Community AlphaAlpha MUADMINS
FILFilipino
Mag-sign in
Sa MuADMINSConfig ScannerI-upload ang zip ng mga file mo: rate, drop, spot, limitBuksanSa MuADMINSMakipagkita sa amin sa DiscordHumingi ng tulong, ibahagi ang ginagawa mo at makipag-usap tungkol sa MU sa ibang may-ari ng server.Buksan

MuADMINS

Mga Solusyon

Maiikling fix para sa mga karaniwang problema sa MU Online server, client at website, bawat isa ay may source at petsa. Ang ibig sabihin ng “Kinumpirma” ay sinabi ng nagtanong na gumana ang fix.

17 solusyon para sa “router” · I-clear

  1. Server setup

    Disconnect when entering my own server behind a router, although it worked before (after a Windows startup problem)

    The PC got a different local IPv4 address, so the router's DMZ still pointed to the old one. 1. Open cmd and run ipconfig /all; note the IPv4 address. 2. In the router, set the DMZ (or th...

    ✓ Kinumpirma ng nagsimula ng topicDarksTeam · 2012-04-30
  2. Websiteany

    The MU website opens with the domain on the server PC, but other people see the router page instead of the site

    The hosts file was not the problem: the router forwarded the wrong port. 1. The asker had only port 8080 forwarded in the router, so the site worked locally but not from the internet. 2....

    ✓ Kinumpirma ng nagsimula ng topicTUServerMU · 2020-06-12
  3. Server setupany

    Server on my home PC works for me with the IPv4 address, but friends get disconnected even with ports added to firewall and router. What is wrong?

    1. A private (LAN) address like 192.168.x.x only works inside your own network. 2. For outside players, put your public IP (or a No-IP hostname) in the server side IP settings (ConnectSer...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2019-05-03
  4. Server setupMuEmu / LouisS8

    Two MuEmu S8 servers on one machine: the first works, the second disconnects at login although its ports (55902, 55920, 55961, 55971) are forwarded.

    1. Open the router page and check that the forwarding rules for the second server ports are really enabled, not only created. 2. If a rule turns itself off again after a refresh, delete i...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2020-06-17
  5. Game clientSeason 6

    "Connect Failed" when you start the client on the PC that runs the server (No-IP address)

    With a No-IP (dynamic DNS) name in the client, players outside can connect, but the PC that runs the server often cannot, because most home routers do not route your public address back i...

    ✓ Kinumpirma ng nagsimula ng topicTUServerMU · 2021-04-15
  6. Mga ToolIbang files

    TitanCS launcher auto update works on the server PC but players outside cannot update (FTP on a no-ip domain)

    1. Check the basics first: port 21 open in the firewall (inbound and outbound) and forwarded on the router, and [FtpServerInfo] in Data/SCF_Config.ini of TitanCS filled in (SCFAddress, SC...

    ✓ Kinumpirma ng nagsimula ng topicRaGEZONE · 2015-03-11
  7. Mga ToolS6E3

    P4F Launcher System 2.3 Lite: Run button greyed out, website box empty and error 12029; it only works with the LAN IP

    1. The update server UpdSrv (in the UpdSrv folder of the release) must be configured and running, or the launcher shows no site and no Run button. 2. In UpdSrv set Game File = your main e...

    ✓ Kinumpirma ng nagsimula ng topicRaGEZONE · 2013-06-03
  8. Server setupOpenMUSeason 6 (1.04d client)

    OpenMU in Docker on an OpenWrt VM (VMware, bridged Wi-Fi): the client cannot connect and the log shows InvalidPacketHeaderException.

    1. That logged exception came from an HTTP client hitting the game server port, not from the MU client. 2. The real problem was packet forwarding of the bridged wireless network in VMware...

    ✓ Kinumpirma sa issueGitHub (MUnique/OpenMU) · 2024-04-16
  9. Server setupX-TeamS8

    X-Team MuEmu S8E3: players cannot get in because Mu Hack Protection shows an error, even with the usual ports open.

    1. Open the MHP port 55999 TCP in the firewall and router, besides 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Port 55557 does not need to be opened. 3. Check...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2017-04-21
  10. Server setupMuEmu / LouisS6

    MuEmu S6 (Louis): the client reaches the server selection, but when I pick the server it disconnects. What is missing?

    1. The ConnectServer port works, but the GameServer port (55901 by default) is blocked. 2. For a local test, add an inbound firewall rule for the GameServer port (or briefly turn off Wind...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2018-11-16
  11. Server setupMuEmu / LouisS6

    Friends can join my MuEmu S6 server from outside, but I cannot connect from another PC in the same LAN as the server. Which port is missing?

    1. It is usually not a port: many routers do not let LAN PCs reach their own public IP (no NAT loopback). 2. Use a No-IP hostname as the server address in the ConnectServer server list, m...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2020-07-14
  12. Game clientMuEmu / LouisS6

    Testing a MuEmu S6 server on my home PC with the public IP set everywhere, the client says disconnected when entering. How do I fix it?

    1. For a test on the same PC or LAN, do not use the public IP: your router may not loop traffic back to itself. 2. Replace the public IP with the private IPv4 address of the server PC (se...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2018-10-28
  13. Server setupIGCNS15

    IGCN Season 15: at the 4th class quest phase 4, talking to the NPC to teleport freezes the game and then disconnects the player.

    1. Phase 4 runs on the instance server, whose port was not open. 2. Open the port of the instance GameServer in the Windows firewall (and router or VPS panel if used). 3. Start that serve...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2020-08-03
  14. Server setupMuEmu / LouisS8

    The server works on the host PC, but other players cannot get in (MuEmu S8).

    1. Exclude main.exe from DEP and add the client folder to the antivirus exceptions. 2. Open the antihack port 55999 in the Windows firewall and in the router. 3. Allow ConnectServer and G...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2017-01-18
  15. Mga ToolOpenMU

    OpenMU admin panel: on a fresh install the client cannot reach the server selection. How do I start the listeners and add a game server?

    1. Open Servers (/servers). A fresh install does not start its listeners: start both connect servers and at least one game server. 2. To start them automatically, enable *Auto Start* in t...

    Muling isinulat ng MuADMINS mula sa sourceNot verifiedGitHub (MUnique/OpenMU) · 2026-10-17
  16. Server setupany

    How do I open the MU server ports (44405, 55901, 55919 and others) in Windows Firewall quickly and correctly?

    1. Open PowerShell as administrator on the server. 2. Create one inbound rule for all TCP ports, for example: New-NetFirewallRule -DisplayName "MU Server" -Direction Inbound -Protocol TCP...

    Muling isinulat ng MuADMINS mula sa sourceNot verifiedMicrosoft Learn · 2025-05-14
  17. Server setupany

    My GameServer (port 55901 and up) sometimes fails to start because the port is already in use. How do I check the Windows dynamic port range?

    1. Since Windows Vista and Server 2008, outgoing connections use local ports 49152 to 65535 by default, which includes 55901, 55960, 55970. 2. Show the range: netsh int ipv4 show dynamicp...

    Muling isinulat ng MuADMINS mula sa sourceNot verifiedMicrosoft Learn · 2026-02-12

Mga video sa MUTube

Iba pang video para sa “router”

Naipit pa rin? Magtanong sa MU Assistant Maghanap sa MuGPS

MuADMINS Community Alpha: libre, gawa ng komunidad, at patuloy na dine-develop.