Community AlphaAlpha MUADMINS
VITiếng Việt
Đăng nhập
Trên MuADMINSConfig ScannerTải lên zip file của bạn: rate, rơi đồ, spot, giới hạnMởTrên MuADMINSGặp chúng tôi trên DiscordNhờ giúp đỡ, chia sẻ những gì bạn đang làm và trò chuyện về MU với các chủ server khác.Mở
← Tất cả giải pháp

main.exe hex edit: how to change the serial and the connect IP of an old main (1.02 / 1.03 era) with a hex editor

MuADMINS biên soạn từ nguồnNot verified

Công cụ: Hex editor (main.exe)

  1. Open main.exe in a hex editor, press Ctrl+F, tick Find ASCII and search failed to connect: the 16 character serial is next to it.
  2. Replace the serial with your own using exactly 16 characters (same length, do not add or remove bytes).
  3. For the IP search connect.muonline.co.kr and type your IP over it.
  4. If your IP is shorter, fill the rest of the old text with 00 bytes in the hex part.
  5. The version is a 5 character code near the same place: 1.03c = 1.03.03, and 10303 minus 10000 plus 22345 gives 22648. Back the other way: 22696 minus 22345 plus 10000 = 10351, so 1.03.51 (1.03Z+). Packed mains do not show these strings until they are unpacked.
RaGEZONE · 2007-08-19
Cách này có giúp được bạn không?

Vẫn còn vướng mắc? Tìm trên MuGPS Hỏi Trợ lý MU

MuADMINS Community Alpha: miễn phí, do cộng đồng xây dựng, đang được phát triển tích cực.