MuADMINS
Soluções
Correções curtas para problemas comuns de servidor, cliente e site de MU Online, cada uma com a fonte e a data. “Confirmado” significa que quem perguntou disse que a correção funcionou.
206 soluções para “connect” · Limpar
Using a skill like Twisting Slash for a few seconds disconnects the player (Season 3.1 KOR files)
1. The disconnect comes from the GameServer antihack checks that treat fast repeated skill use as a hack. 2. Open commonserver.dat and disable the antihack settings (the topic starter dis...
✓ Confirmado pelo autor do tópicoRaGEZONE · 2018-03-31IGCN S9 E2 repack: 'No active Game Servers found' and disconnect when the server settings use a DDNS hostname
1. Put the real (numeric) IP address in the GameServer and server list settings instead of the DDNS hostname. 2. Restart the ConnectServer and GameServer and connect again. 3. If you must...
✓ Confirmado pelo autor do tópicoRaGEZONE · 2018-12-29Replacing WZ_DISCONNECT_MEMB for MuCore gives 'Msg 468 ... Cannot resolve the collation conflict between Latin1_General_CS_AS and SQL_Latin1_General_CP1_CI_AS'
1. The procedure compares memb___id from MEMB_INFO with memb___id from MEMB_STAT, and the two columns use different collations. 2. In SQL Server Management Studio set the same collation o...
✓ Confirmado pelo autor do tópicoRaGEZONE · 2015-11-30IGCN S9 E2 repack: DataServer says 'Login failed for user ...' (SQLSTATE 28000) and 'DATA SERVER CANNOT CONNECT TO MSSQL'
1. The repack DataServer config came with a SQL login that does not exist on your SQL Server (here a random name like D2a78Rtko0), so the login fails. 2. Open the database settings of the...
✓ Confirmado pelo autor do tópicoRaGEZONE · 2019-07-14Yomalex MuEmu (C#) with the Season 9 client: CSEmu lists the server but the client shows "You are disconnected from the server" a few seconds after start.
1. The Season 9 client used by this project is an IGCN client: rename the project Main.dll to IGC.dll and replace it in the client. 2. Do not use 127.0.0.1 as the server address: the clie...
✓ Confirmado na issueGitHub (Yomalex/MuEmu) · 2023-06-28The client says "You are disconnected from the server" although the IPs, ah.info and main.info look correct. Where should I look?
1. Check that the basic ports are open: ConnectServer (44405) and GameServer (55901, 55919 for the CS server). 2. Open the client main.info settings again and check every value: IP, port...
✓ Confirmado pelo autor do tópicoTuServerMU · 2019-04-30MuEmu S6 on a VPS: the client works inside the VPS, but from home it shows the antihack logo, says it could not connect and closes.
1. When it works on the VPS itself but not from outside, the Windows Firewall of the VPS is the usual cause. 2. On the VPS, create inbound TCP allow rules for the ConnectServer port (4440...
✓ Confirmado pelo autor do tópicoTuServerMU · 2018-11-18MuEmu S6 (Louis): the client reaches the server selection, but when I pick the server it disconnects. What is missing?
1. The ConnectServer port works, but the GameServer port (55901 by default) is blocked. 2. For a local test, add an inbound firewall rule for the GameServer port (or briefly turn off Wind...
✓ Confirmado pelo autor do tópicoTuServerMU · 2018-11-16On a 0.99b server the ConnectServer closes by itself when I replace the numeric IP with a No-IP hostname. Why?
1. Old 0.99b ConnectServer builds only accept an address as long as a numeric IP. 2. Keep the hostname at 14 characters or less including the dots (the length of a full IPv4 address strin...
✓ Confirmado pelo autor do tópicoTuServerMU · 2021-02-10Server on my home PC works for me with the IPv4 address, but friends get disconnected even with ports added to firewall and router. What is wrong?
1. A private (LAN) address like 192.168.x.x only works inside your own network. 2. For outside players, put your public IP (or a No-IP hostname) in the server side IP settings (ConnectSer...
✓ Confirmado pelo autor do tópicoTuServerMU · 2019-05-03WebEngine CMS on a web host cannot reach the SQL Server on a VPS: 'Could not connect to database (1)', even after opening port 1433 in the firewall and enabling TCP/IP.
1. Check the usual items first: inbound rule for TCP 1433 in Windows Defender Firewall on the VPS, TCP/IP enabled in SQL Server Configuration Manager. 2. If it still fails, test whether t...
✓ Confirmado pelo autor do tópicoRaGEZONE · 2025-02-12WebEngine CMS install keeps saying 'Could not connect to database (1)' with SQL Server 2008 and XAMPP (PDO ODBC), even though SSMS connects fine.
1. The thread found a conflict between SQL Server 2008 and WebEngine's connection. 2. Install a newer SQL Server (2012 worked for the topic starter; another user had 2019 working). 3. Res...
✓ Confirmado pelo autor do tópicoRaGEZONE · 2023-10-06OpenMU in Docker on Windows: the client sees the server list but is disconnected when joining a server.
1. Use the client version the server targets (1.04d English, Season 6 E3). 2. Open the ports in the Windows firewall (and allow NAT edge traversal). 3. The connect server hands out the IP...
✓ Confirmado na issueGitHub (MUnique/OpenMU) · 2019-11-12'You are disconnected from the server' when selecting the server, after the IP was changed in many config files (MuEmu files).
1. Put your IP only in ConnectServer/ServerList.dat and GameServer Data/MapServerInfo.dat. 2. Leave every other IP entry at 127.0.0.1. 3. If you use the antihack, open its port 55999. 4....
✓ Confirmado pelo autor do tópicoTuServerMU · 2021-02-20"Connect Failed" when you start the client on the PC that runs the server (No-IP address)
With a No-IP (dynamic DNS) name in the client, players outside can connect, but the PC that runs the server often cannot, because most home routers do not route your public address back i...
✓ Confirmado pelo autor do tópicoTUServerMU · 2021-04-15WebEngine on web hosting says "Could not connect to database (1)"
Shared web hosting often blocks outgoing connections to port 1433, the default SQL Server port, so the website cannot reach the database on your VPS even when tools on your own PC can. 1....
✓ Confirmado pelo autor do tópicoTUServerMU · 2021-02-07Client disconnects right after choosing the server (server on a VPS)
The server list shows, so the ConnectServer port is open, but the client is dropped when it moves on to the GameServer: the GameServer port is closed somewhere. 1. Find the GameServer por...
✓ Confirmado pelo autor do tópicoTUServerMU · 2023-09-16JoinServer and DataServer cannot connect to the database although the backup is restored
These files had the database name MuOnlineS6 in the server configs while the database was restored as MuOnline, so the servers looked for a database that does not exist. 1. In SQL Server...
✓ Confirmado pelo autor do tópicoTUServerMU · 2018-09-27What does the DmN CMS setup change in the MU database (columns, Character.id, WZ_CONNECT_MEMB) and what can break?
The DmN CMS 1.2.3 setup does more than create its own tables: 1. It ALTERs the game databases: adds columns from its version files, for example MEMB_INFO Admin, last_login, activated, act...
Not verifiedEscrito pelo MuADMINSCould not find stored procedure 'WZ_CONNECT_MEMB' (or WZ_DISCONNECT_MEMB): what they do and how to restore them
WZ_CONNECT_MEMB and WZ_DISCONNECT_MEMB keep MEMB_STAT up to date (ConnectStat 1 at login, 0 at logout). They must exist in the database the JoinServer / DataServer connects to: - IGCN: in...
Not verifiedEscrito pelo MuADMINS