MuADMINS
Soluciones
Arreglos breves para problemas comunes de servidores, clientes y sitios web de MU Online, cada uno con su fuente y su fecha. “Confirmado” significa que la persona que preguntó dijo que el arreglo funcionó.
17 soluciones para “55901” · Limpiar
Client disconnects after choosing the server; the client log shows it connecting to someone else's IP (10.0.0.33, port 55901) with Pinkof Season 2 files
The server files and the client still pointed to the IP of the person who packed them. 1. Put your own IP in the ConnectServer server list config. 2. Put your own IP in the JoinServer con...
✓ Confirmado por el autor del temaDarksTeam · 2015-02-13With the firewall turned on nobody can enter my server or my website; with it off they can
The firewall blocks the server ports. 1. In the firewall allow (unblock) TCP 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Also allow port 80 for the website. 3....
✓ Confirmado por el autor del temaDarksTeam · 2012-07-14Legion Team (Rodrigo117) files: GameServerCS shows an error at start while the normal GameServer runs
The common config of the GameServers was incomplete, so the normal GameServer and GameServerCS tried to use the same (wrong) port. 1. Open the common config file of each GameServer (norma...
✓ Confirmado por el autor del temaTUServerMU · 2020-08-06How do I open the MU server ports (44405, 55901, 55919 and others) in Windows Firewall quickly and correctly?
1. Open PowerShell as administrator on the server. 2. Create one inbound rule for all TCP ports, for example: New-NetFirewallRule -DisplayName "MU Server" -Direction Inbound -Protocol TCP...
My GameServer (port 55901 and up) sometimes fails to start because the port is already in use. How do I check the Windows dynamic port range?
1. Since Windows Vista and Server 2008, outgoing connections use local ports 49152 to 65535 by default, which includes 55901, 55960, 55970. 2. Show the range: netsh int ipv4 show dynamicp...
OpenMU worked before, but after the PC ran for a while the game server cannot listen on 55901 or players cannot connect. Why?
1. Ports 49152 to 65535 are the Windows dynamic range used for outgoing connections, so another process can already hold 55901 and up. 2. Newer OpenMU databases use 45901 to 45906 for gam...
Client disconnects right after choosing the server (server on a VPS)
The server list shows, so the ConnectServer port is open, but the client is dropped when it moves on to the GameServer: the GameServer port is closed somewhere. 1. Find the GameServer por...
✓ Confirmado por el autor del temaTUServerMU · 2023-09-16OpenMU Network Analyzer (MUnique): how to capture and read the packets between a MU client and a game server
1. The analyzer is a proxy: it listens for the client, connects to the real server and forwards, decrypts and encrypts all traffic so you can read it. 2. Enter the local port it should li...
[P4F] Launcher System 0.9.1 (free): how to make it start a main.exe that needs the server IP and port as parameters
1. The free P4F launcher (Launcher System 0.9.1 by Killbrum, with auto update) works with any MU version; its settings editor saves the configuration in its own format so players cannot r...
P4F Launcher System 2.3 Lite: Run button greyed out, website box empty and error 12029; it only works with the LAN IP
1. The update server UpdSrv (in the UpdSrv folder of the release) must be configured and running, or the launcher shows no site and no Run button. 2. In UpdSrv set Game File = your main e...
✓ Confirmado por el autor del temaRaGEZONE · 2013-06-03GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)
The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...
✓ Confirmado por el autor del temaDarksTeam · 2008-06-03X-Team MuEmu S8E3: players cannot get in because Mu Hack Protection shows an error, even with the usual ports open.
1. Open the MHP port 55999 TCP in the firewall and router, besides 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Port 55557 does not need to be opened. 3. Check...
✓ Confirmado por el autor del temaTuServerMU · 2017-04-21The client says "You are disconnected from the server" although the IPs, ah.info and main.info look correct. Where should I look?
1. Check that the basic ports are open: ConnectServer (44405) and GameServer (55901, 55919 for the CS server). 2. Open the client main.info settings again and check every value: IP, port...
✓ Confirmado por el autor del temaTuServerMU · 2019-04-30MuEmu S6 on a VPS: the client works inside the VPS, but from home it shows the antihack logo, says it could not connect and closes.
1. When it works on the VPS itself but not from outside, the Windows Firewall of the VPS is the usual cause. 2. On the VPS, create inbound TCP allow rules for the ConnectServer port (4440...
✓ Confirmado por el autor del temaTuServerMU · 2018-11-18MuEmu S6 (Louis): the client reaches the server selection, but when I pick the server it disconnects. What is missing?
1. The ConnectServer port works, but the GameServer port (55901 by default) is blocked. 2. For a local test, add an inbound firewall rule for the GameServer port (or briefly turn off Wind...
✓ Confirmado por el autor del temaTuServerMU · 2018-11-16ConnectServer Cross-Platform (MuEmu kayito): how do I build and run the ConnectServer natively on Linux?
1. Install the build tools: on Ubuntu or Debian sudo apt install build-essential cmake libboost-all-dev (CentOS: gcc-c++ cmake boost-devel; Arch: base-devel cmake boost). On Windows use V...
Reescrito por MuADMINS a partir de la fuenteNot verifiedGitHub (alisacorporation/ConnectServer) · 2025-11-02OpenMU: the client cannot connect when the server and the client run on the same PC
The original client blocks the address 127.0.0.1. OpenMU documentation: use any 127.x.x.x address except 127.0.0.1. 1. Start OpenMU and check in the admin panel (port 80) that the connect...
Videos en MUTube
Es necesario abrir puertos para montar un server de MuOnline en modo local? y hacer pruebas?? :D
Josue Ochoa · 8:20 · 2021
Como Abrir Los Puertos Para MuOnline
Mukka 14 · 2:57 · 2013
Cómo abrir puertos para MuOnline (y otros juegos)
MuADMINS · 10:26 · 2014
NADA DE ABRIR PUERTOS NI DE IP ESTATICA | HAMACHI +MU ONLINE
Xiris · 11:07 · 2024