Community AlphaAlpha MUADMINS
PLPolski
Zaloguj się
Na MuADMINSConfig ScannerWgraj zip swoich plików: rates, dropy, spoty, limityOtwórzNa MuADMINSSpotkajmy się na DiscordziePoproś o pomoc, pokaż, nad czym pracujesz, i rozmawiaj o MU z innymi właścicielami serwerów.Otwórz

MuADMINS

Rozwiązania

Krótkie poprawki częstych problemów z serwerem, klientem i stroną MU Online, każda ze źródłem i datą. “Potwierdzone” oznacza, że osoba, która pytała, potwierdziła, że poprawka zadziałała.

Rozwiązania: 26 dla “movereq(kor).txt” · Wyczyść

  1. Strona WWWWebZen 97d / 99b97d

    97d item hex: how to read the item type (group) and index from the hex code, as listed in item(kor).txt

    1. Take the first hex character as the type and the second as the index, and the 8th byte (hex characters 15 and 16) as the extra byte. 2. If the type is odd, add 16 to the index and subt...

    ✓ Potwierdzone przez autora tematuDarksTeam · 2018-09-28
  2. NarzędziaMuEmu / LouisS6

    MuEmu S6E3: after editing movereq_eng.bmd the M window lists the right maps but then breaks, although Move.txt matches

    1. The problem was the editor: MagicHand (and Pentium Tools) saved a damaged movereq_eng.bmd for this client. 2. Edit the file again with MU ToolKit Silver Edition and save it. 3. Keep th...

    ✓ Potwierdzone przez autora tematuRaGEZONE · 2018-02-20
  3. Rozgrywka

    Loch's Feather almost never drops (old GameServer with items(kor).txt), even though it is set as droppable

    1. The feather only drops naturally in Icarus and very rarely; the item line in items(kor).txt does not set its rate. 2. Add a custom line for it in itemdroprate.txt, as in the topic: 13...

    ✓ Potwierdzone przez autora tematuRaGEZONE · 2016-04-25
  4. NarzędziaWebZen 97d / 99b

    ENC MuOnline DB Editor (ENCGames): first setup, and why it cannot open item(kor).txt

    1. Start the .exe and point it to your server item(kor).txt: the editor builds its item list from that file, so custom items show up too. 2. Wait while it loads the items, then fill in yo...

    Opracowanie źródła przez MuADMINSNot verifiedRaGEZONE · 2011-07-01
  5. NarzędziaWebZen 97d / 99b1.02

    BMDdecoder: how to decode a client .bmd (text.bmd, item.bmd, movereq.bmd) to .txt and encode it back from the command line

    1. Copy the tool to a short folder, for example C:\b\bmddecoder.exe, and put the .bmd you want to edit in the same folder. 2. Open CMD and go to that folder (cd \ then cd b). 3. Decode: b...

    Opracowanie źródła przez MuADMINSNot verifiedRaGEZONE · 2007-04-24
  6. NarzędziaWebZen 97d / 99b

    Bmd to Txt Converter (IAT Group): how to turn the client Item.bmd into an Item(kor).txt style file and encode or decode Text.bmd

    1. Copy the client Item.bmd into the same folder as the converter. 2. Run the converter on Item.bmd: it writes an Items.txt laid out so it can be used directly as the server Item(kor).txt...

    Opracowanie źródła przez MuADMINSNot verifiedDarksTeam · 2010-05-21
  7. NarzędziaWebZen 97d / 99bS2, S4

    PBSoft ItemToCashShop 1.0: how to build CashShopList.txt from the server Item(kor).txt (Season 2 or Season 4)

    1. Open the program and use Arquivo > Carregar Item.txt to load your server item file. 2. In each category tab (Sword, Axes, Scepter, Spears, Staff, Shield and so on) set the Initial and...

    Opracowanie źródła przez MuADMINSNot verifiedImperyus Games Brasil · 2011-11-24
  8. NarzędziaInne plikiS6

    MoveReq.bmd: a map (Barracks) added at the bottom of the M list does not show in game (ENC Season 6)

    1. The client does not read new rows added to the end of movereq.bmd, and a movereq.bmd from other files can show as jumbled ASCII characters in a different client. 2. Instead of adding a...

    ✓ Potwierdzone przez autora tematuRaGEZONE · 2011-05-14
  9. NarzędziaInne plikiS6E3

    MagicHand: the M (move) window sends players to the wrong maps (Devias goes to Kanturu ...) with TitanTech 11.70.28 and a S6E3 client

    1. The client move list and the server move list do not match. The client reads Client/Data/Local/Eng/movereq_eng.bmd (not only movereq.bmd); the server reads MuServer/Data/lang/kor/MoveR...

    ✓ Potwierdzone przez autora tematuRaGEZONE · 2013-04-22
  10. NarzędziaInne plikiS6

    Pentium Tools: maps removed from move.txt still show in the warp (M) window (Flawless Emu S6)

    1. The warp window list comes from the client MoveReq.bmd, not from the server move file. 2. Open MoveReq.bmd with Pentium Tools (or MU S@nek Tools) and delete the row of the map; if the...

    ✓ Potwierdzone przez autora tematuRaGEZONE · 2024-10-27
  11. NarzędziaMuEmu / Louis

    ImportToEmu: editing a movereq.bmd that no other editor opens (MagicHand shows it blank) to change the level required per map

    1. On the server side the level per map is the MinLevel column of MuServer\Data\Move\Move.txt. 2. For the client file use ImportToEmu by Natzugen (TUServerMU topic 14368): it opens movere...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2018-06-24
  12. Klient gryMuEmu / LouisS6

    Flawless Emulator S6: maps removed from Data/Move/Move.txt still show in the warp command window (they just do not teleport).

    1. The warp window list comes from the client file MoveReq.bmd, not only the server Move.txt. 2. Open the client Data/Local MoveReq.bmd in a BMD editor and delete the map rows (or set the...

    ✓ Potwierdzone przez autora tematuRaGEZONE · 2024-10-28
  13. Klient gryInne plikiS5

    The M warp window shows unreadable names even though movereq.txt, movereq.bmd and gate files match (Avatar MU Season 5 files).

    Download the fixed Movereq.bmd from the files guide and replace the one in the client.

    ✓ Potwierdzone przez autora tematuRaGEZONE · 2011-07-12
  14. Klient gry

    Move.txt level requirements were changed but the M (move) window still shows the old levels.

    1. The client keeps its own copy in movereq bmd files per language in Data/Local (eng, spn, por). 2. Edit every language version to match Move.txt (ZFileManager worked; MagicHand did not...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2020-08-02
  15. NarzędziaInne plikiS8E2

    zFileManager 1.0.2.0: which zTeam Season 8 client files it converts to txt or xml and edits

    1. zFileManager (beta, by LockMU) supports the zTeam Season 8 Episode 2 files and converts client files to .txt or .xml in the zTeam format, with a built in editor and fast find and repla...

    Opracowanie źródła przez MuADMINSNot verifiedDarksTeam · 2014-10-31
  16. Narzędzia

    MagicHand 2.0 BETA: how to run it and convert client BMD files for the server (archivos/txt folder)

    1. MagicHand is a web editor written in PHP5, not a desktop program: install AppServ or XAMPP and open it in any browser except Internet Explorer. 2. It edits the client BMD files (from B...

    Opracowanie źródła przez MuADMINSNot verifiedImperyus Games Brasil · 2010-08-14
  17. NarzędziaWebZen 97d / 99bS1-S4

    Pentium Tools 1.06: which client files it edits and converts (Text, Gate, MoveReq, OZJ/OZT, bmd to smd)

    1. Table editors for Text.bmd (also Unicode TextW.bmd), Gate.bmd and MoveReq.bmd from Season 1 to Season 4 clients, with find, replace, filter, sort, undo and a compare mode that highligh...

    Opracowanie źródła przez MuADMINSNot verifiedRaGEZONE · 2008-08-22
  18. NarzędziaWebZen 97d / 99b0.97 / 0.99

    MuEditor 2.1 (0.97 / 0.99 versions): how to get the item id the editor needs (Blood Castle entry 13 18 shows as B2)

    1. Take the item type and index from item(kor).txt, for example 13 18. 2. In these versions each type has 32 items, so the number is type x 32 + index: 13 x 32 + 18 = 434. 3. Convert it t...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2020-06-26
  19. Konfiguracja serweraclassic

    Custom items vanish when entering the Castle Siege map.

    1. The GS-CS Data folder had an older item(kor).txt without the new items. 2. Copy the same item file into the Data folder of every GameServer, GS-CS and sub servers. 3. Restart.

    ✓ Potwierdzone przez autora tematuImperyus Games Brasil · 2011-10-24
  20. Rozgrywkaclassic

    Moving to Lorencia with M lands on the wrong coordinates (inside the castle area).

    1. Find the gate number of that move in the client movereq. 2. Edit its coordinates in the server Gate.txt (and Gate.bmd in the client if needed). 3. The asker only needed to change the c...

    ✓ Potwierdzone przez autora tematuImperyus Games Brasil · 2010-05-26
Nadal masz problem? Zapytaj Asystenta MU Szukaj w MuGPS Szukaj w MUTube

MuADMINS Community Alpha: za darmo, tworzone przez społeczność, w aktywnym rozwoju.