameServer.

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2011-04-23
  6. Configuração do servidor

    GameServer starts normally but crashes after a few minutes

    1. First read the GameServer logs: a broken event (Blood Castle, Devil Square) can stop the GS. 2. In this case the events and the GameServer were fine: the culprit was the ConnectServer....

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2011-05-11
  7. Configuração do servidorX-TeamSeason 15

    X-Team Season 15 files (update 5): GameServer shows a message that something 'does not exist' and will not start

    The error is about the server code and the GameServer common file of the update. 1. Check the ServerCode is the same in ConnectServer\ConnectServer.txt, Data\MapServerInfo and the GameSer...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2020-08-15
  8. Configuração do servidorMuEmu / LouisSeason 6

    Legion Team (Rodrigo117) files: GameServerCS shows an error at start while the normal GameServer runs

    The common config of the GameServers was incomplete, so the normal GameServer and GameServerCS tried to use the same (wrong) port. 1. Open the common config file of each GameServer (norma...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2020-08-06
  9. Configuração do servidor0.97d

    Aminyuz 97d files: GameServer gives a conexion.ini connection error at start although all IPs are right (EventServer and Ranking open fine)

    The SQL login in the Aminyuz connection file was wrong. 1. Open C:\MuServer\Aminyuz\Conexion (the connection ini of these files). 2. In the [SQL] block set Usuario = sa (your SQL user), C...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2020-02-21
  10. Configuração do servidorS2

    Season 2 files (KarLi tutorial): everything starts except GameServerCS, which fails

    1. Use your LAN address (192.168.x.x) only in MapServerInfo.dat and in the ConnectServer ServerList.dat. 2. Everywhere else in the server configs and the startup put 127.0.0.1. 3. In main...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2018-10-25
  11. Configuração do servidorMuEmu / LouisS6

    MuEmu (compiled from source, antihack on): players are disconnected when moving to Crywolf and other GameServerCS maps, even with the CS port (55919) open.

    1. Open GameServer - Common of the GameServer(s). 2. Add the missing CustomerName and CustomerHardwareId lines (needed after compiling with the antihack enabled). 3. Restart GameServer an...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2019-01-02
  12. Configuração do servidorany

    My GameServer (port 55901 and up) sometimes fails to start because the port is already in use. How do I check the Windows dynamic port range?

    1. Since Windows Vista and Server 2008, outgoing connections use local ports 49152 to 65535 by default, which includes 55901, 55960, 55970. 2. Show the range: netsh int ipv4 show dynamicp...

    Reescrita da fonte pelo MuADMINSNot verifiedMicrosoft Learn · 2026-02-12
  13. Configuração do servidorOpenMUany

    OpenMU in Docker: game servers keep reporting my public IP to the client and -resolveIP / RESOLVE_IP seem ignored. How do I set loopback or local?

    1. Open the admin panel and go to the game configuration, System section. 2. Change the IP Resolving setting (Public by default) to Loopback for same machine tests, Local for a LAN, or Cu...

    ✓ Confirmado na issueGitHub (MUnique/OpenMU) · 2026-02-13
  14. FerramentasOpenMU

    OpenMU admin panel: how do I switch off a game feature, or run an event like Blood Castle or an invasion only on some game servers?

    1. Open Configuration, Plugins (/plugins) and filter by extension point, name or type. 2. Deactivate turns a plugin off, Activate turns it on again. Many plugins are core mechanics (packe...

    Reescrita da fonte pelo MuADMINSNot verifiedGitHub (MUnique/OpenMU) · 2026-10-18
  15. FerramentasOpenMU

    OpenMU admin panel: how do I change the experience rate for all servers or only for one game server?

    1. Go to Configuration, General and change Experience rate (and Master experience rate if you want). 2. Save. 3. Click Reload configuration and restart all game servers on the Servers pag...

    Reescrita da fonte pelo MuADMINSNot verifiedGitHub (MUnique/OpenMU) · 2026-09-28
  16. Configuração do servidorany

    GameServer, DataServer or JoinServer will not start: MSVCR100.dll, MSVCP120.dll or VCRUNTIME140.dll is missing. Which runtime do I install?

    1. The number in the DLL name tells the Visual C++ version: 80 = 2005, 90 = 2008, 100 = 2010, 110 = 2012, 120 = 2013, 140 = 2015 to 2026. 2. Download the matching Visual C++ Redistributab...

    Reescrita da fonte pelo MuADMINSNot verifiedMicrosoft Learn · 2025-12-03
  17. Configuração do servidorMuEmu / LouisS6

    Louis S6 Up13 GameServer window never opens, shows an error and fills the folder with .dmp files after editing configs.

    1. Restore the original Data folder; if the server starts, the bad file is in there. 2. Put your edited files back one by one, starting with the ones you changed, until it fails again. 3....

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2021-10-11
  18. Configuração do servidorOpenMUany

    OpenMU worked before, but after the PC ran for a while the game server cannot listen on 55901 or players cannot connect. Why?

    1. Ports 49152 to 65535 are the Windows dynamic range used for outgoing connections, so another process can already hold 55901 and up. 2. Newer OpenMU databases use 45901 to 45906 for gam...

    Reescrita da fonte pelo MuADMINSNot verifiedGitHub (MUnique/OpenMU docs) · 2026-10-11
  19. FerramentasOpenMUup to S6

    OpenMU Network Analyzer (MUnique): how to capture and read the packets between a MU client and a game server

    1. The analyzer is a proxy: it listens for the client, connects to the real server and forwards, decrypts and encrypts all traffic so you can read it. 2. Enter the local port it should li...

    Reescrita da fonte pelo MuADMINSNot verifiedRaGEZONE · 2018-01-02
  20. GameplayMuEmu / LouisSeason 6 (MuEmu)

    How do I remove the timed (expiring) starting items new characters get?

    1. Open MuServer/Data/Custom/CustomStartItem. 2. Remove or edit the starting item lines. 3. Restart the GameServer.

    ✓ Confirmado pelo autor do tópicoCreandoMU · 2021-06-03
Ainda com problema? Pergunte ao Assistente MU Buscar no MuGPS Buscar no MUTube

MuADMINS Community Alpha: grátis, feito pela comunidade e em desenvolvimento ativo.