MuADMINS
Soluções
Correções curtas para problemas comuns de servidor, cliente e site de MU Online, cada uma com a fonte e a data. “Confirmado” significa que quem perguntou disse que a correção funcionou.
206 soluções para “disconnected” · Limpar
MuMaker 1.12: "No connection could be made because the target machine actively refused it, error 0" or "error 40" when connecting
1. Open SQL Server Configuration Manager > SQL Server Network Configuration > Protocols for MSSQLSERVER. 2. Set TCP/IP to Enabled. 3. In TCP/IP Properties, IP Addresses tab: set Enabled t...
✓ Confirmado pelo autor do tópicoRaGEZONE · 2017-08-08Pentium Tools / text.bmd (Season 4 client without serverlist.bmd): how to change the words shown next to each server, for example slow and fast
1. Searching and editing the words in text.bmd alone did not change the list for the asker. 2. Give the server the code 20 both in the ConnectServer server list and in the ServerInfo file...
✓ Confirmado pelo autor do tópicoTUServerMU · 2017-08-21OpenMU in Docker on an OpenWrt VM (VMware, bridged Wi-Fi): the client cannot connect and the log shows InvalidPacketHeaderException.
1. That logged exception came from an HTTP client hitting the game server port, not from the MU client. 2. The real problem was packet forwarding of the bridged wireless network in VMware...
✓ Confirmado na issueGitHub (MUnique/OpenMU) · 2024-04-16How do I show sub servers grouped under one server in the list?
1. In Connectserverlist.dat the codes are 0, 1, 2... 2. Change them to 0, 21, 41, 61 (steps of 20). 3. The ConnectServer then reads them as rooms of the servers.
✓ Confirmado pelo autor do tópicoImperyus Games Brasil · 2010-12-14How do I make a working online time ranking per character?
1. Add an int column OnlineTime to the Character table (back up first). 2. Create a SQL Agent job every minute: UPDATE Character SET OnlineTime=OnlineTime+1 joined to MEMB_STAT (ConnectSt...
✓ Confirmado pelo autor do tópicoCreandoMU · 2021-03-09How to make a 1.04D main.exe connect to my server (version and serial)
1. In the [GameServerInfo] section of the server config the client version is written as numbers: ClientExeVersion = 1.04.04 means 1.04D (the last number is the letter: 4 = D). 2. Put the...
✓ Confirmado pelo autor do tópicoDarksTeam · 2008-05-16The website always shows 2 players online even when the server is off
Stale rows in MEMB_STAT still say the accounts are connected. 1. Open Query Analyzer / SSMS on the MuOnline database. 2. Run UPDATE MEMB_STAT SET ConnectStat='0' WHERE ConnectStat>0. 3. R...
✓ Confirmado pelo autor do tópicoDarksTeam · 2009-03-03After about one hour of uptime nobody can log in: the login just keeps loading
1. Set the server startup tool to reload (restart) the ConnectServer at an interval; the answer says this is done on all versions. 2. Restart the servers.
✓ Confirmado pelo autor do tópicoDarksTeam · 2009-04-29Website staff table: show whether each GM / Admin is online or offline
1. Select the staff characters: Select CtlCode,AccountID From Character where CtlCode='32'. 2. For each one check MEMB_STAT: Select * from MEMB_STAT where memb___id='<AccountID>' and Conn...
✓ Confirmado pelo autor do tópicoDarksTeam · 2010-05-14GameServer starts normally but crashes after a few minutes
1. First read the GameServer logs: a broken event (Blood Castle, Devil Square) can stop the GS. 2. In this case the events and the GameServer were fine: the culprit was the ConnectServer....
✓ Confirmado pelo autor do tópicoDarksTeam · 2011-05-11With the firewall turned on nobody can enter my server or my website; with it off they can
The firewall blocks the server ports. 1. In the firewall allow (unblock) TCP 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Also allow port 80 for the website. 3....
✓ Confirmado pelo autor do tópicoDarksTeam · 2012-07-14MuEditor on the host PC cannot connect to the SQL Server that runs inside a local virtual machine
1. In SQL Server Configuration Manager inside the VM enable TCP/IP (and Named Pipes), restart the SQL service and allow port 1433 in the VM firewall. 2. In the editor config fill both blo...
✓ Confirmado pelo autor do tópicoTUServerMU · 2019-11-24No MU website works on XAMPP (Windows 7 64-bit): SQL connection errors and php.ini extension errors although the extension is enabled
1. Turn User Account Control (UAC) back on if you had disabled it. 2. Install XAMPP again (version 1.7.1, the one these old MSSQL based sites need). 3. Put the site back and test; the SQL...
✓ Confirmado pelo autor do tópicoRaGEZONE · 2017-07-28MuCore install on a web host: after the serial number step, step_1 of the installer shows nothing (Season 6 repack)
1. Open the MuCore configuration file that holds the database settings. 2. Find $core['connection_type'] = "MSSQL";. 3. Change the value to lower case: $core['connection_type'] = "mssql";...
✓ Confirmado pelo autor do tópicoRaGEZONE · 2018-03-23MuEmu 0.97k (kayito): how do I make a second server show up in its own box ("Server 2") on the server selection screen?
1. The selection screen groups GameServers by ServerCode, 20 codes per box. 2. ServerCode 0 to 19 appear under Server 1, 20 to 39 under Server 2, 40 to 59 under Server 3, and so on. 3. Gi...
✓ Confirmado na issueGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2024-12-04After enabling TCP/IP in SQL Server for the web, DataServer, JoinServer and GameServerCS lost the database connection. How was it fixed?
1. In SQL Server Configuration Manager keep Named Pipes and TCP/IP enabled for the instance. 2. Open the ODBC DSNs used by the server files. 3. Change the Server field from the LAN IP to...
✓ Confirmado pelo autor do tópicoTuServerMU · 2020-05-23WebEngine on shared hosting cannot reach SQL on my VPS. Port 1433 is open and MuMaker connects from home, but the web install still fails.
1. The hosting company may block outgoing traffic to port 1433. 2. In SQL Server Configuration Manager > TCP/IP > IP Addresses > IPAll set TCP Port to another free port and leave TCP Dyna...
✓ Confirmado pelo autor do tópicoTuServerMU · 2020-05-23MuEmu S8 EP3: the server runs but MuEditor cannot connect to SQL, so I cannot create accounts or items. Changing the SQL password in config.ini did not help.
1. Open the editor's config.ini. 2. In the SERVER field put the name of your computer (right click This PC > Properties shows it), not an IP. 3. Fill in the SQL user (sa) and your passwor...
✓ Confirmado pelo autor do tópicoTuServerMU · 2016-09-14I cannot delete a MU database in SQL Server Management Studio, it gives an error because it is in use. How do I remove it?
1. Stop DataServer, JoinServer, the editors and the web that use the database. 2. In Management Studio right click the database > Delete. 3. In the Delete Object window tick Close existin...
✓ Confirmado pelo autor do tópicoTuServerMU · 2018-01-06MuEmu S4: the server and MuMaker do not see the databases on SQL Server 2008 R2 even with remote connections and TCP/IP enabled.
1. Check how SQL Server was installed: it had been set up as a named instance. 2. The files and MuMaker expect the default instance, reached as (local) or the PC name. 3. Reinstall SQL Se...
✓ Confirmado pelo autor do tópicoTuServerMU · 2017-11-11