Community AlphaAlpha MUADMINS
ITItaliano
Accedi
Su MuADMINSConfig ScannerCarica lo zip dei tuoi file: rates, drop, spot, limitiApriSu MuADMINSIncontraci su DiscordChiedi aiuto, condividi quello che stai creando e parla di MU con altri proprietari di server.Apri

MuADMINS

Soluzioni

Fix brevi per i problemi comuni di server, client e siti web di MU Online, ognuno con la sua fonte e la sua data. “Confermato” significa che chi ha fatto la domanda ha detto che il fix ha funzionato.

40 soluzioni per “connectserver port” · Azzera

  1. Setup del server

    How to change the ConnectServer port 44405, and login fails after changing it

    1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...

    ✓ Confermato dall'autore della discussioneDarksTeam · 2010-12-21
  2. Client di giocoOpenMUany

    OpenMU: which connect server port should my client use, and why do I get disconnected right after choosing a server?

    1. Use port 44405 for the original client and 44406 for the open source client (sven-n/MuMain). 2. A disconnect right after server selection means the address reported by the IP resolver...

    Riscrittura della fonte da parte di MuADMINSNot verifiedGitHub (MUnique/OpenMU docs) · 2026-08-23
  3. Setup del serverMuEmu / LouisS8

    Two MuEmu S8 servers on one machine: the first works, the second disconnects at login although its ports (55902, 55920, 55961, 55971) are forwarded.

    1. Open the router page and check that the forwarding rules for the second server ports are really enabled, not only created. 2. If a rule turns itself off again after a refresh, delete i...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2020-06-17
  4. StrumentiAltri file

    Launcher auto update (Titan Tech SCF ConnectServer) never downloads the patch from a hosting FTP account

    1. The update FTP is set in the ConnectServer SCF_Config.ini, sections [FtpServerInfo] and [HttpServerInfo] (SCFAddress, SCFPort, SCFID, SCFPASS), with SCFClientVersion and SCFVersionFile...

    ✓ Confermato dall'autore della discussioneRaGEZONE · 2015-02-23
  5. Setup del serverX-TeamS8

    X-Team MuEmu S8E3: players cannot get in because Mu Hack Protection shows an error, even with the usual ports open.

    1. Open the MHP port 55999 TCP in the firewall and router, besides 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Port 55557 does not need to be opened. 3. Check...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2017-04-21
  6. Setup del serverany

    Server on my home PC works for me with the IPv4 address, but friends get disconnected even with ports added to firewall and router. What is wrong?

    1. A private (LAN) address like 192.168.x.x only works inside your own network. 2. For outside players, put your public IP (or a No-IP hostname) in the server side IP settings (ConnectSer...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2019-05-03
  7. Setup del serverMuEmu / Louis0.97k

    ConnectServer Cross-Platform (MuEmu kayito): how do I build and run the ConnectServer natively on Linux?

    1. Install the build tools: on Ubuntu or Debian sudo apt install build-essential cmake libboost-all-dev (CentOS: gcc-c++ cmake boost-devel; Arch: base-devel cmake boost). On Windows use V...

    Riscrittura della fonte da parte di MuADMINSNot verifiedGitHub (alisacorporation/ConnectServer) · 2025-11-02
  8. Setup del serverS2

    Client disconnects after choosing the server; the client log shows it connecting to someone else's IP (10.0.0.33, port 55901) with Pinkof Season 2 files

    The server files and the client still pointed to the IP of the person who packed them. 1. Put your own IP in the ConnectServer server list config. 2. Put your own IP in the JoinServer con...

    ✓ Confermato dall'autore della discussioneDarksTeam · 2015-02-13
  9. Setup del serverSeason 18 Episode 2

    Client disconnects right after choosing the server (server on a VPS)

    The server list shows, so the ConnectServer port is open, but the client is dropped when it moves on to the GameServer: the GameServer port is closed somewhere. 1. Find the GameServer por...

    ✓ Confermato dall'autore della discussioneTUServerMU · 2023-09-16
  10. Setup del serverany

    My GameServer (port 55901 and up) sometimes fails to start because the port is already in use. How do I check the Windows dynamic port range?

    1. Since Windows Vista and Server 2008, outgoing connections use local ports 49152 to 65535 by default, which includes 55901, 55960, 55970. 2. Show the range: netsh int ipv4 show dynamicp...

    Riscrittura della fonte da parte di MuADMINSNot verifiedMicrosoft Learn · 2026-02-12
  11. Setup del server

    Two servers (x100 and x10) on two different VPS: the client only shows one of them in the server list

    1. Let one ConnectServer (on VPS 1, the machine that runs the full server) send the server list for both: add both GameServers to its server list with their server code, IP and port. 2. G...

    ✓ Confermato dall'autore della discussioneRaGEZONE · 2024-12-10
  12. Client di giocoOpenMUS6

    MuOnline Clone (MuMono): 'Data path not found', or the client cannot connect to the server

    1. The client needs the Season 20 (1.20.61) client data for its assets but speaks the Season 6 protocol. 2. *Data path not found*: set DataPath in Client.Main/Constants.cs to your Data fo...

    Riscrittura della fonte da parte di MuADMINSNot verifiedGitHub (bernatvadell/muonline) · 2026-01-08
  13. Strumenti

    Zyth3 Launcher: the server status check always shows the server offline

    1. In the launcher config put the server address as yourdomain.com or a plain IP like 123.101.12.102. 2. Do not write it as a web address like http://domain.com. 3. If your ConnectServer...

    Riscrittura della fonte da parte di MuADMINSNot verifiedRaGEZONE · 2015-03-13
  14. Setup del serverclassic (MMT)

    New sub server (MMT files) gives a bind error and restarts.

    1. The sub server used the same port as the main one. 2. Give it its own port (for example 55903) and open it in the firewall. 3. Change its ServerCode in ServerList and MapServerInfo and...

    ✓ Confermato dall'autore della discussioneImperyus Games Brasil · 2009-10-30
  15. Setup del server

    How to protect the server from attackers with the firewall

    Only the ConnectServer and GameServer must be reachable from outside. 1. In the firewall block outside access for: MySQL (mysqld.exe), the DataServer(s), ExDB, EventServer, RankingServer,...

    ✓ Confermato dall'autore della discussioneDarksTeam · 2008-06-30
  16. Setup del server

    With the firewall turned on nobody can enter my server or my website; with it off they can

    The firewall blocks the server ports. 1. In the firewall allow (unblock) TCP 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Also allow port 80 for the website. 3....

    ✓ Confermato dall'autore della discussioneDarksTeam · 2012-07-14
  17. Setup del serverS3E1 (1.04H)

    GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)

    The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...

    ✓ Confermato dall'autore della discussioneDarksTeam · 2008-06-03
  18. Setup del serverMuEmu / LouisS6

    Friends can join my MuEmu S6 server from outside, but I cannot connect from another PC in the same LAN as the server. Which port is missing?

    1. It is usually not a port: many routers do not let LAN PCs reach their own public IP (no NAT loopback). 2. Use a No-IP hostname as the server address in the ConnectServer server list, m...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2020-07-14
  19. StrumentiIGCN

    IGC.ToolKit: where to set the server IP, port, version and serial of an IGCN client (ServerInfo.xml to ServerInfo.bmd)

    1. Extract the game client on a normal PC (not on the Windows Server machine) and copy the content of \Client\Client Patch\ from the server package over it. 2. Open \Data\Local\ServerInfo...

    Riscrittura della fonte da parte di MuADMINSNot verifiedIGCN · 2022-09-15
  20. Strumenti

    [P4F] Launcher System 0.9.1 (free): how to make it start a main.exe that needs the server IP and port as parameters

    1. The free P4F launcher (Launcher System 0.9.1 by Killbrum, with auto update) works with any MU version; its settings editor saves the configuration in its own format so players cannot r...

    Riscrittura della fonte da parte di MuADMINSNot verifiedDarksTeam · 2021-12-15
Non hai ancora risolto? Chiedi all'Assistente MU Cerca su MuGPS Cerca su MUTube

MuADMINS Community Alpha: gratuito, fatto dalla community, in sviluppo attivo.