Community AlphaAlpha MUADMINS
PLPolski
Zaloguj się
Na MuADMINSConfig ScannerWgraj zip swoich plików: rates, dropy, spoty, limityOtwórzNa MuADMINSSpotkajmy się na DiscordziePoproś o pomoc, pokaż, nad czym pracujesz, i rozmawiaj o MU z innymi właścicielami serwerów.Otwórz

MuADMINS

Rozwiązania

Krótkie poprawki częstych problemów z serwerem, klientem i stroną MU Online, każda ze źródłem i datą. “Potwierdzone” oznacza, że osoba, która pytała, potwierdziła, że poprawka zadziałała.

Rozwiązania: 178 dla “game server does not start” · Wyczyść

  1. Konfiguracja serweraMSPro

    MSPro: GameServer does not open after a VPS restart or a move to a new VPS, and no error is shown

    The MSPro license is bound to the machine's HWID. A new VPS, or some VPS restarts, changes the HWID, and then the GameServer does not open and shows no error. 1. Request or regenerate the...

    ✓ Potwierdzone przez autora tematuNapisane przez MuADMINS · 2026-10-31
  2. NarzędziaOpenMU

    OpenMU admin panel: on a fresh install the client cannot reach the server selection. How do I start the listeners and add a game server?

    1. Open Servers (/servers). A fresh install does not start its listeners: start both connect servers and at least one game server. 2. To start them automatically, enable *Auto Start* in t...

    Opracowanie źródła przez MuADMINSNot verifiedGitHub (MUnique/OpenMU) · 2026-10-17
  3. NarzędziaOpenMU

    OpenMU: after an update a game server stays stopped or the admin panel shows pending updates. How do I apply configuration updates?

    1. New versions bring changes to the game configuration data (monster stats, drop groups, plugin configurations, quests). They are not applied to your existing database by the software up...

    Opracowanie źródła przez MuADMINSNot verifiedGitHub (MUnique/OpenMU) · 2026-10-27
  4. Konfiguracja serwera

    "login server connect fail" when the server starts the GameServer

    The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...

    ✓ Potwierdzone przez autora tematuDarksTeam · 2009-11-04
  5. Konfiguracja serwera97d+99i

    GameServer error at start with DarkMaster 97d+99i Beta 13 files, fixed by turning off the EventChip server connection

    1. Open Data\commonserver.cfg. 2. Find EventChipServerConnect = 1 and change it to EventChipServerConnect = 0. 3. Restart the GameServer.

    ✓ Potwierdzone przez autora tematuDarksTeam · 2011-04-23
  6. Konfiguracja serwera

    GameServer starts normally but crashes after a few minutes

    1. First read the GameServer logs: a broken event (Blood Castle, Devil Square) can stop the GS. 2. In this case the events and the GameServer were fine: the culprit was the ConnectServer....

    ✓ Potwierdzone przez autora tematuDarksTeam · 2011-05-11
  7. Konfiguracja serweraX-TeamSeason 15

    X-Team Season 15 files (update 5): GameServer shows a message that something 'does not exist' and will not start

    The error is about the server code and the GameServer common file of the update. 1. Check the ServerCode is the same in ConnectServer\ConnectServer.txt, Data\MapServerInfo and the GameSer...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2020-08-15
  8. Konfiguracja serweraMuEmu / LouisSeason 6

    Legion Team (Rodrigo117) files: GameServerCS shows an error at start while the normal GameServer runs

    The common config of the GameServers was incomplete, so the normal GameServer and GameServerCS tried to use the same (wrong) port. 1. Open the common config file of each GameServer (norma...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2020-08-06
  9. Konfiguracja serwera0.97d

    Aminyuz 97d files: GameServer gives a conexion.ini connection error at start although all IPs are right (EventServer and Ranking open fine)

    The SQL login in the Aminyuz connection file was wrong. 1. Open C:\MuServer\Aminyuz\Conexion (the connection ini of these files). 2. In the [SQL] block set Usuario = sa (your SQL user), C...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2020-02-21
  10. Konfiguracja serweraS2

    Season 2 files (KarLi tutorial): everything starts except GameServerCS, which fails

    1. Use your LAN address (192.168.x.x) only in MapServerInfo.dat and in the ConnectServer ServerList.dat. 2. Everywhere else in the server configs and the startup put 127.0.0.1. 3. In main...

    ✓ Potwierdzone przez autora tematuRaGEZONE · 2018-10-25
  11. Konfiguracja serweraMuEmu / LouisS6

    MuEmu (compiled from source, antihack on): players are disconnected when moving to Crywolf and other GameServerCS maps, even with the CS port (55919) open.

    1. Open GameServer - Common of the GameServer(s). 2. Add the missing CustomerName and CustomerHardwareId lines (needed after compiling with the antihack enabled). 3. Restart GameServer an...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2019-01-02
  12. Konfiguracja serweraany

    My GameServer (port 55901 and up) sometimes fails to start because the port is already in use. How do I check the Windows dynamic port range?

    1. Since Windows Vista and Server 2008, outgoing connections use local ports 49152 to 65535 by default, which includes 55901, 55960, 55970. 2. Show the range: netsh int ipv4 show dynamicp...

    Opracowanie źródła przez MuADMINSNot verifiedMicrosoft Learn · 2026-02-12
  13. Konfiguracja serweraOpenMUany

    OpenMU in Docker: game servers keep reporting my public IP to the client and -resolveIP / RESOLVE_IP seem ignored. How do I set loopback or local?

    1. Open the admin panel and go to the game configuration, System section. 2. Change the IP Resolving setting (Public by default) to Loopback for same machine tests, Local for a LAN, or Cu...

    ✓ Potwierdzone w zgłoszeniuGitHub (MUnique/OpenMU) · 2026-02-13
  14. NarzędziaOpenMU

    OpenMU admin panel: how do I switch off a game feature, or run an event like Blood Castle or an invasion only on some game servers?

    1. Open Configuration, Plugins (/plugins) and filter by extension point, name or type. 2. Deactivate turns a plugin off, Activate turns it on again. Many plugins are core mechanics (packe...

    Opracowanie źródła przez MuADMINSNot verifiedGitHub (MUnique/OpenMU) · 2026-10-18
  15. NarzędziaOpenMU

    OpenMU admin panel: how do I change the experience rate for all servers or only for one game server?

    1. Go to Configuration, General and change Experience rate (and Master experience rate if you want). 2. Save. 3. Click Reload configuration and restart all game servers on the Servers pag...

    Opracowanie źródła przez MuADMINSNot verifiedGitHub (MUnique/OpenMU) · 2026-09-28
  16. Konfiguracja serweraany

    GameServer, DataServer or JoinServer will not start: MSVCR100.dll, MSVCP120.dll or VCRUNTIME140.dll is missing. Which runtime do I install?

    1. The number in the DLL name tells the Visual C++ version: 80 = 2005, 90 = 2008, 100 = 2010, 110 = 2012, 120 = 2013, 140 = 2015 to 2026. 2. Download the matching Visual C++ Redistributab...

    Opracowanie źródła przez MuADMINSNot verifiedMicrosoft Learn · 2025-12-03
  17. Konfiguracja serweraMuEmu / LouisS6

    Louis S6 Up13 GameServer window never opens, shows an error and fills the folder with .dmp files after editing configs.

    1. Restore the original Data folder; if the server starts, the bad file is in there. 2. Put your edited files back one by one, starting with the ones you changed, until it fails again. 3....

    ✓ Potwierdzone przez autora tematuTuServerMU · 2021-10-11
  18. Konfiguracja serweraOpenMUany

    OpenMU worked before, but after the PC ran for a while the game server cannot listen on 55901 or players cannot connect. Why?

    1. Ports 49152 to 65535 are the Windows dynamic range used for outgoing connections, so another process can already hold 55901 and up. 2. Newer OpenMU databases use 45901 to 45906 for gam...

    Opracowanie źródła przez MuADMINSNot verifiedGitHub (MUnique/OpenMU docs) · 2026-10-11
  19. NarzędziaOpenMUup to S6

    OpenMU Network Analyzer (MUnique): how to capture and read the packets between a MU client and a game server

    1. The analyzer is a proxy: it listens for the client, connects to the real server and forwards, decrypts and encrypts all traffic so you can read it. 2. Enter the local port it should li...

    Opracowanie źródła przez MuADMINSNot verifiedRaGEZONE · 2018-01-02
  20. RozgrywkaMuEmu / LouisSeason 6 (MuEmu)

    How do I remove the timed (expiring) starting items new characters get?

    1. Open MuServer/Data/Custom/CustomStartItem. 2. Remove or edit the starting item lines. 3. Restart the GameServer.

    ✓ Potwierdzone przez autora tematuCreandoMU · 2021-06-03
Nadal masz problem? Zapytaj Asystenta MU Szukaj w MuGPS Szukaj w MUTube

MuADMINS Community Alpha: za darmo, tworzone przez społeczność, w aktywnym rozwoju.