Community AlphaAlpha MUADMINS
ITItaliano
Accedi
Su MuADMINSConfig ScannerCarica lo zip dei tuoi file: rates, drop, spot, limitiApriSu MuADMINSIncontraci su DiscordChiedi aiuto, condividi quello che stai creando e parla di MU con altri proprietari di server.Apri

MuADMINS

Soluzioni

Fix brevi per i problemi comuni di server, client e siti web di MU Online, ognuno con la sua fonte e la sua data. “Confermato” significa che chi ha fatto la domanda ha detto che il fix ha funzionato.

588 soluzioni per “server.xml” · Azzera

  1. Setup del serverMuEmu / LouisS4

    MuEmu S4: the server and MuMaker do not see the databases on SQL Server 2008 R2 even with remote connections and TCP/IP enabled.

    1. Check how SQL Server was installed: it had been set up as a named instance. 2. The files and MuMaker expect the default instance, reached as (local) or the PC name. 3. Reinstall SQL Se...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2017-11-11
  2. Setup del serverany

    During SQL Server setup the password for sa is rejected no matter what I type. Why?

    1. Setup enforces the Windows password policy on the sa password. 2. Use at least 8 characters that mix uppercase letters, lowercase letters and numbers (a symbol helps too). 3. Do not us...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2017-07-21
  3. Setup del serverMuEmu / LouisS6

    MuEmu S6 (KoshGames/Louis) on SQL Server Express 2012: JoinServer says "Could not connect to database" although MuOnline is restored and the .reg files were run.

    1. SQL Express installs a named instance, usually SQLEXPRESS, so (local) alone does not reach it. 2. Open the ODBC admin for your Windows bits and create the DSNs by hand. 3. In the serve...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2020-08-08
  4. Strumentiany

    SQL Server Management Studio shows "Value cannot be null. Parameter name: viewInfo" when opening Databases on the MU server. What causes it?

    1. Check the free space on the drive where Windows, SQL Server and its temp folder live. 2. In this case the disk was full. 3. Free space: clear temp folders, old server logs and old back...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2019-06-19
  5. Setup del serverAltri fileS2

    Season 2 files on SQL Server 2000: after creating the MuOnline database with the query, DataServer shows a database error. What was wrong?

    1. Run the database creation query in Query Analyzer logged in as sa, without selecting another database first. 2. Check the ODBC admin: the files' ODBC.reg had created the entries under...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2017-03-23
  6. Setup del serverWebZen 97d / 99b97d

    DarksTeam 97d+99i on Windows 10 64-bit: servers say they cannot connect to SQL after installing SQL 2008. Editing the ODBC .reg did not help.

    1. Uninstall the SQL Server 2008 instance that was installed with Windows authentication only. 2. Reinstall it choosing Mixed Mode and give sa a password. 3. Restore the MuOnline database...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2018-08-05
  7. Setup del serverany

    SQL Server 2012 installed without errors but SQL Server Agent will not start (Browser starts fine) when preparing MU files. What fixed it?

    1. In services.msc set SQL Server Agent to Automatic and try to start it. 2. If it still fails, the instance was installed with the wrong authentication choice. 3. Reinstall SQL Server an...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2018-11-19
  8. Setup del serverWebZen 97d / 99b97d

    SQL 2000 will not install on Windows 7, so how do I run DarksTeam 97d files on SQL Server 2008 R2 instead?

    1. Install SQL Server 2008 R2 and set a password for sa during setup (do not skip it). 2. Restore the MuOnline database from the files. 3. Open the ODBC admin (32-bit one on 64-bit Window...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2018-08-06
  9. Setup del serverWebZen 97d / 99b97d

    Files 97D MBT: the first DataServer opens but DataServer2 hangs and then shows an error on start. How to fix it?

    1. Start the servers from the shortcuts in the Link folder that ships with the files. 2. Open the DataServer2 folder and edit wz_update.ini. 3. Change SkipUpdate=0 to SkipUpdate=1 and sav...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2018-06-16
  10. Setup del serverWebZen 97d / 99b99b

    Files 99B DarksTeam on Windows 7: MuServer startup throws an ODBC error even with the 64-bit ODBC .reg applied. How was it solved?

    1. Use the ODBC .reg (or manual DSN) that matches your Windows: 32-bit or 64-bit. 2. Make sure the databases were created or restored in SQL Server. 3. Right click the startup shortcuts (...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2018-06-16
  11. Setup del serverMuEmu / LouisS6

    MuEmu S6 DataServer and JoinServer show "Could not connect to database" on SQL 2008 R2 even after renaming MuOnlineS6 to MuOnline. What fixed it?

    1. In the DataServer and JoinServer config files make sure the database name is the one you restored (MuOnline, not MuOnlineS6). 2. Delete the old or duplicate MuOnline DSNs and create th...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2018-06-06
  12. Setup del serverWebZen 97d / 99bS6

    zTeam S6E3 (Exodus) files: JoinServer shows an error on start.

    1. Do not open JoinServer.exe directly. 2. Start it from a shortcut with parameters, for example /p55970 /ca127.0.0.1 /cp55557, or use the startup tool that comes with the files.

    ✓ Confermato dall'autore della discussioneTuServerMU · 2016-10-29
  13. Setup del serverMuEmu / LouisS6

    MuEmu (compiled from source, antihack on): players are disconnected when moving to Crywolf and other GameServerCS maps, even with the CS port (55919) open.

    1. Open GameServer - Common of the GameServer(s). 2. Add the missing CustomerName and CustomerHardwareId lines (needed after compiling with the antihack enabled). 3. Restart GameServer an...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2019-01-02
  14. Setup del serverIGCNS9

    IGCN Season 9 repack: GameServerCS shows an error when Castle Siege is configured, even with correct settings.

    1. The SQL Server language caused it. 2. Install SQL Server in English (English instance) and restore the databases there. 3. Start GameServerCS again.

    ✓ Confermato dall'autore della discussioneTuServerMU · 2017-06-18
  15. Setup del serverIGCNS9

    IGC DataServer stays on its loading window and never finishes starting.

    1. Check the ODBC/SQL settings of the DataServer. 2. The SQL instance name was wrong. When SQL Server is on the same PC use (local) as the instance/host. 3. Start the DataServer again.

    ✓ Confermato dall'autore della discussioneTuServerMU · 2017-04-21
  16. Client di giocoIGCNS12

    IGCN Season 12: the server runs, but after loading the client says the game needs to be updated.

    1. Open IGCData/IGC_MapServerInfo.xml on the server and read the client version and serial. 2. Put the same IP, version and serial in the client info editor (serverinfo generator). 3. Gen...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2019-04-06
  17. Sito webany

    WebEngine 1.2.0 shows a server time that is not in sync with the Windows server time.

    1. Open includes/config/timezone.php. 2. Set the timezone that matches your game server. 3. Save and reload the site.

    ✓ Confermato dall'autore della discussioneRaGEZONE · 2019-05-09
  18. Setup del serverMuEmu / LouisS9, S17

    The open source C# MuEmu project (Yomalex) shows a startup error and the game server does not start.

    1. Copy the Data folder from the repository into the same folder as the MuEmu binary. 2. Make the APIKey in MuEmu Server.xml equal to the apiKey in the CSEmu configuration.xml (example: a...

    ✓ Confermato nella issueGitHub (Yomalex/MuEmu) · 2024-09-14
  19. Gameplay

    How to limit a sub server so only characters within a reset range can enter?

    1. Open GameServer/DATA/Common for that sub server. 2. Set ServerMinReset and ServerMaxReset (ServerMinLevel and ServerMaxLevel work the same way for level). 3. Restart that GameServer.

    ✓ Confermato dall'autore della discussioneTuServerMU · 2020-08-06
  20. Client di giocoMuEmu / LouisS6

    'You are disconnected from the server' when selecting the server, after the IP was changed in many config files (MuEmu files).

    1. Put your IP only in ConnectServer/ServerList.dat and GameServer Data/MapServerInfo.dat. 2. Leave every other IP entry at 127.0.0.1. 3. If you use the antihack, open its port 55999. 4....

    ✓ Confermato dall'autore della discussioneTuServerMU · 2021-02-20

MuADMINS Community Alpha: gratuito, fatto dalla community, in sviluppo attivo.