Community AlphaAlpha MUADMINS
PTPortuguês (Brasil)
Entrar
No MuADMINSConfig ScannerEnvie o zip dos seus arquivos: rates, drops, spots, limitesAbrirNo MuADMINSEncontre-nos no DiscordPeça ajuda, mostre o que está criando e converse sobre MU com outros donos de servidores.Abrir

MuADMINS

Soluções

Correções curtas para problemas comuns de servidor, cliente e site de MU Online, cada uma com a fonte e a data. “Confirmado” significa que quem perguntou disse que a correção funcionou.

187 soluções para “firewall” · Limpar

  1. Configuração do servidor

    How to protect the server from attackers with the firewall

    Only the ConnectServer and GameServer must be reachable from outside. 1. In the firewall block outside access for: MySQL (mysqld.exe), the DataServer(s), ExDB, EventServer, RankingServer,...

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2008-06-30
  2. Configuração do servidor

    With the firewall turned on nobody can enter my server or my website; with it off they can

    The firewall blocks the server ports. 1. In the firewall allow (unblock) TCP 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Also allow port 80 for the website. 3....

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2012-07-14
  3. Siteany

    WebEngine CMS on a web host cannot reach the SQL Server on a VPS: 'Could not connect to database (1)', even after opening port 1433 in the firewall and enabling TCP/IP.

    1. Check the usual items first: inbound rule for TCP 1433 in Windows Defender Firewall on the VPS, TCP/IP enabled in SQL Server Configuration Manager. 2. If it still fails, test whether t...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2025-02-12
  4. Configuração do servidorany

    How do I open the MU server ports (44405, 55901, 55919 and others) in Windows Firewall quickly and correctly?

    1. Open PowerShell as administrator on the server. 2. Create one inbound rule for all TCP ports, for example: New-NetFirewallRule -DisplayName "MU Server" -Direction Inbound -Protocol TCP...

    Reescrita da fonte pelo MuADMINSNot verifiedMicrosoft Learn · 2025-05-14
  5. FerramentasMuEmu / Louis

    ImportToEmu: editing a movereq.bmd that no other editor opens (MagicHand shows it blank) to change the level required per map

    1. On the server side the level per map is the MinLevel column of MuServer\Data\Move\Move.txt. 2. For the client file use ImportToEmu by Natzugen (TUServerMU topic 14368): it opens movere...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2018-06-24
  6. Configuração do servidor

    How to change the ConnectServer port 44405, and login fails after changing it

    1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2010-12-21
  7. Ferramentasany

    How to export an item .bmd model to .obj to edit it in a 3D program (or 3D print it)

    1. Convert the item .bmd to SMD with a BMD to SMD converter. 2. Open MilkShape 3D and use File > Import > Half-Life SMD to load it. 3. Work on it there, or use File > Export > Wavefront O...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2021-04-15
  8. Configuração do servidorX-TeamS8

    X-Team MuEmu S8E3: players cannot get in because Mu Hack Protection shows an error, even with the usual ports open.

    1. Open the MHP port 55999 TCP in the firewall and router, besides 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Port 55557 does not need to be opened. 3. Check...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2017-04-21
  9. Configuração do servidorMuEmu / LouisS8

    Two MuEmu S8 servers on one machine: the first works, the second disconnects at login although its ports (55902, 55920, 55961, 55971) are forwarded.

    1. Open the router page and check that the forwarding rules for the second server ports are really enabled, not only created. 2. If a rule turns itself off again after a refresh, delete i...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2020-06-17
  10. Configuração do servidorany

    Server on my home PC works for me with the IPv4 address, but friends get disconnected even with ports added to firewall and router. What is wrong?

    1. A private (LAN) address like 192.168.x.x only works inside your own network. 2. For outside players, put your public IP (or a No-IP hostname) in the server side IP settings (ConnectSer...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2019-05-03
  11. Siteany

    WebEngine on shared hosting cannot reach SQL on my VPS. Port 1433 is open and MuMaker connects from home, but the web install still fails.

    1. The hosting company may block outgoing traffic to port 1433. 2. In SQL Server Configuration Manager > TCP/IP > IP Addresses > IPAll set TCP Port to another free port and leave TCP Dyna...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2020-05-23
  12. Configuração do servidorIGCNS15

    IGCN Season 15: at the 4th class quest phase 4, talking to the NPC to teleport freezes the game and then disconnects the player.

    1. Phase 4 runs on the instance server, whose port was not open. 2. Open the port of the instance GameServer in the Windows firewall (and router or VPS panel if used). 3. Start that serve...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2020-08-03
  13. Configuração do servidorMuDevsS16

    'You are disconnected from the server' at server select on an Amazon AWS VPS, even with all ports open in the Windows firewall (MuDevs S16 free files).

    Open the ports in the AWS console too: Security Groups > pick the right VPC/instance group > add inbound rules for the game ports. AWS blocks inbound traffic by default even when Windows...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2021-04-27
  14. Cliente do jogo

    Every MU client suddenly shows Portuguese text (reads Data/Local/Por instead of Eng) after trying another client

    1. The other client changed a registry value that every client reads. 2. Run regedit.exe and go to HKEY_CURRENT_USER\Software\Webzen\Mu\Config. 3. Change LangSelection to Eng: the clients...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2014-08-12
  15. Configuração do servidor99b

    GameServer.exe loads for a long time and then Windows shows "Send error report / Don't Send" with every server pack

    The PC was infected with the Win32.Parite (A to C) file infector, which damages .exe files. 1. Download a Parite removal tool (the thread used AntiParite) and let it scan the processes. 2...

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2008-06-19
  16. Cliente do jogoMuEmu / LouisSeason 6 Update 13

    Louis S6 Update 13 client set to English shows many texts in Portuguese and Spanish mixed in

    1. The client has one text file per language: text.bmd, text_eng.bmd, text_spn.bmd and text_por.bmd. 2. Edit the one you want (for example the English one) and copy it over the other lang...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2020-08-09
  17. FerramentasMuEmu / Louis0.97k

    Kayito MuEmu 0.97k files: where is the client BMD editor, and where do I set IP, port, version and serial of the main

    1. The open source project (MuEmu adapted to the original 0.97.11 main, by kayito) ships MuServer, Client, Encoder files, the tools and the source code on its GitHub. 2. The BMD / TXT edi...

    Reescrita da fonte pelo MuADMINSNot verifiedRaGEZONE · 2025-05-26
  18. Ferramentas

    Launcher (diablo21, DarksTeam): where to set the server IP and port and what it needs to run

    1. Set the IP and the port in data\launcher\Configuration.txt. 2. It needs the .NET Framework (dotnetfx 1.1 or newer) and Windows Installer. 3. At release its auto update read the informa...

    Reescrita da fonte pelo MuADMINSNot verifiedDarksTeam · 2009-07-12
  19. Configuração do servidorIGCN

    IGCN license system: which ports to open and why the Windows time must be synchronized before activating the server license

    1. Every IGCN application connects to the IGCN servers for activation, verification and normal use, so the license needs constant internet access. 2. Open these ports in the firewall: TCP...

    Reescrita da fonte pelo MuADMINSNot verifiedIGCN · 2022-03-28
  20. Ferramentas

    Stud_PE: how to hook (import) a DLL into main.exe, an easier way than LordPE

    1. Open Stud_PE, then File > Open PE file and open your main.exe. 2. Go to the Functions tab, right click in any free space and choose Add new Import, then Dll select and pick your DLL. 3...

    Reescrita da fonte pelo MuADMINSNot verifiedImperyus Games Brasil · 2013-01-15

Vídeos no MUTube

Mais vídeos de “firewall”

Ainda com problema? Pergunte ao Assistente MU Buscar no MuGPS

MuADMINS Community Alpha: grátis, feito pela comunidade e em desenvolvimento ativo.