Community AlphaAlpha MUADMINS
ITItaliano
Accedi
Su MuADMINSConfig ScannerCarica lo zip dei tuoi file: rates, drop, spot, limitiApriSu MuADMINSIncontraci su DiscordChiedi aiuto, condividi quello che stai creando e parla di MU con altri proprietari di server.Apri

MuADMINS

Soluzioni

Fix brevi per i problemi comuni di server, client e siti web di MU Online, ognuno con la sua fonte e la sua data. “Confermato” significa che chi ha fatto la domanda ha detto che il fix ha funzionato.

21 soluzioni per “44405” · Azzera

  1. Setup del server

    How to change the ConnectServer port 44405, and login fails after changing it

    1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...

    ✓ Confermato dall'autore della discussioneDarksTeam · 2010-12-21
  2. Client di giocoOpenMUany

    OpenMU: I start main.exe with the ClientLauncher pointing to 127.0.0.1:44405 and nothing happens, the server never sees a connection.

    1. The original client refuses 127.0.0.1. 2. Use another loopback address instead, usually 127.127.127.127, with port 44405. 3. Set it in the ClientLauncher (or in main.exe with a hex edi...

    ✓ Confermato nella issueGitHub (MUnique/OpenMU) · 2019-02-15
  3. Setup del server

    Two servers (x100 and x10) on two different VPS: the client only shows one of them in the server list

    1. Let one ConnectServer (on VPS 1, the machine that runs the full server) send the server list for both: add both GameServers to its server list with their server code, IP and port. 2. G...

    ✓ Confermato dall'autore della discussioneRaGEZONE · 2024-12-10
  4. Setup del server

    With the firewall turned on nobody can enter my server or my website; with it off they can

    The firewall blocks the server ports. 1. In the firewall allow (unblock) TCP 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Also allow port 80 for the website. 3....

    ✓ Confermato dall'autore della discussioneDarksTeam · 2012-07-14
  5. Setup del serverany

    How do I open the MU server ports (44405, 55901, 55919 and others) in Windows Firewall quickly and correctly?

    1. Open PowerShell as administrator on the server. 2. Create one inbound rule for all TCP ports, for example: New-NetFirewallRule -DisplayName "MU Server" -Direction Inbound -Protocol TCP...

    Riscrittura della fonte da parte di MuADMINSNot verifiedMicrosoft Learn · 2025-05-14
  6. Strumenti

    Zyth3 Launcher: the server status check always shows the server offline

    1. In the launcher config put the server address as yourdomain.com or a plain IP like 123.101.12.102. 2. Do not write it as a web address like http://domain.com. 3. If your ConnectServer...

    Riscrittura della fonte da parte di MuADMINSNot verifiedRaGEZONE · 2015-03-13
  7. StrumentiMuDevsS20

    MUDevs main Generator: how to set my own window title, IP, port, version and serial for the MuDevs S20 client (mu.devs file)

    1. The tool was made by reversing the free MuDevs S20.2.3 client; it writes a custom mu.devs file that the client reads. 2. Replace each default value with yours: the window title MU - Po...

    Riscrittura della fonte da parte di MuADMINSNot verifiedRaGEZONE · 2026-07-28
  8. Strumenti

    Mu Online Launcher (enemY, C#): how to set it up for old clients such as 97d and for Season 1 or newer clients

    1. Requirements: Windows 7 to 10 and .NET Framework 4.0 or newer. When the launcher does not start, the author's first check is the .NET Framework version and which MU version you test it...

    Riscrittura della fonte da parte di MuADMINSNot verifiedDarksTeam · 2019-10-18
  9. StrumentiS6E3

    P4F Launcher System 2.3 Lite: Run button greyed out, website box empty and error 12029; it only works with the LAN IP

    1. The update server UpdSrv (in the UpdSrv folder of the release) must be configured and running, or the launcher shows no site and no Run button. 2. In UpdSrv set Game File = your main e...

    ✓ Confermato dall'autore della discussioneRaGEZONE · 2013-06-03
  10. Setup del serverX-TeamS8

    X-Team MuEmu S8E3: players cannot get in because Mu Hack Protection shows an error, even with the usual ports open.

    1. Open the MHP port 55999 TCP in the firewall and router, besides 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Port 55557 does not need to be opened. 3. Check...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2017-04-21
  11. Client di giocoMuEmu / Louisany

    The client says "You are disconnected from the server" although the IPs, ah.info and main.info look correct. Where should I look?

    1. Check that the basic ports are open: ConnectServer (44405) and GameServer (55901, 55919 for the CS server). 2. Open the client main.info settings again and check every value: IP, port...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2019-04-30
  12. Setup del serverMuEmu / LouisS6

    MuEmu S6 on a VPS: the client works inside the VPS, but from home it shows the antihack logo, says it could not connect and closes.

    1. When it works on the VPS itself but not from outside, the Windows Firewall of the VPS is the usual cause. 2. On the VPS, create inbound TCP allow rules for the ConnectServer port (4440...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2018-11-18
  13. Setup del serverSeason 18 Episode 2

    Client disconnects right after choosing the server (server on a VPS)

    The server list shows, so the ConnectServer port is open, but the client is dropped when it moves on to the GameServer: the GameServer port is closed somewhere. 1. Find the GameServer por...

    ✓ Confermato dall'autore della discussioneTUServerMU · 2023-09-16
  14. Setup del serverMuEmu / Louis0.97k

    ConnectServer Cross-Platform (MuEmu kayito): how do I build and run the ConnectServer natively on Linux?

    1. Install the build tools: on Ubuntu or Debian sudo apt install build-essential cmake libboost-all-dev (CentOS: gcc-c++ cmake boost-devel; Arch: base-devel cmake boost). On Windows use V...

    Riscrittura della fonte da parte di MuADMINSNot verifiedGitHub (alisacorporation/ConnectServer) · 2025-11-02
  15. Client di giocoOpenMUS6

    MuOnline Clone (MuMono): 'Data path not found', or the client cannot connect to the server

    1. The client needs the Season 20 (1.20.61) client data for its assets but speaks the Season 6 protocol. 2. *Data path not found*: set DataPath in Client.Main/Constants.cs to your Data fo...

    Riscrittura della fonte da parte di MuADMINSNot verifiedGitHub (bernatvadell/muonline) · 2026-01-08
  16. Strumenti97d to S6

    MU Launcher C# (bulgarashi): how do I set the server IP and the auto update in the launcher config.ini?

    1. In Launcher/config.ini set ServerVersion: 0 for old versions like 97d, 1 for Season 1 and newer. 2. For old versions set ServerIP-Port=/u127.0.0.1 /p44405 with your IP and port. 3. Upl...

    Riscrittura della fonte da parte di MuADMINSNot verifiedGitHub (bulgarashi/MU-Launcher-C-Sharp) · 2019-11-30
  17. StrumentiWebZen 97d / 99b97d

    Aminyuz Launcher [97d] (Kitty): how to set it up with GeneradorArchivos, Configs.kitty and Conexion.ini

    1. Unpack the launcher and copy the files shown in the guide into your MU client. 2. Open GeneradorArchivos (in the Generador de Archivos folder) and enter: server web, server IP (numeric...

    Riscrittura della fonte da parte di MuADMINSNot verifiedTUServerMU · 2019-10-13
  18. StrumentiIGCN

    IGC.ToolKit: where to set the server IP, port, version and serial of an IGCN client (ServerInfo.xml to ServerInfo.bmd)

    1. Extract the game client on a normal PC (not on the Windows Server machine) and copy the content of \Client\Client Patch\ from the server package over it. 2. Open \Data\Local\ServerInfo...

    Riscrittura della fonte da parte di MuADMINSNot verifiedIGCN · 2022-09-15
  19. Client di giocoOpenMUany

    OpenMU: which connect server port should my client use, and why do I get disconnected right after choosing a server?

    1. Use port 44405 for the original client and 44406 for the open source client (sven-n/MuMain). 2. A disconnect right after server selection means the address reported by the IP resolver...

    Riscrittura della fonte da parte di MuADMINSNot verifiedGitHub (MUnique/OpenMU docs) · 2026-08-23
  20. Setup del serverOpenMUany

    OpenMU worked before, but after the PC ran for a while the game server cannot listen on 55901 or players cannot connect. Why?

    1. Ports 49152 to 65535 are the Windows dynamic range used for outgoing connections, so another process can already hold 55901 and up. 2. Newer OpenMU databases use 45901 to 45906 for gam...

    Riscrittura della fonte da parte di MuADMINSNot verifiedGitHub (MUnique/OpenMU docs) · 2026-10-11

Video su MUTube

Altri video per “44405”

Non hai ancora risolto? Chiedi all'Assistente MU Cerca su MuGPS

MuADMINS Community Alpha: gratuito, fatto dalla community, in sviluppo attivo.