Community AlphaAlpha MUADMINS
PLPolski
Zaloguj się
Na MuADMINSConfig ScannerWgraj zip swoich plików: rates, dropy, spoty, limityOtwórzNa MuADMINSSpotkajmy się na DiscordziePoproś o pomoc, pokaż, nad czym pracujesz, i rozmawiaj o MU z innymi właścicielami serwerów.Otwórz

MuADMINS

Rozwiązania

Krótkie poprawki częstych problemów z serwerem, klientem i stroną MU Online, każda ze źródłem i datą. “Potwierdzone” oznacza, że osoba, która pytała, potwierdziła, że poprawka zadziałała.

Rozwiązania: 21 dla “44405” · Wyczyść

  1. Konfiguracja serwera

    How to change the ConnectServer port 44405, and login fails after changing it

    1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...

    ✓ Potwierdzone przez autora tematuDarksTeam · 2010-12-21
  2. Klient gryOpenMUany

    OpenMU: I start main.exe with the ClientLauncher pointing to 127.0.0.1:44405 and nothing happens, the server never sees a connection.

    1. The original client refuses 127.0.0.1. 2. Use another loopback address instead, usually 127.127.127.127, with port 44405. 3. Set it in the ClientLauncher (or in main.exe with a hex edi...

    ✓ Potwierdzone w zgłoszeniuGitHub (MUnique/OpenMU) · 2019-02-15
  3. Konfiguracja serwera

    Two servers (x100 and x10) on two different VPS: the client only shows one of them in the server list

    1. Let one ConnectServer (on VPS 1, the machine that runs the full server) send the server list for both: add both GameServers to its server list with their server code, IP and port. 2. G...

    ✓ Potwierdzone przez autora tematuRaGEZONE · 2024-12-10
  4. Konfiguracja serwera

    With the firewall turned on nobody can enter my server or my website; with it off they can

    The firewall blocks the server ports. 1. In the firewall allow (unblock) TCP 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Also allow port 80 for the website. 3....

    ✓ Potwierdzone przez autora tematuDarksTeam · 2012-07-14
  5. Konfiguracja serweraany

    How do I open the MU server ports (44405, 55901, 55919 and others) in Windows Firewall quickly and correctly?

    1. Open PowerShell as administrator on the server. 2. Create one inbound rule for all TCP ports, for example: New-NetFirewallRule -DisplayName "MU Server" -Direction Inbound -Protocol TCP...

    Opracowanie źródła przez MuADMINSNot verifiedMicrosoft Learn · 2025-05-14
  6. Narzędzia

    Zyth3 Launcher: the server status check always shows the server offline

    1. In the launcher config put the server address as yourdomain.com or a plain IP like 123.101.12.102. 2. Do not write it as a web address like http://domain.com. 3. If your ConnectServer...

    Opracowanie źródła przez MuADMINSNot verifiedRaGEZONE · 2015-03-13
  7. NarzędziaMuDevsS20

    MUDevs main Generator: how to set my own window title, IP, port, version and serial for the MuDevs S20 client (mu.devs file)

    1. The tool was made by reversing the free MuDevs S20.2.3 client; it writes a custom mu.devs file that the client reads. 2. Replace each default value with yours: the window title MU - Po...

    Opracowanie źródła przez MuADMINSNot verifiedRaGEZONE · 2026-07-28
  8. Narzędzia

    Mu Online Launcher (enemY, C#): how to set it up for old clients such as 97d and for Season 1 or newer clients

    1. Requirements: Windows 7 to 10 and .NET Framework 4.0 or newer. When the launcher does not start, the author's first check is the .NET Framework version and which MU version you test it...

    Opracowanie źródła przez MuADMINSNot verifiedDarksTeam · 2019-10-18
  9. NarzędziaS6E3

    P4F Launcher System 2.3 Lite: Run button greyed out, website box empty and error 12029; it only works with the LAN IP

    1. The update server UpdSrv (in the UpdSrv folder of the release) must be configured and running, or the launcher shows no site and no Run button. 2. In UpdSrv set Game File = your main e...

    ✓ Potwierdzone przez autora tematuRaGEZONE · 2013-06-03
  10. Konfiguracja serweraX-TeamS8

    X-Team MuEmu S8E3: players cannot get in because Mu Hack Protection shows an error, even with the usual ports open.

    1. Open the MHP port 55999 TCP in the firewall and router, besides 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Port 55557 does not need to be opened. 3. Check...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2017-04-21
  11. Klient gryMuEmu / Louisany

    The client says "You are disconnected from the server" although the IPs, ah.info and main.info look correct. Where should I look?

    1. Check that the basic ports are open: ConnectServer (44405) and GameServer (55901, 55919 for the CS server). 2. Open the client main.info settings again and check every value: IP, port...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2019-04-30
  12. Konfiguracja serweraMuEmu / LouisS6

    MuEmu S6 on a VPS: the client works inside the VPS, but from home it shows the antihack logo, says it could not connect and closes.

    1. When it works on the VPS itself but not from outside, the Windows Firewall of the VPS is the usual cause. 2. On the VPS, create inbound TCP allow rules for the ConnectServer port (4440...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2018-11-18
  13. Konfiguracja serweraSeason 18 Episode 2

    Client disconnects right after choosing the server (server on a VPS)

    The server list shows, so the ConnectServer port is open, but the client is dropped when it moves on to the GameServer: the GameServer port is closed somewhere. 1. Find the GameServer por...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2023-09-16
  14. Konfiguracja serweraMuEmu / Louis0.97k

    ConnectServer Cross-Platform (MuEmu kayito): how do I build and run the ConnectServer natively on Linux?

    1. Install the build tools: on Ubuntu or Debian sudo apt install build-essential cmake libboost-all-dev (CentOS: gcc-c++ cmake boost-devel; Arch: base-devel cmake boost). On Windows use V...

    Opracowanie źródła przez MuADMINSNot verifiedGitHub (alisacorporation/ConnectServer) · 2025-11-02
  15. Klient gryOpenMUS6

    MuOnline Clone (MuMono): 'Data path not found', or the client cannot connect to the server

    1. The client needs the Season 20 (1.20.61) client data for its assets but speaks the Season 6 protocol. 2. *Data path not found*: set DataPath in Client.Main/Constants.cs to your Data fo...

    Opracowanie źródła przez MuADMINSNot verifiedGitHub (bernatvadell/muonline) · 2026-01-08
  16. Narzędzia97d to S6

    MU Launcher C# (bulgarashi): how do I set the server IP and the auto update in the launcher config.ini?

    1. In Launcher/config.ini set ServerVersion: 0 for old versions like 97d, 1 for Season 1 and newer. 2. For old versions set ServerIP-Port=/u127.0.0.1 /p44405 with your IP and port. 3. Upl...

    Opracowanie źródła przez MuADMINSNot verifiedGitHub (bulgarashi/MU-Launcher-C-Sharp) · 2019-11-30
  17. NarzędziaWebZen 97d / 99b97d

    Aminyuz Launcher [97d] (Kitty): how to set it up with GeneradorArchivos, Configs.kitty and Conexion.ini

    1. Unpack the launcher and copy the files shown in the guide into your MU client. 2. Open GeneradorArchivos (in the Generador de Archivos folder) and enter: server web, server IP (numeric...

    Opracowanie źródła przez MuADMINSNot verifiedTUServerMU · 2019-10-13
  18. NarzędziaIGCN

    IGC.ToolKit: where to set the server IP, port, version and serial of an IGCN client (ServerInfo.xml to ServerInfo.bmd)

    1. Extract the game client on a normal PC (not on the Windows Server machine) and copy the content of \Client\Client Patch\ from the server package over it. 2. Open \Data\Local\ServerInfo...

    Opracowanie źródła przez MuADMINSNot verifiedIGCN · 2022-09-15
  19. Klient gryOpenMUany

    OpenMU: which connect server port should my client use, and why do I get disconnected right after choosing a server?

    1. Use port 44405 for the original client and 44406 for the open source client (sven-n/MuMain). 2. A disconnect right after server selection means the address reported by the IP resolver...

    Opracowanie źródła przez MuADMINSNot verifiedGitHub (MUnique/OpenMU docs) · 2026-08-23
  20. Konfiguracja serweraOpenMUany

    OpenMU worked before, but after the PC ran for a while the game server cannot listen on 55901 or players cannot connect. Why?

    1. Ports 49152 to 65535 are the Windows dynamic range used for outgoing connections, so another process can already hold 55901 and up. 2. Newer OpenMU databases use 45901 to 45906 for gam...

    Opracowanie źródła przez MuADMINSNot verifiedGitHub (MUnique/OpenMU docs) · 2026-10-11

Filmy w MUTube

Więcej filmów dla „44405”

Nadal masz problem? Zapytaj Asystenta MU Szukaj w MuGPS

MuADMINS Community Alpha: za darmo, tworzone przez społeczność, w aktywnym rozwoju.