Community AlphaAlpha MUADMINS
DEDeutsch
Anmelden
Auf MuADMINSConfig ScannerZip deiner Dateien hochladen: Rates, Drops, Spots, LimitsÖffnenAuf MuADMINSTriff uns auf DiscordFrag nach Hilfe, zeig, woran du arbeitest, und sprich mit anderen Serverbetreibern über MU.Öffnen

MuADMINS

Lösungen

Kurze Fixes für häufige Probleme mit Server, Client und Website bei MU Online, jeweils mit Quelle und Datum. “Bestätigt” heißt: Die Person, die gefragt hat, hat gesagt, dass der Fix funktioniert hat.

588 Lösungen für “server.xml” · Zurücksetzen

  1. Server-SetupMuEmu / LouisSeason 6 (Louis)

    JoinServer and DataServer show "[SocketManager] WSAAccept() failed with error: 10061" on start.

    1. Check DataServerAddress in common.dat. 2. Leave it at the default 127.0.0.1, it does not need your public IP. 3. Start the servers again.

    ✓ Vom Threadersteller bestätigtCreandoMU · 2022-02-21
  2. Server-SetupS3E1 (1.04H)

    GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)

    The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2008-06-03
  3. Server-Setup99b

    GameServer.exe loads for a long time and then Windows shows "Send error report / Don't Send" with every server pack

    The PC was infected with the Win32.Parite (A to C) file infector, which damages .exe files. 1. Download a Parite removal tool (the thread used AntiParite) and let it scan the processes. 2...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2008-06-19
  4. Server-SetupS2 (1.03N)

    Season 2 (1.03N): the server shows as full with Loading behind it when I click it

    1. Open GameServer\Data\ServerInfo.dat. 2. Find VirtualPlayerNum = 200 and change it to VirtualPlayerNum = 0. 3. Restart the GameServer.

    ✓ Vom Threadersteller bestätigtDarksTeam · 2008-06-27
  5. Server-Setup

    How to protect the server from attackers with the firewall

    Only the ConnectServer and GameServer must be reachable from outside. 1. In the firewall block outside access for: MySQL (mysqld.exe), the DataServer(s), ExDB, EventServer, RankingServer,...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2008-06-30
  6. Gameplay1.0L

    1.0L server: a Blade Knight with max stats starts Twisting Slash, then the animation stops as if the attack speed is too high

    The attack speed limits in the GameServer config are too low for high stats. 1. Open commonserver.cfg. 2. Set the speed block like the answer: AttackSpeedTimeLimit = 2300, IsIgnorePacketH...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2008-12-31
  7. Server-Setup

    Where to change the maximum number of users online (the GameServer shows 6500)

    1. Open the server's Data\commonserver.cfg. 2. Find NumberOfMaxUser and set the value you want. 3. Restart the GameServer.

    ✓ Vom Threadersteller bestätigtDarksTeam · 2009-01-18
  8. Server-SetupS2

    Season 2 server (SrTeam files) freezes after 2 to 3 hours: login just hangs

    The freeze came from the MonsterSetBase file. 1. Replace MonsterSetBase.txt with another, clean one (for example the original of the files). 2. Restart the server and watch it for a few h...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2009-02-27
  9. Server-Setup

    All servers start fine, but in game after pressing Connect it says "You are disconnected from the server"

    The ConnectServer files still had a wrong IP. 1. Edit these files and put your local IP in each: D:\MuServer\CS\Connectserverlist, D:\MuServer\CS\Data\Connectserverlist, D:\MuServer\CS\Da...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2009-05-24
  10. Server-Setup

    Event server (Devil Square ranking) error: it looks for the wrong database

    1. Open the event server config svconfig.ini. 2. Change mu2003_dsn = Ranking to mu2003_dsn = MuOnline (the data source that really exists). 3. Restart the event server.

    ✓ Vom Threadersteller bestätigtDarksTeam · 2009-10-08
  11. Server-Setup

    "login server connect fail" when the server starts the GameServer

    The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2009-11-04
  12. Server-Setup

    SQL Server 2000 setup says there is not enough free disk space although 60 GB are free

    1. Extract the SQL Server 2000 installer files with WinRAR into a normal folder. 2. Run setup from that extracted folder.

    ✓ Vom Threadersteller bestätigtDarksTeam · 2010-08-08
  13. Server-Setup

    How to change the ConnectServer port 44405, and login fails after changing it

    1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2010-12-21
  14. Server-Setup97d+99i

    GameServer error at start with DarkMaster 97d+99i Beta 13 files, fixed by turning off the EventChip server connection

    1. Open Data\commonserver.cfg. 2. Find EventChipServerConnect = 1 and change it to EventChipServerConnect = 0. 3. Restart the GameServer.

    ✓ Vom Threadersteller bestätigtDarksTeam · 2011-04-23
  15. Server-Setup

    GameServer starts normally but crashes after a few minutes

    1. First read the GameServer logs: a broken event (Blood Castle, Devil Square) can stop the GS. 2. In this case the events and the GameServer were fine: the culprit was the ConnectServer....

    ✓ Vom Threadersteller bestätigtDarksTeam · 2011-05-11
  16. Server-Setup0.99.62T (1.0M)

    JoinServer shows an error at start with the DarksTeam 0.99.62T release files

    The JoinServer was started directly, without its start parameters. 1. Do not run joinserver.exe by itself; start it from StartUp.exe. 2. In StartUp.exe give the JoinServer the parameters...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2012-09-08
  17. Server-SetupS2

    Client disconnects after choosing the server; the client log shows it connecting to someone else's IP (10.0.0.33, port 55901) with Pinkof Season 2 files

    The server files and the client still pointed to the IP of the person who packed them. 1. Put your own IP in the ConnectServer server list config. 2. Put your own IP in the JoinServer con...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2015-02-13
  18. Server-Setup97d+99i

    "error-L1 : CloseClient INVALID_SOCKET": after some time online the GameServer disconnects all players (97d+99i, after moving from Windows Server 2003 to Windows Server 2012 R2)

    Reinstalling Windows, all updates and compatibility modes did not help; the fix was the newer DLL for the files. 1. Download the newer DLL that the developer uploaded for these 97d+99i fi...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2017-02-14
  19. Server-Setup

    What does UseNPGGChecksum in commonserver.cfg do?

    1. UseNPGGChecksum is for nProtect GameGuard, the official anti cheat; private servers do not use it, so leave it off. 2. It is not the normal main checksum: that one needs a checksum fil...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2018-10-02
  20. Website

    Website error "Fatal error: Call to undefined function mssql_connect()" (XAMPP 1.7.7, SQL Server 2008, DarksWeb 0.3)

    New XAMPP builds no longer have the mssql_* functions these old sites use. 1. Install XAMPP 1.7.1 (said to be the last one with mssql_*), or add code that defines those functions to the s...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2019-02-07

MuADMINS Community Alpha: kostenlos, von der Community gemacht, in aktiver Entwicklung.