Community AlphaAlpha MUADMINS
PLPolski
Zaloguj się
Na MuADMINSConfig ScannerWgraj zip swoich plików: rates, dropy, spoty, limityOtwórzNa MuADMINSSpotkajmy się na DiscordziePoproś o pomoc, pokaż, nad czym pracujesz, i rozmawiaj o MU z innymi właścicielami serwerów.Otwórz

MuADMINS

Rozwiązania

Krótkie poprawki częstych problemów z serwerem, klientem i stroną MU Online, każda ze źródłem i datą. “Potwierdzone” oznacza, że osoba, która pytała, potwierdziła, że poprawka zadziałała.

Rozwiązania: 33 dla “serverlist.dat” · Wyczyść

  1. NarzędziaS6

    MagicHand does not work to edit ServerList.bmd of a Season 6 client

    1. MagicHand is a PHP editor: it does not run by opening its files directly. Put it in the XAMPP htdocs folder, next to your web site files. 2. Start Apache in XAMPP and open the editor f...

    ✓ Potwierdzone przez autora tematuRaGEZONE · 2011-05-27
  2. NarzędziaMuEmu / LouisSeason 6

    MainInfo (Louis Emulator S6): how to rename the sub servers and remove the '(Gold)' label with ServerList.bmd and CustomServerName.txt

    1. With Pentium Tools open the client Data/Local/ServerList.bmd: it has 3 entries; give all three the same server name (for example MeuServer). 2. On the server, note the number of each s...

    ✓ Potwierdzone przez autora tematuCreandoMU · 2022-10-09
  3. NarzędziaMuEmu / Louis

    ServerList (MuEmu): two sub servers both show as Gold in the server list; how the server code decides Gold or Free

    1. MuEmu splits the server codes in ranges: ServerCode 0 to 8 (servers 1 to 9) show as Gold. 2. ServerCode 9 to 19 (servers 10 to 20) show as Free, with no label; code 19 is the one that...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2017-07-26
  4. NarzędziaMuEmu / LouisSeason 4

    Text.bmd: a MuEmu Season 4 client has no ServerList.bmd; where are the server names changed?

    1. Season 4 clients have no ServerList.bmd in Data\Local\Eng, Por or Spn like newer clients. 2. The server names are in Text.bmd inside the client Data\Local folder. 3. Open Text.bmd with...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2019-07-06
  5. NarzędziaMuEmu / LouisSeason 6

    ServerList.bmd (MuEmu Season 6): a third server added with MagicHand does not appear in the client list

    1. Editing the current ServerList with MagicHand did not help in this case: the list kept showing only two servers. 2. Take the ServerList file from another client (the asker used a 2012...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2021-01-09
  6. Konfiguracja serweraMuEmu / Louis0.97k (update 23)

    Kayito 0.97k update 23: Chinese server names in ServerList.dat show garbled, changing the file encoding does not help.

    1. Update 23 converts the text with IsEncodingAnsi in MemScript.cpp, which broke it. 2. The maintainer corrected it for the next release (update 24), so update to update 24 or later. 3. A...

    ✓ Potwierdzone w zgłoszeniuGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2024-08-30
  7. NarzędziaOpenMU

    MuMain: where is ServerList.bmd, and how do I name the server groups or put a game server into a second group?

    1. The open source client replaced the encrypted Data/Local/ServerList.bmd with Data/Local/ServerList.json, read at start. 2. Each group has an id, a name, an optional description and cha...

    Opracowanie źródła przez MuADMINSNot verifiedGitHub (sven-n/MuMain) · 2026-10-28
  8. Narzędzia

    ServerList Editor: how to mark a server as Gold, Gold PVP, Non-PVP or Normal in ServerList.bmd

    1. Install .NET Framework 2.0 (x86 or x64) and open your ServerList.bmd with the editor (English language was added in update 1). 2. The table columns 1 to 15 are the server indexes insid...

    Opracowanie źródła przez MuADMINSNot verifiedRaGEZONE · 2012-02-18
  9. Konfiguracja serweraclassic

    How do I show sub servers grouped under one server in the list?

    1. In Connectserverlist.dat the codes are 0, 1, 2... 2. Change them to 0, 21, 41, 61 (steps of 20). 3. The ConnectServer then reads them as rooms of the servers.

    ✓ Potwierdzone przez autora tematuImperyus Games Brasil · 2010-12-14
  10. Konfiguracja serweraS2

    Season 2 files (KarLi tutorial): everything starts except GameServerCS, which fails

    1. Use your LAN address (192.168.x.x) only in MapServerInfo.dat and in the ConnectServer ServerList.dat. 2. Everywhere else in the server configs and the startup put 127.0.0.1. 3. In main...

    ✓ Potwierdzone przez autora tematuRaGEZONE · 2018-10-25
  11. Klient gryMuEmu / LouisS6

    'You are disconnected from the server' when selecting the server, after the IP was changed in many config files (MuEmu files).

    1. Put your IP only in ConnectServer/ServerList.dat and GameServer Data/MapServerInfo.dat. 2. Leave every other IP entry at 127.0.0.1. 3. If you use the antihack, open its port 55999. 4....

    ✓ Potwierdzone przez autora tematuTuServerMU · 2021-02-20
  12. NarzędziaSeason 4

    Pentium Tools / text.bmd (Season 4 client without serverlist.bmd): how to change the words shown next to each server, for example slow and fast

    1. Searching and editing the words in text.bmd alone did not change the list for the asker. 2. Give the server the code 20 both in the ConnectServer server list and in the ServerInfo file...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2017-08-21
  13. NarzędziaMuEmu / LouisSeason 6 Episode 3

    MagicHand: which client files hold the server names, skill names and other texts of a MuEmu S6E3 client

    1. Open the client files with MagicHand. 2. Skill names: Data/Local/Eng/skill_eng.bmd. 3. Server names in the server list: Data/Local/ServerList.bmd. 4. Other game texts: Data/Local/Eng/t...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2018-02-04
  14. Konfiguracja serweraclassic (MMT)

    New sub server (MMT files) gives a bind error and restarts.

    1. The sub server used the same port as the main one. 2. Give it its own port (for example 55903) and open it in the firewall. 3. Change its ServerCode in ServerList and MapServerInfo and...

    ✓ Potwierdzone przez autora tematuImperyus Games Brasil · 2009-10-30
  15. Konfiguracja serwera

    All servers start fine, but in game after pressing Connect it says "You are disconnected from the server"

    The ConnectServer files still had a wrong IP. 1. Edit these files and put your local IP in each: D:\MuServer\CS\Connectserverlist, D:\MuServer\CS\Data\Connectserverlist, D:\MuServer\CS\Da...

    ✓ Potwierdzone przez autora tematuDarksTeam · 2009-05-24
  16. Klient grySeason 6

    Two separate servers (not subservers) both show in the client as server 1 with the same name

    The client serverlist file was broken, not the server codes. 1. Replace the client Data serverlist.bmd with a working one (for example from another client of the same version) and edit th...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2021-06-18
  17. Klient gryS6

    How do I change the server name shown in the client server list?

    1. Season 6 clients: the name is in Client\Data\Local\ServerList.bmd. 2. Open it with MagicHand: Files BMD > ServerList > Edit File ServerList.bmd, load your file, edit the name and save....

    ✓ Potwierdzone przez autora tematuRaGEZONE · 2012-11-25
  18. Konfiguracja serweraMuEmu / LouisS8

    Two MuEmu S8 servers on one machine: the first works, the second disconnects at login although its ports (55902, 55920, 55961, 55971) are forwarded.

    1. Open the router page and check that the forwarding rules for the second server ports are really enabled, not only created. 2. If a rule turns itself off again after a refresh, delete i...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2020-06-17
  19. Konfiguracja serweraMuEmu / Louis0.97k

    ConnectServer Cross-Platform (MuEmu kayito): how do I build and run the ConnectServer natively on Linux?

    1. Install the build tools: on Ubuntu or Debian sudo apt install build-essential cmake libboost-all-dev (CentOS: gcc-c++ cmake boost-devel; Arch: base-devel cmake boost). On Windows use V...

    Opracowanie źródła przez MuADMINSNot verifiedGitHub (alisacorporation/ConnectServer) · 2025-11-02
  20. Klient gry

    The server select screen shows my server as 'Name-12'; how do I make it show 1?

    1. The number after the name is the GameServer code plus 1: code 11 in the ConnectServer server list shows as 12 in the client. That is normal. 2. Change the server code to 0 in the Conne...

    ✓ Potwierdzone przez autora tematuRaGEZONE · 2018-02-01

Filmy w MUTube

Więcej filmów dla „serverlist.dat”

Nadal masz problem? Zapytaj Asystenta MU Szukaj w MuGPS

MuADMINS Community Alpha: za darmo, tworzone przez społeczność, w aktywnym rozwoju.