Community AlphaAlpha MUADMINS
PTPortuguês (Brasil)
Entrar
No MuADMINSConfig ScannerEnvie o zip dos seus arquivos: rates, drops, spots, limitesAbrirNo MuADMINSEncontre-nos no DiscordPeça ajuda, mostre o que está criando e converse sobre MU com outros donos de servidores.Abrir

MuADMINS

Soluções

Correções curtas para problemas comuns de servidor, cliente e site de MU Online, cada uma com a fonte e a data. “Confirmado” significa que quem perguntou disse que a correção funcionou.

733 soluções para “kosh” · Limpar

  1. Configuração do servidorany

    JoinServer and DataServer show Could not connect to database on start.

    1. Restore the MuOnline database correctly in SQL Server (from the backup shipped with your files). 2. Create the ODBC data source the servers expect, pointing to that database. 3. Make s...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2017-07-05
  2. Configuração do servidorany

    ConnectServer and GameServer drop every few hours with WSASend error 10054 and protocol header errors once many players join.

    1. Check the real player limit of your files: these were built for 250 users, not 1000. 2. Above that number the server falls over. 3. Add a sub server (another GameServer) to spread play...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2021-05-30
  3. Configuração do servidorMuEmu / LouisS6

    Louis S6 Up13 GameServer window never opens, shows an error and fills the folder with .dmp files after editing configs.

    1. Restore the original Data folder; if the server starts, the bad file is in there. 2. Put your edited files back one by one, starting with the ones you changed, until it fails again. 3....

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2021-10-11
  4. Configuração do servidorMuEmu / Louis97d

    Kayito MuEmu 0.97k download has no JoinServer and DataServer folders. Where are they?

    1. First choose your database engine: SQL Server or MySQL. 2. For SQL Server copy JoinServer and DataServer from the MSSQL folder; for MySQL take them from the MySQL folder. 3. Put both n...

    ✓ Confirmado na issueGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2025-06-22
  5. Siteany

    The WebEngine downloads page does not list my client, patch and tool files. What is wrong?

    1. This was a bug in older WebEngine builds where the download lists were not initialised as arrays. 2. Update to WebEngine 1.2.5 or newer, where the maintainer fixed it. 3. If a category...

    ✓ Confirmado na issueGitHub (lautaroangelico/WebEngine) · 2023-10-09
  6. Siteany

    WebEngine player profile and character editor fail for names with [ ] tags like [ADM]Name. How to fix?

    1. Older versions filter player names to letters and numbers, so names with brackets break the profile links. 2. Update to WebEngine 1.2.6 or newer: player and guild profile links are Bas...

    ✓ Confirmado na issueGitHub (lautaroangelico/WebEngine) · 2022-08-17
  7. Siteany

    WebEngine shows a PDOException with my SQL Server host, user and password on screen when the database is down. How do I hide it?

    1. The full stack trace is printed only because debug mode is turned on in your WebEngine configuration. 2. Turn debug mode off on the live site so visitors only see a generic error. 3. I...

    ✓ Confirmado na issueGitHub (lautaroangelico/WebEngine) · 2017-08-10
  8. Configuração do servidorMuEmu / Louis0.97k

    MuEmu 0.97k (kayito): how do I make a second server show up in its own box ("Server 2") on the server selection screen?

    1. The selection screen groups GameServers by ServerCode, 20 codes per box. 2. ServerCode 0 to 19 appear under Server 1, 20 to 39 under Server 2, 40 to 59 under Server 3, and so on. 3. Gi...

    ✓ Confirmado na issueGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2024-12-04
  9. Cliente do jogoS5

    Season 5 files: the client says to update the version (version error) and I cannot log in. What must match?

    1. The client version and serial must be exactly the same as the Version and Serial in the GameServer configuration. 2. Compare them character by character: one wrong letter, digit or sym...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2019-08-01
  10. Cliente do jogoMuEmu / Louisany

    The client says "You are disconnected from the server" although the IPs, ah.info and main.info look correct. Where should I look?

    1. Check that the basic ports are open: ConnectServer (44405) and GameServer (55901, 55919 for the CS server). 2. Open the client main.info settings again and check every value: IP, port...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2019-04-30
  11. Configuração do servidorMuEmu / LouisS6

    MuEmu S6 on a VPS: the client works inside the VPS, but from home it shows the antihack logo, says it could not connect and closes.

    1. When it works on the VPS itself but not from outside, the Windows Firewall of the VPS is the usual cause. 2. On the VPS, create inbound TCP allow rules for the ConnectServer port (4440...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2018-11-18
  12. Configuração do servidorMuEmu / LouisS6

    MuEmu S6 (Louis): the client reaches the server selection, but when I pick the server it disconnects. What is missing?

    1. The ConnectServer port works, but the GameServer port (55901 by default) is blocked. 2. For a local test, add an inbound firewall rule for the GameServer port (or briefly turn off Wind...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2018-11-16
  13. Configuração do servidorMuEmu / LouisS8

    Two MuEmu S8 servers on one machine: the first works, the second disconnects at login although its ports (55902, 55920, 55961, 55971) are forwarded.

    1. Open the router page and check that the forwarding rules for the second server ports are really enabled, not only created. 2. If a rule turns itself off again after a refresh, delete i...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2020-06-17
  14. Configuração do servidorany

    I run one server on my VPS and want a second one with its own database on the same VPS, but it does not connect. What must change?

    1. Give the second server its own database and create a new ODBC data source pointing to it (same driver, Server = (local), Database = new name). 2. Point the second JoinServer and DataSe...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2019-10-09
  15. Configuração do servidorMuEmu / LouisS6

    Friends can join my MuEmu S6 server from outside, but I cannot connect from another PC in the same LAN as the server. Which port is missing?

    1. It is usually not a port: many routers do not let LAN PCs reach their own public IP (no NAT loopback). 2. Use a No-IP hostname as the server address in the ConnectServer server list, m...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2020-07-14
  16. Cliente do jogoMuEmu / LouisS6

    Testing a MuEmu S6 server on my home PC with the public IP set everywhere, the client says disconnected when entering. How do I fix it?

    1. For a test on the same PC or LAN, do not use the public IP: your router may not loop traffic back to itself. 2. Replace the public IP with the private IPv4 address of the server PC (se...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2018-10-28
  17. Configuração do servidorany

    Server on my home PC works for me with the IPv4 address, but friends get disconnected even with ports added to firewall and router. What is wrong?

    1. A private (LAN) address like 192.168.x.x only works inside your own network. 2. For outside players, put your public IP (or a No-IP hostname) in the server side IP settings (ConnectSer...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2019-05-03
  18. Configuração do servidorany

    After enabling TCP/IP in SQL Server for the web, DataServer, JoinServer and GameServerCS lost the database connection. How was it fixed?

    1. In SQL Server Configuration Manager keep Named Pipes and TCP/IP enabled for the instance. 2. Open the ODBC DSNs used by the server files. 3. Change the Server field from the LAN IP to...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2020-05-23
  19. Configuração do servidorMuEmu / Louisany

    After moving from TitansTech to MuEmu, characters roll back on relog: items and position are not saved. The database was converted. What fixed it?

    1. Character data is saved by the DataServer, so check that first, not the tables. 2. Do not reuse the DataServer from your old TitansTech files: it did not work with MuEmu. 3. Use the Da...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2017-11-02
  20. Siteany

    WebEngine on shared hosting cannot reach SQL on my VPS. Port 1433 is open and MuMaker connects from home, but the web install still fails.

    1. The hosting company may block outgoing traffic to port 1433. 2. In SQL Server Configuration Manager > TCP/IP > IP Addresses > IPAll set TCP Port to another free port and leave TCP Dyna...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2020-05-23

MuADMINS Community Alpha: grátis, feito pela comunidade e em desenvolvimento ativo.