MuADMINS
Soluciones
Arreglos breves para problemas comunes de servidores, clientes y sitios web de MU Online, cada uno con su fuente y su fecha. “Confirmado” significa que la persona que preguntó dijo que el arreglo funcionó.
108 soluciones para “serverlist” · Limpiar
How to protect the server from attackers with the firewall
Only the ConnectServer and GameServer must be reachable from outside. 1. In the firewall block outside access for: MySQL (mysqld.exe), the DataServer(s), ExDB, EventServer, RankingServer,...
✓ Confirmado por el autor del temaDarksTeam · 2008-06-30"login server connect fail" when the server starts the GameServer
The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...
✓ Confirmado por el autor del temaDarksTeam · 2009-11-04With the firewall turned on nobody can enter my server or my website; with it off they can
The firewall blocks the server ports. 1. In the firewall allow (unblock) TCP 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Also allow port 80 for the website. 3....
✓ Confirmado por el autor del temaDarksTeam · 2012-07-14S6 Ep3 files: killing monsters lowers the experience bar instead of raising it
The experience formula constants were changed by mistake. 1. Open the GameServer common config (GameServerInfo - Common) and find the experience section. 2. Put the experience constant va...
✓ Confirmado por el autor del temaTUServerMU · 2021-01-08MuEmu: the reset limit was set to 30 but a character with 30 resets can still /reset to 31
1. Open MuServer\GameServer\Data\GameServerInfo - Command.txt (reset command section). 2. Set the general limit CommandResetLimit for every account level (AL0 to AL3) to 30; this was the...
✓ Confirmado por el autor del temaTUServerMU · 2020-11-02Legion Team (Rodrigo117) files: GameServerCS shows an error at start while the normal GameServer runs
The common config of the GameServers was incomplete, so the normal GameServer and GameServerCS tried to use the same (wrong) port. 1. Open the common config file of each GameServer (norma...
✓ Confirmado por el autor del temaTUServerMU · 2020-08-06Anyone can log in with a random account name and password, and the login creates that account in SQL
1. This is not a database bug: the server has automatic account registration switched on, so an unknown login is created on the spot. 2. Open the JoinServer config (in some files the opti...
✓ Confirmado por el autor del temaRaGEZONE · 2021-04-15X-Team MuEmu S8E3: players cannot get in because Mu Hack Protection shows an error, even with the usual ports open.
1. Open the MHP port 55999 TCP in the firewall and router, besides 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Port 55557 does not need to be opened. 3. Check...
✓ Confirmado por el autor del temaTuServerMU · 2017-04-21Kayito MuEmu 0.97k download has no JoinServer and DataServer folders. Where are they?
1. First choose your database engine: SQL Server or MySQL. 2. For SQL Server copy JoinServer and DataServer from the MSSQL folder; for MySQL take them from the MySQL folder. 3. Put both n...
✓ Confirmado en el issueGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2025-06-22The client says "You are disconnected from the server" although the IPs, ah.info and main.info look correct. Where should I look?
1. Check that the basic ports are open: ConnectServer (44405) and GameServer (55901, 55919 for the CS server). 2. Open the client main.info settings again and check every value: IP, port...
✓ Confirmado por el autor del temaTuServerMU · 2019-04-30MuEmu S6 on a VPS: the client works inside the VPS, but from home it shows the antihack logo, says it could not connect and closes.
1. When it works on the VPS itself but not from outside, the Windows Firewall of the VPS is the usual cause. 2. On the VPS, create inbound TCP allow rules for the ConnectServer port (4440...
✓ Confirmado por el autor del temaTuServerMU · 2018-11-18The open source C# MuEmu project (Yomalex) shows a startup error and the game server does not start.
1. Copy the Data folder from the repository into the same folder as the MuEmu binary. 2. Make the APIKey in MuEmu Server.xml equal to the apiKey in the CSEmu configuration.xml (example: a...
✓ Confirmado en el issueGitHub (Yomalex/MuEmu) · 2024-09-14MuEmu S6: where to change the success rate of Jewel of Harmony refining (Elphis) and refining stones (Osbourne)?
1. Open the ChaosMix settings in GameServer/DATA (GameServerInfo - ChaosMix). 2. JewelOfHarmonyItemPurityMixRate_AL0 to _AL3 set the gemstone to Harmony rate per account level. 3. JewelOf...
✓ Confirmado por el autor del temaTuServerMU · 2020-09-11Louis S6 Ep3: after /reset the character gets a huge or negative Zen amount (shows -7000 in the database).
1. The Zen cost was set in two places that conflicted for /reset. 2. Set the MoneyReq columns of the reset command line in Command.txt to 0. 3. Keep the reset Zen cost only in GameServerI...
✓ Confirmado por el autor del temaTuServerMU · 2024-08-24Louis (MuEmu) server ran out of item serials: every new item gets serial FFFFFFFF and is flagged as a dupe.
1. Serials come from the stored procedure WZ_GetItemSerial, which increments ItemCount in table GameServerInfo for every created item (drops, bags, commands). 2. Edit that existing proced...
✓ Confirmado por el autor del temaRaGEZONE · 2024-08-02The server works on the host PC, but other players cannot get in (MuEmu S8).
1. Exclude main.exe from DEP and add the client folder to the antivirus exceptions. 2. Open the antihack port 55999 in the Windows firewall and in the router. 3. Allow ConnectServer and G...
✓ Confirmado por el autor del temaTuServerMU · 2017-01-18The server shows online but the login box never appears; after a few seconds the client disconnects (Louis S6 Premium Update 13).
1. In MAIN_INFO MainInfo.ini use the same CustomerName, Version and Serial as GameServer and GameServerCS (Data/GameServerInfo - Common.dat), plus your server IP. 2. Generate; main.premiu...
✓ Confirmado por el autor del temaTuServerMU · 2019-09-08HashCalculator (DaoVanTrong): how to make the auto update file list (List.inf for Webzen mu.exe, or CRC32 / MD5 / SHA1 lists)
1. Drag the client folder (or your update folder, or any folder) onto the HashCalculator program icon: it calculates the codes at once and writes the report files. If you drag nothing, it...
MuClientTools16: how do I open Season 16 client files (Lang.mpr, data BMDs, OZJ/OZT textures, BMD models, map files)?
1. The tools target the Season 16 part 1.1 client (Lgd_Test 1.19.46); files of older or newer versions might or might not work. 2. Data files: the tools decode and encode the 45 data BMDs...
Reescrito por MuADMINS a partir de la fuenteNot verifiedGitHub (VDraven/MuClientTools16) · 2022-07-08Repack Zero Launcher (MuEmu / IGK): how to publish an update with VEREXE.txt and ParcheX.zip, and how to change its background
1. On the hosting, edit VEREXE.txt inside the Launcher folder and raise the number by one for each new update (1 becomes 2 and so on). 2. Put the files to update in a zip named ParcheX.zi...