Community AlphaAlpha MUADMINS
FILFilipino
Mag-sign in
Sa MuADMINSConfig ScannerI-upload ang zip ng mga file mo: rate, drop, spot, limitBuksanSa MuADMINSMakipagkita sa amin sa DiscordHumingi ng tulong, ibahagi ang ginagawa mo at makipag-usap tungkol sa MU sa ibang may-ari ng server.Buksan

MuADMINS

Mga Solusyon

Maiikling fix para sa mga karaniwang problema sa MU Online server, client at website, bawat isa ay may source at petsa. Ang ibig sabihin ng “Kinumpirma” ay sinabi ng nagtanong na gumana ang fix.

15 solusyon para sa “mapserverinfo” · I-clear

  1. Server setupany

    Two servers on one VPS: after creating a character (Summoner, Elbeland) the player is sent to the wrong server code from MapServerInfo

    With subservers the main MapServerInfo must know every GameServer. 1. Open the main Data\MapServerInfo. 2. Add the index (server code) lines of every GameServer and every GameServerCS you...

    ✓ Kinumpirma ng nagsimula ng topicTUServerMU · 2021-02-21
  2. Server setup

    Two servers (x100 and x10) on two different VPS: the client only shows one of them in the server list

    1. Let one ConnectServer (on VPS 1, the machine that runs the full server) send the server list for both: add both GameServers to its server list with their server code, IP and port. 2. G...

    ✓ Kinumpirma ng nagsimula ng topicRaGEZONE · 2024-12-10
  3. Mga ToolMuEmu / Louis

    MainInfo and Louis files on a local PC: the game cannot connect to 127.0.0.1 (nothing on 127.0.0.1 works on that PC)

    1. Use the network IP of the PC (the LAN address) instead of 127.0.0.1. 2. Put that IP in MapServerInfo.dat, in the ConnectServer configuration and in MainInfo. 3. Common.dat can stay wit...

    ✓ Kinumpirma ng nagsimula ng topicCreandoMU · 2021-03-26
  4. Server setupMuEmu / LouisSeason 6

    MuEmu S6 with a normal and a VIP server: going from the VIP server to a GameServerCS map and back sends the player to the normal server

    The return server for each map is set in MapServerInfo, and it has to be set in both servers. 1. Open Data\MapServerInfo (MapServerMove section: ServerCode NotMoveOption NextMap NextServe...

    ✓ Kinumpirma ng nagsimula ng topicTUServerMU · 2020-09-25
  5. Server setupX-TeamSeason 15

    X-Team Season 15 files (update 5): GameServer shows a message that something 'does not exist' and will not start

    The error is about the server code and the GameServer common file of the update. 1. Check the ServerCode is the same in ConnectServer\ConnectServer.txt, Data\MapServerInfo and the GameSer...

    ✓ Kinumpirma ng nagsimula ng topicTUServerMU · 2020-08-15
  6. Game client

    The server select screen shows my server as 'Name-12'; how do I make it show 1?

    1. The number after the name is the GameServer code plus 1: code 11 in the ConnectServer server list shows as 12 in the client. That is normal. 2. Change the server code to 0 in the Conne...

    ✓ Kinumpirma ng nagsimula ng topicRaGEZONE · 2018-02-01
  7. Server setupS2

    Season 2 files (KarLi tutorial): everything starts except GameServerCS, which fails

    1. Use your LAN address (192.168.x.x) only in MapServerInfo.dat and in the ConnectServer ServerList.dat. 2. Everywhere else in the server configs and the startup put 127.0.0.1. 3. In main...

    ✓ Kinumpirma ng nagsimula ng topicRaGEZONE · 2018-10-25
  8. Server setupMuEmu / LouisS12

    MuEmu S12: Crywolf and Valley of Loren ended up on server 1 instead of server 20 and their NPCs do not respond

    1. Which GameServer hosts which maps is set in MapServerInfo; an entry there moved these maps to the wrong server. 2. Open MapServerInfo and put Crywolf and Valley of Loren back on the Ga...

    ✓ Kinumpirma ng nagsimula ng topicRaGEZONE · 2018-10-11
  9. Game clientMuEmu / LouisS6

    'You are disconnected from the server' when selecting the server, after the IP was changed in many config files (MuEmu files).

    1. Put your IP only in ConnectServer/ServerList.dat and GameServer Data/MapServerInfo.dat. 2. Leave every other IP entry at 127.0.0.1. 3. If you use the antihack, open its port 55999. 4....

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2021-02-20
  10. Mga ToolMuEmu / LouisSeason 6

    MainInfo (Louis Emulator S6): how to rename the sub servers and remove the '(Gold)' label with ServerList.bmd and CustomServerName.txt

    1. With Pentium Tools open the client Data/Local/ServerList.bmd: it has 3 entries; give all three the same server name (for example MeuServer). 2. On the server, note the number of each s...

    ✓ Kinumpirma ng nagsimula ng topicCreandoMU · 2022-10-09
  11. Server setupclassic (MMT)

    New sub server (MMT files) gives a bind error and restarts.

    1. The sub server used the same port as the main one. 2. Give it its own port (for example 55903) and open it in the firewall. 3. Change its ServerCode in ServerList and MapServerInfo and...

    ✓ Kinumpirma ng nagsimula ng topicImperyus Games Brasil · 2009-10-30
  12. Server setupMuEmu / LouisSeason 6

    Legion Team (Rodrigo117) files: GameServerCS shows an error at start while the normal GameServer runs

    The common config of the GameServers was incomplete, so the normal GameServer and GameServerCS tried to use the same (wrong) port. 1. Open the common config file of each GameServer (norma...

    ✓ Kinumpirma ng nagsimula ng topicTUServerMU · 2020-08-06
  13. Server setupMuEmu / LouisS8

    Two MuEmu S8 servers on one machine: the first works, the second disconnects at login although its ports (55902, 55920, 55961, 55971) are forwarded.

    1. Open the router page and check that the forwarding rules for the second server ports are really enabled, not only created. 2. If a rule turns itself off again after a refresh, delete i...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2020-06-17
  14. Game clientIGCNS12

    IGCN Season 12: the server runs, but after loading the client says the game needs to be updated.

    1. Open IGCData/IGC_MapServerInfo.xml on the server and read the client version and serial. 2. Put the same IP, version and serial in the client info editor (serverinfo generator). 3. Gen...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2019-04-06
  15. Server setup

    JoinServer and DataServer cannot connect to the database although the backup is restored

    These files had the database name MuOnlineS6 in the server configs while the database was restored as MuOnline, so the servers looked for a database that does not exist. 1. In SQL Server...

    ✓ Kinumpirma ng nagsimula ng topicTUServerMU · 2018-09-27
Naipit pa rin? Magtanong sa MU Assistant Maghanap sa MuGPS Maghanap sa MUTube

MuADMINS Community Alpha: libre, gawa ng komunidad, at patuloy na dine-develop.