Community AlphaAlpha MUADMINS
FRFrançais
Connexion
Sur MuADMINSConfig ScannerDéposez le zip de vos fichiers : rates, drops, spots, limitesOuvrirSur MuADMINSRetrouvez-nous sur DiscordDemandez de l'aide, partagez ce que vous créez et parlez de MU avec d'autres propriétaires de serveurs.Ouvrir

MuADMINS

Solutions

Des correctifs courts pour les problèmes courants de serveur, de client et de site web MU Online, chacun avec sa source et sa date. “Confirmé” signifie que la personne qui a posé la question a indiqué que le correctif a fonctionné.

38 solutions pour “connect failed” · Effacer

  1. Installation du serveurIGCNS9

    IGCN S9 E2 repack: DataServer says 'Login failed for user ...' (SQLSTATE 28000) and 'DATA SERVER CANNOT CONNECT TO MSSQL'

    1. The repack DataServer config came with a SQL login that does not exist on your SQL Server (here a random name like D2a78Rtko0), so the login fails. 2. Open the database settings of the...

    ✓ Confirmé par l'auteur du sujetRaGEZONE · 2019-07-14
  2. OutilsWebZen 97d / 99b97d

    MuEditor 2.1 / MuMaker: 'SQL Connection failed' with a 97d+99i server, even when run as administrator

    1. Running the editor as administrator did not help. 2. The editors connect through the ODBC data sources of the server (MuOnline, MuOnlineJoinDB and so on), so these must be registered c...

    ✓ Confirmé par l'auteur du sujetDarksTeam · 2016-05-07
  3. Installation du serveurIGCN

    IGCN License Manager: what the GameServer license errors mean (Cannot connect to Auth Server, Time Check Failed, IP Address or HWID not found, Activation Time is over)

    1. Cannot connect to Auth Server (first connect) or Failed to connect to any of auth servers (reconnect): check that the subscription is active, that the IPs in the license data on the Li...

    Réécriture de la source par MuADMINSNot verifiedIGCN · 2022-03-28
  4. Client de jeuMuEmu / LouisS5.2

    Main 5.2 (Louis) with MuServer Update 15: 'WriteValidation > ProtocolSend Connect [0] Read Header Fail:End of file' when the client connects

    1. The asker fixed it (with help from son1xx2 on RaGEZONE) by building both the GameServer and the main without the new protocol system. 2. In the server source set #define NEW_PROTOCOL_S...

    ✓ Confirmé dans l'issueGitHub (LouisEmulator/Main5.2) · 2022-11-23
  5. Installation du serveurS3E1 (1.04H)

    GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)

    The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...

    ✓ Confirmé par l'auteur du sujetDarksTeam · 2008-06-03
  6. Installation du serveur

    "login server connect fail" when the server starts the GameServer

    The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...

    ✓ Confirmé par l'auteur du sujetDarksTeam · 2009-11-04
  7. Gameplay

    Players are disconnected inside Blood Castle; the GameServer log shows 'create monster fail - wrong map [173]'

    1. The Blood Castle monsters in the monster spawn XML were edited and some entries point to map code 173, which does not exist, so spawning them fails and players are dropped. 2. Revert e...

    ✓ Confirmé par l'auteur du sujetRaGEZONE · 2024-02-14
  8. Client de jeuSeason 6

    "Connect Failed" when you start the client on the PC that runs the server (No-IP address)

    With a No-IP (dynamic DNS) name in the client, players outside can connect, but the PC that runs the server often cannot, because most home routers do not route your public address back i...

    ✓ Confirmé par l'auteur du sujetTUServerMU · 2021-04-15
  9. Outils

    MuCore install: "Connection with MuOnline Database Failed" and "Extension php_mssql.dll must be enabled"

    1. MuCore needs a PHP that still has the old php_mssql.dll extension: in php.ini find extension=php_mssql.dll and remove the ; in front of it. 2. If your web server package has no php_mss...

    ✓ Confirmé par l'auteur du sujetRaGEZONE · 2011-03-05
  10. Outils

    MuMaker: "Login failed for user 'sa'. Reason: Not associated with a trusted SQL Server connection."

    1. The error means SQL Server only accepts Windows logins, so the sa login that MuMaker uses is refused. 2. Change the SQL Server authentication to SQL Server and Windows Authentication m...

    ✓ Confirmé par l'auteur du sujetRaGEZONE · 2008-01-29
  11. Installation du serveur0.97d

    97d GameServer on a VPS says 'Failed to connect to SQL Server' although the SQL login, the MuOnline database and the IPs look correct

    The database and the SQL settings were fine; the IP passed to GameServer.exe in its shortcut was the problem. 1. Right-click the GameServer.exe shortcut you start the server with and open...

    ✓ Confirmé par l'auteur du sujetTUServerMU · 2021-02-08
  12. Installation du serveur

    How to change the ConnectServer port 44405, and login fails after changing it

    1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...

    ✓ Confirmé par l'auteur du sujetDarksTeam · 2010-12-21
  13. Site webany

    MuCore 2.2.0 installer stops with 'SQL Failed' at the connection step.

    1. Open TCP port 1433 in the Windows firewall. 2. In SQL Server Configuration Manager enable Named Pipes and TCP/IP, set IPAll TCP Port 1433. 3. Restart SQL Server and run the installer a...

    ✓ Confirmé par l'auteur du sujetTuServerMU · 2019-07-27
  14. OutilsWebZen 97d / 99b1.02-1.03

    main.exe hex edit: how to change the serial and the connect IP of an old main (1.02 / 1.03 era) with a hex editor

    1. Open main.exe in a hex editor, press Ctrl+F, tick Find ASCII and search failed to connect: the 16 character serial is next to it. 2. Replace the serial with your own using exactly 16 c...

    Réécriture de la source par MuADMINSNot verifiedRaGEZONE · 2007-08-19
  15. Installation du serveurMuEmu / LouisS6

    MuEmu S6 on a VPS: the client works inside the VPS, but from home it shows the antihack logo, says it could not connect and closes.

    1. When it works on the VPS itself but not from outside, the Windows Firewall of the VPS is the usual cause. 2. On the VPS, create inbound TCP allow rules for the ConnectServer port (4440...

    ✓ Confirmé par l'auteur du sujetTuServerMU · 2018-11-18
  16. Site webany

    WebEngine 1.0.9 with a remote SQL Server IP fails with 'Could not connect to database (1)', while MuCore connects to the same server without problems.

    1. In the WebEngine installer select the ODBC driver instead of dblib/sqlsrv. 2. Make sure the matching PHP ODBC extension is enabled and port 1433 is reachable. 3. Finish the install.

    ✓ Confirmé par l'auteur du sujetRaGEZONE · 2017-09-09
  17. OutilsS6

    WebEngine CMS installer: "Could not connect to database (1)" at the database step with MSSQL Server 2008 (PDO ODBC, XAMPP)

    1. In this case the game files connected fine but the WebEngine installer kept failing on the database step, with no error in the SQL logs or the Windows event log. 2. The cause was a con...

    ✓ Confirmé par l'auteur du sujetRaGEZONE · 2023-10-06
  18. Outils

    MuMaker: "Login failed for user 'sa'" although the server runs and the password is right (only one MuMaker build works)

    1. Check that the sa login has rights on the MU databases and that the password in the MuMaker Config.ini is right. 2. If it still says login failed, the MuMaker build does not fit your s...

    ✓ Confirmé par l'auteur du sujetRaGEZONE · 2011-06-30
  19. Installation du serveurIGCNS9

    IGCN S9 E2 repack: 'No active Game Servers found' and disconnect when the server settings use a DDNS hostname

    1. Put the real (numeric) IP address in the GameServer and server list settings instead of the DDNS hostname. 2. Restart the ConnectServer and GameServer and connect again. 3. If you must...

    ✓ Confirmé par l'auteur du sujetRaGEZONE · 2018-12-29
  20. Site webany

    MuCore on a web host cannot connect to the MuOnline database on a Google Cloud VPS (Connection with MuOnline Database Failed), although 1433 is open in Windows.

    1. Enable TCP/IP and Named Pipes for the instance in SQL Server Configuration Manager and restart SQL. 2. Open TCP 1433 in the Windows firewall of the VPS. 3. Also open TCP 1433 in the cl...

    ✓ Confirmé par l'auteur du sujetTuServerMU · 2019-03-17
Toujours bloqué ? Demander à l'Assistant MU Rechercher sur MuGPS Chercher sur MUTube

MuADMINS Community Alpha : gratuit, fait par la communauté, en développement actif.