Community AlphaAlpha MUADMINS
PTPortuguês (Brasil)
Entrar
No MuADMINSConfig ScannerEnvie o zip dos seus arquivos: rates, drops, spots, limitesAbrirNo MuADMINSEncontre-nos no DiscordPeça ajuda, mostre o que está criando e converse sobre MU com outros donos de servidores.Abrir

MuADMINS

Soluções

Correções curtas para problemas comuns de servidor, cliente e site de MU Online, cada uma com a fonte e a data. “Confirmado” significa que quem perguntou disse que a correção funcionou.

108 soluções para “serverlist” · Limpar

  1. Configuração do servidor

    How to protect the server from attackers with the firewall

    Only the ConnectServer and GameServer must be reachable from outside. 1. In the firewall block outside access for: MySQL (mysqld.exe), the DataServer(s), ExDB, EventServer, RankingServer,...

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2008-06-30
  2. Configuração do servidor

    "login server connect fail" when the server starts the GameServer

    The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2009-11-04
  3. Configuração do servidor

    With the firewall turned on nobody can enter my server or my website; with it off they can

    The firewall blocks the server ports. 1. In the firewall allow (unblock) TCP 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Also allow port 80 for the website. 3....

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2012-07-14
  4. GameplaySeason 6 Episode 3

    S6 Ep3 files: killing monsters lowers the experience bar instead of raising it

    The experience formula constants were changed by mistake. 1. Open the GameServer common config (GameServerInfo - Common) and find the experience section. 2. Put the experience constant va...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2021-01-08
  5. GameplayMuEmu / LouisSeason 6

    MuEmu: the reset limit was set to 30 but a character with 30 resets can still /reset to 31

    1. Open MuServer\GameServer\Data\GameServerInfo - Command.txt (reset command section). 2. Set the general limit CommandResetLimit for every account level (AL0 to AL3) to 30; this was the...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2020-11-02
  6. Configuração do servidorMuEmu / LouisSeason 6

    Legion Team (Rodrigo117) files: GameServerCS shows an error at start while the normal GameServer runs

    The common config of the GameServers was incomplete, so the normal GameServer and GameServerCS tried to use the same (wrong) port. 1. Open the common config file of each GameServer (norma...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2020-08-06
  7. Configuração do servidor

    Anyone can log in with a random account name and password, and the login creates that account in SQL

    1. This is not a database bug: the server has automatic account registration switched on, so an unknown login is created on the spot. 2. Open the JoinServer config (in some files the opti...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2021-04-15
  8. Configuração do servidorX-TeamS8

    X-Team MuEmu S8E3: players cannot get in because Mu Hack Protection shows an error, even with the usual ports open.

    1. Open the MHP port 55999 TCP in the firewall and router, besides 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Port 55557 does not need to be opened. 3. Check...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2017-04-21
  9. Configuração do servidorMuEmu / Louis97d

    Kayito MuEmu 0.97k download has no JoinServer and DataServer folders. Where are they?

    1. First choose your database engine: SQL Server or MySQL. 2. For SQL Server copy JoinServer and DataServer from the MSSQL folder; for MySQL take them from the MySQL folder. 3. Put both n...

    ✓ Confirmado na issueGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2025-06-22
  10. Cliente do jogoMuEmu / Louisany

    The client says "You are disconnected from the server" although the IPs, ah.info and main.info look correct. Where should I look?

    1. Check that the basic ports are open: ConnectServer (44405) and GameServer (55901, 55919 for the CS server). 2. Open the client main.info settings again and check every value: IP, port...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2019-04-30
  11. Configuração do servidorMuEmu / LouisS6

    MuEmu S6 on a VPS: the client works inside the VPS, but from home it shows the antihack logo, says it could not connect and closes.

    1. When it works on the VPS itself but not from outside, the Windows Firewall of the VPS is the usual cause. 2. On the VPS, create inbound TCP allow rules for the ConnectServer port (4440...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2018-11-18
  12. Configuração do servidorMuEmu / LouisS9, S17

    The open source C# MuEmu project (Yomalex) shows a startup error and the game server does not start.

    1. Copy the Data folder from the repository into the same folder as the MuEmu binary. 2. Make the APIKey in MuEmu Server.xml equal to the apiKey in the CSEmu configuration.xml (example: a...

    ✓ Confirmado na issueGitHub (Yomalex/MuEmu) · 2024-09-14
  13. GameplayMuEmu / LouisS6

    MuEmu S6: where to change the success rate of Jewel of Harmony refining (Elphis) and refining stones (Osbourne)?

    1. Open the ChaosMix settings in GameServer/DATA (GameServerInfo - ChaosMix). 2. JewelOfHarmonyItemPurityMixRate_AL0 to _AL3 set the gemstone to Harmony rate per account level. 3. JewelOf...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2020-09-11
  14. GameplayMuEmu / LouisS6E3

    Louis S6 Ep3: after /reset the character gets a huge or negative Zen amount (shows -7000 in the database).

    1. The Zen cost was set in two places that conflicted for /reset. 2. Set the MoneyReq columns of the reset command line in Command.txt to 0. 3. Keep the reset Zen cost only in GameServerI...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2024-08-24
  15. Configuração do servidorMuEmu / Louis

    Louis (MuEmu) server ran out of item serials: every new item gets serial FFFFFFFF and is flagged as a dupe.

    1. Serials come from the stored procedure WZ_GetItemSerial, which increments ItemCount in table GameServerInfo for every created item (drops, bags, commands). 2. Edit that existing proced...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2024-08-02
  16. Configuração do servidorMuEmu / LouisS8

    The server works on the host PC, but other players cannot get in (MuEmu S8).

    1. Exclude main.exe from DEP and add the client folder to the antivirus exceptions. 2. Open the antihack port 55999 in the Windows firewall and in the router. 3. Allow ConnectServer and G...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2017-01-18
  17. Cliente do jogoMuEmu / LouisS6

    The server shows online but the login box never appears; after a few seconds the client disconnects (Louis S6 Premium Update 13).

    1. In MAIN_INFO MainInfo.ini use the same CustomerName, Version and Serial as GameServer and GameServerCS (Data/GameServerInfo - Common.dat), plus your server IP. 2. Generate; main.premiu...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2019-09-08
  18. Ferramentas

    HashCalculator (DaoVanTrong): how to make the auto update file list (List.inf for Webzen mu.exe, or CRC32 / MD5 / SHA1 lists)

    1. Drag the client folder (or your update folder, or any folder) onto the HashCalculator program icon: it calculates the codes at once and writes the report files. If you drag nothing, it...

    Reescrita da fonte pelo MuADMINSNot verifiedRaGEZONE · 2018-04-21
  19. FerramentasS16

    MuClientTools16: how do I open Season 16 client files (Lang.mpr, data BMDs, OZJ/OZT textures, BMD models, map files)?

    1. The tools target the Season 16 part 1.1 client (Lgd_Test 1.19.46); files of older or newer versions might or might not work. 2. Data files: the tools decode and encode the 45 data BMDs...

    Reescrita da fonte pelo MuADMINSNot verifiedGitHub (VDraven/MuClientTools16) · 2022-07-08
  20. Ferramentas

    Repack Zero Launcher (MuEmu / IGK): how to publish an update with VEREXE.txt and ParcheX.zip, and how to change its background

    1. On the hosting, edit VEREXE.txt inside the Launcher folder and raise the number by one for each new update (1 becomes 2 and so on). 2. Put the files to update in a zip named ParcheX.zi...

    Reescrita da fonte pelo MuADMINSNot verifiedTUServerMU · 2018-10-21

MuADMINS Community Alpha: grátis, feito pela comunidade e em desenvolvimento ativo.