Community AlphaAlpha MUADMINS
FILFilipino
Mag-sign in
Sa MuADMINSConfig ScannerI-upload ang zip ng mga file mo: rate, drop, spot, limitBuksanSa MuADMINSMakipagkita sa amin sa DiscordHumingi ng tulong, ibahagi ang ginagawa mo at makipag-usap tungkol sa MU sa ibang may-ari ng server.Buksan

MuADMINS

Mga Solusyon

Maiikling fix para sa mga karaniwang problema sa MU Online server, client at website, bawat isa ay may source at petsa. Ang ibig sabihin ng “Kinumpirma” ay sinabi ng nagtanong na gumana ang fix.

51 solusyon para sa “ServerList” para sa IGCN at kahit anong files · I-clear

  1. Server setup

    Two servers (x100 and x10) on two different VPS: the client only shows one of them in the server list

    1. Let one ConnectServer (on VPS 1, the machine that runs the full server) send the server list for both: add both GameServers to its server list with their server code, IP and port. 2. G...

    ✓ Kinumpirma ng nagsimula ng topicRaGEZONE · 2024-12-10
  2. Mga ToolS6

    MagicHand does not work to edit ServerList.bmd of a Season 6 client

    1. MagicHand is a PHP editor: it does not run by opening its files directly. Put it in the XAMPP htdocs folder, next to your web site files. 2. Start Apache in XAMPP and open the editor f...

    ✓ Kinumpirma ng nagsimula ng topicRaGEZONE · 2011-05-27
  3. Mga Tool

    ServerList Editor: how to mark a server as Gold, Gold PVP, Non-PVP or Normal in ServerList.bmd

    1. Install .NET Framework 2.0 (x86 or x64) and open your ServerList.bmd with the editor (English language was added in update 1). 2. The table columns 1 to 15 are the server indexes insid...

    Muling isinulat ng MuADMINS mula sa sourceNot verifiedRaGEZONE · 2012-02-18
  4. Mga ToolIGCN

    IGC Dashboard: how to configure the client patch (ServerInfo Dashboard section, ConnectServer config.ini, setting.json)

    1. In ServerInfo.xml set the <Dashboard Run="1" ExeName="Dashboard.exe" Path="Dashboard" IsNative="1" LauncherProxyConnectServerID="-1" MainProcessName="main" MemoryShareName="IGCDashBoar...

    Muling isinulat ng MuADMINS mula sa sourceNot verifiedIGCN · 2024-10-29
  5. Mga ToolIGCN

    IGC.ToolKit: where to set the server IP, port, version and serial of an IGCN client (ServerInfo.xml to ServerInfo.bmd)

    1. Extract the game client on a normal PC (not on the Windows Server machine) and copy the content of \Client\Client Patch\ from the server package over it. 2. Open \Data\Local\ServerInfo...

    Muling isinulat ng MuADMINS mula sa sourceNot verifiedIGCN · 2022-09-15
  6. Mga ToolIGCN

    IGC.ToolKit: how to set the client language and code page (config.ini Language Set or ServerInfo.xml) and encode ServerInfo.bmd

    1. Versions 21.1.2.3 and newer: in the client config.ini, section [Language], set Set (up to 6 languages, one character each, for example 76201A = ANSI, Russian, Chinese Simplified, Thai,...

    Muling isinulat ng MuADMINS mula sa sourceNot verifiedIGCN · 2022-09-16
  7. Game clientS6

    How do I change the server name shown in the client server list?

    1. Season 6 clients: the name is in Client\Data\Local\ServerList.bmd. 2. Open it with MagicHand: Files BMD > ServerList > Edit File ServerList.bmd, load your file, edit the name and save....

    ✓ Kinumpirma ng nagsimula ng topicRaGEZONE · 2012-11-25
  8. Mga Tool

    Img Convert Tools: how to turn a PNG server logo into TGA and then OZT for the Select Server screen

    1. Convert the PNG logo to TGA first: few MU tools convert PNG to TGA, so the moderator uses an online converter (convertio.co, PNG to TGA). 2. Open MuOnline Img Convert Tools (TUServerMU...

    ✓ Kinumpirma ng nagsimula ng topicTUServerMU · 2020-10-27
  9. Server setup

    How to change the ConnectServer port 44405, and login fails after changing it

    1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...

    ✓ Kinumpirma ng nagsimula ng topicDarksTeam · 2010-12-21
  10. Server setupany

    Two servers on one VPS: after creating a character (Summoner, Elbeland) the player is sent to the wrong server code from MapServerInfo

    With subservers the main MapServerInfo must know every GameServer. 1. Open the main Data\MapServerInfo. 2. Add the index (server code) lines of every GameServer and every GameServerCS you...

    ✓ Kinumpirma ng nagsimula ng topicTUServerMU · 2021-02-21
  11. Server setupany

    ConnectServer and GameServer drop every few hours with WSASend error 10054 and protocol header errors once many players join.

    1. Check the real player limit of your files: these were built for 250 users, not 1000. 2. Above that number the server falls over. 3. Add a sub server (another GameServer) to spread play...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2021-05-30
  12. Server setupIGCNS9

    IGCN S9 E2 repack: 'No active Game Servers found' and disconnect when the server settings use a DDNS hostname

    1. Put the real (numeric) IP address in the GameServer and server list settings instead of the DDNS hostname. 2. Restart the ConnectServer and GameServer and connect again. 3. If you must...

    ✓ Kinumpirma ng nagsimula ng topicRaGEZONE · 2018-12-29
  13. Game clientIGCNS12

    IGCN Season 12: the server runs, but after loading the client says the game needs to be updated.

    1. Open IGCData/IGC_MapServerInfo.xml on the server and read the client version and serial. 2. Put the same IP, version and serial in the client info editor (serverinfo generator). 3. Gen...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2019-04-06
  14. Mga ToolIGCNS9

    myheart's MU Launcher repacked for IGCN S9: how to force players to start the game through the launcher

    1. The repack (by Desperate) adds auto update, resolution, window mode and serial key sync with main.exe for the IGCN Season 9 client only; IGCN uses its own resolution system, so it does...

    Muling isinulat ng MuADMINS mula sa sourceNot verifiedRaGEZONE · 2020-08-28
  15. Mga ToolIGCN

    IGC Dashboard: how to assign the dashboard license to a server license (Link URL) and when the servers must be restarted

    1. You need an unassigned dashboard license. 2. In the server license data form open the dropdown and click Assign Dashboard. 3. Fill Link URL with the web address where your dashboard is...

    Muling isinulat ng MuADMINS mula sa sourceNot verifiedIGCN · 2024-10-30
  16. Mga ToolSeason 4

    Pentium Tools / text.bmd (Season 4 client without serverlist.bmd): how to change the words shown next to each server, for example slow and fast

    1. Searching and editing the words in text.bmd alone did not change the list for the asker. 2. Give the server the code 20 both in the ConnectServer server list and in the ServerInfo file...

    ✓ Kinumpirma ng nagsimula ng topicTUServerMU · 2017-08-21
  17. Server setupclassic (MMT)

    New sub server (MMT files) gives a bind error and restarts.

    1. The sub server used the same port as the main one. 2. Give it its own port (for example 55903) and open it in the firewall. 3. Change its ServerCode in ServerList and MapServerInfo and...

    ✓ Kinumpirma ng nagsimula ng topicImperyus Games Brasil · 2009-10-30
  18. Server setupclassic

    How do I show sub servers grouped under one server in the list?

    1. In Connectserverlist.dat the codes are 0, 1, 2... 2. Change them to 0, 21, 41, 61 (steps of 20). 3. The ConnectServer then reads them as rooms of the servers.

    ✓ Kinumpirma ng nagsimula ng topicImperyus Games Brasil · 2010-12-14
  19. Server setup

    All servers start fine, but in game after pressing Connect it says "You are disconnected from the server"

    The ConnectServer files still had a wrong IP. 1. Edit these files and put your local IP in each: D:\MuServer\CS\Connectserverlist, D:\MuServer\CS\Data\Connectserverlist, D:\MuServer\CS\Da...

    ✓ Kinumpirma ng nagsimula ng topicDarksTeam · 2009-05-24
  20. Game clientSeason 6

    Two separate servers (not subservers) both show in the client as server 1 with the same name

    The client serverlist file was broken, not the server codes. 1. Replace the client Data serverlist.bmd with a working one (for example from another client of the same version) and edit th...

    ✓ Kinumpirma ng nagsimula ng topicTUServerMU · 2021-06-18

Mga video sa MUTube

Iba pang video para sa “ServerList”

Naipit pa rin? Magtanong sa MU Assistant Maghanap sa MuGPS

MuADMINS Community Alpha: libre, gawa ng komunidad, at patuloy na dine-develop.